Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
Company Directory
Vishay Electronic
Geheimrat-Rosenthal-Str. 100
Selb
D-95100
Germany
[t] +49 9287 71 0
[f] +49 9287 70 435
Vishay Transducers is a division of Vishay Measurements Group. Vishay Measurements Group develops, manufactures, and markets a broad range of sensors for a wide variety of test and measurement applications. These include electrical resistance strain gages for both stress analysis testing and transducer manufacturing applications, load cells for approved weighing applications, force transducers, instrumentation, hybrid strain gage assemblies and bonding services.

Vishay, a Fortune 1,000 Company listed on the NYSE, is one of the world's largest manufacturers of discrete semiconductors (diodes, rectifiers, transistors, optoelectronics, and selected ICs) and passive electronic components (resistors, capacitors, inductors, and transducers). The Company's components can be found in products manufactured in a very broad range of industries worldwide. Vishay is headquartered in Malvern, Pennsylvania, and has operations in 17 countries employing over 26,000 people.
New Vishay Siliconix synchronous buck step-down controller
08 April, 2007
Vishay Intertechnology, Inc. released two new synchronous buck step-down controller ICs designed to operate with external MOSFETs, and a minimum of external components, in dc to dc converter circuits that require output currents upwards of 10 A.
New Vishay siliconix boost converter ICs provide 85 % efficiency at 500 mA down to 1 mA
07 April, 2007
Vishay Intertechnology, Inc. announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V.
New CDHV thick film chip resistor dividers deliver <0.03 % ratio stability with Voltages up to 3 kV
06 April, 2007
Vishay Intertechnology, Inc. announced the CDHV, a surface-mount chip resistor divider with a small size profile that achieves outstanding ratio stability under high voltages. The new resistor divider is designed for use in high-voltage power supplies, power switching equipment, and inverter controls.
Devices feature high-current-density performance up to 100 V & 12 A
06 March, 2007
Vishay Intertechnology, Inc. launched a new miniature package type for its Trench MOS Barrier Schottky and planar Schottky rectifiers that enables higher-current-density power supply designs with its compact dimensions and ability to handle up to 100 V and 12 A.
New Vishay FunctionPAK
05 March, 2007
Vishay Intertechnology, Inc. announced that it is making all of its FunctionPAK
New modules offer 3-V and 5-V versions with frequencies from 30 kHz to 56 kHz
04 March, 2007
Vishay Intertechnology, Inc. announced the release of eight new series of infrared receiver modules in a new Minicast package type, featuring high immunity against EMI and a high-precision band filter.
Vishay
03 March, 2007
Vishay Intertechnology, Inc. released two new families of p-channel load switches optimized for high-side operation in 1.5 V to 5 V load-switching applications. The SiP4280A and SiP4282 devices will be used to turn on and turn off the power for the display, speakerphone, memory cards, and other such functions in portable electronic systems such as cell phones, digital still cameras, hot-swap power supplies, notebook computers, and PDAs.
New 3-Pin modules optimized for pulse-distance coding up to 35 meters
02 March, 2007
Vishay Intertechnology, Inc. announced the addition of four new modules featuring superior performance for pulse-distance coding to its TSOP1xxxx series of IR receivers.
New modules offer 3-V and 5-V versions with frequencies from 30 kHz to 56 kHz
01 March, 2007
Vishay Intertechnology, Inc. announced the release of eight new series of infrared receiver modules in a new Minicast package type, featuring high immunity against EMI and a high-precision band filter.
New device touts 18-meter remote control distance and an IrDA data rate of up to 4 Mbit/s
28 February, 2007
Vishay Intertechnology is broadening its optoelectronics portfolio with a new device integrating a Remote Control receiver and an IrDA transceiver into a single, 3-lens, surface-mount package for the PC market.
New thermal models for Vishay optocoupler products reduce design time
27 February, 2007
Vishay Intertechnology, Inc. announced that it is now providing detailed thermal characteristics for newly released optocouplers and solid-state relays that have total power dissipation of 200 mW and higher. Vishay is the first optocoupler and SSR manufacturer in the industry to provide thermal models, which significantly reduce design time for customers.
New ThermaSim TM, on-line simulation tool to use finite element analysis Models for increased accuracy
26 February, 2007
A web-based tool that gives designers a detailed simulation of how Vishay Siliconix MOSFETs will perform thermally and be affected by adjacent components in a wide range of applications is now available on the web site of Vishay Intertechnology, Inc.
New Vishay Siliconix dual SPDT and dual SPST analog switches target portable systems
19 December, 2006
Vishay Intertechnology, Inc. released a family of new dual SPDT and dual SPST analog switches designed for audio, video, and data stream applications. Offering low on-resistance and high bandwidth in the space-saving MICRO FOOT package through the full voltage range of 1.8 V to 5.5 V, the six new switches are aimed at end products including cell phones, PDAs, media players, and notebook computers.
Vishay announced that it is shipping the first two power MOSFETs
18 December, 2006
Vishay Intertechnology, Inc. announced that it is shipping the first two power MOSFETs to be offered in its innovative PolarPAK package, which uses double-sided cooling to reducing thermal resistance, package resistance, and package inductance for a more efficient, faster switching power MOSFET.
Vishay expands IHLP family of low-profile, high-current inductors
17 December, 2006
Vishay Intertechnology, Inc. announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering inductance values from 10
Vishay licenses its TrenchFET Power MOSFET technology to KEC
16 December, 2006
KEC and Vishay Intertechnology, Inc. announce that they have signed an agreement under which Vishay will license its Vishay Siliconix TrenchFET power MOSFET technology to KEC.
Vishay receives Pinnacle Award from Delphi for outstanding quality performance
15 December, 2006
Vishay Intertechnology, Inc. is pleased to announce that it has been selected to receive Delphi Corporation's 2006 Pinnacle Award. The award from Delphi, a world leader in mobile electronics and transportation components and systems technology, recognizes suppliers primarily for their outstanding quality performance or quality improvement. Vishay is one of the world's largest manufacturers of discrete semiconductors and passive electronic components.
Vishay announces the release of new Hi-Rel COTS T83 series solid tantalum chip capacitors
14 December, 2006
Vishay Intertechnology, Inc. announced the release of new Hi-Rel COTS T83 series solid tantalum chip capacitors, designed to provide high reliability and a choice of standard and low-ESR values in five different case sizes.
Isolated synchronous half-bridge DC/DC controller provides greater than 90 % efficiency
13 December, 2006
Vishay Intertechnology, Inc. released a new 500-kHz half-bridge dc-to-dc controller and synchronous rectifier driver that work together as a chipset to enable more efficient 25-W to 300-W telecom and computer power supplies.
Vishay's new 0.5-A MOSFET, IGBT driver closely matches 1.0-V maximum output voltage
12 December, 2006
Vishay Intertechnology is adding to its optoelectronics product portfolio with a 0.5-A MOSFET/IGBT driver that has a 1.0-V maximum low-level output voltage, eliminating the need for negative gate drive. An isolated solution with a high-speed optocoupler and IGBT/MOSFET driver in one package, the new VO3150 is ideally suited for directly driving IGBTs with ratings up to 1200 V and 50 A in industrial and consumer applications.
New inductors offer saturation currents up to 9.5 A & typical DCR values down to 7.6 mΩ in 2525 footprint
11 December, 2006
Vishay Intertechnology, Inc. announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering a very low 3.0-mm height profile and inductance values from 22
Vishay announces industry
10 December, 2006
Vishay Intertechnology, Inc. announced the industry
Vishay broadens portfolio of ambient light sensors with surface-mount 0805
10 December, 2006
Vishay Intertechnology, Inc. is adding to its optoelectronics portfolio with three new ambient light sensors that allow automatic control of liquid crystal display brightness and enable a number of advanced automotive driver comfort and safety features.
Vishay announces the release of new TH3 molded solid tantalum chip capacitors
09 December, 2006
Vishay Intertechnology, Inc. announced the release of new TH3 molded solid tantalum chip capacitors, designed to provide high reliability with high-temperature capabilities of 150
New kit integrates I2C and RS-232 interface with Windows-based software
08 December, 2006
In a move to reduce time to market for designers using its ambient light sensors, Vishay Intertechnology, Inc. announced a new light sensing development kit that allows development engineers to measure and display ambient illumination, tune the sensor, define their software program responses, and complete a hardware layout. The development kit supports Vishay's recently introduced ambient light sensor portfolio.
A new surface-mount Power Metal Strip resistor that is industry
07 December, 2006
Vishay Intertechnology, Inc. announced a new surface-mount Power Metal Strip resistor that is the industry
New high-temperature 1-W surface-mount Power Metal Strip resistor
06 December, 2006
Vishay Intertechnology, Inc. announced a new high-temperature 1-W surface-mount Power Metal Strip resistor that is the industry's first current sensing resistor in the 2512 case size to operate in a temperature range of
Vishay announce the release of new TANTAMOUNT Hi-Rel COTS T95 series solid tantalum chip capacitors
05 December, 2006
Vishay Intertechnology, Inc. announced the release of new TANTAMOUNT Hi-Rel COTS T95 series solid tantalum chip capacitors, designed to provide high-reliability screening and surge current testing options.
Vishay's new solid-state relay provides on-resistance of 5 Ohms in 4.7-mm by 7.4-mm package
04 December, 2006
Vishay Intertechnology, Inc. announced theVO1400AEFTR, a miniature 1-Form-A solid-state relay with low on-resistance of 5 ohms, trigger current of 1 mA, and load voltage of 60 V. Using an optical medium, the new device provides clean, bounce-free switching for indoor security, instrumentation, and industrial control systems.
New 2.4-GHz ISM transceiver module family that supports seven operating channels, each spread
03 December, 2006
Vishay Intertechnology Inc. announced a new 2.4-GHz ISM transceiver module family that supports seven operating channels, each spread with a unique direct sequence spread spectrum code. These modules offer a unique combination of features, such as high data rate, wide operating voltage, wide temperature range, and much more.
Vishay announces introduction of Vishay Systems G4 family of advanced process control instruments
02 December, 2006
Vishay Intertechnology, Inc. announces the introduction of the Vishay Systems G4 family of advanced process control instruments. Applications include process weighing and control, force measurement, web tension measurement and control, automation, force vector calculations, high dynamic force measurement, and high-speed batching/blending systems.
Vishay
01 December, 2006
Vishay Intertechnology, Inc. announced the release of the new TNPW e3 series of high-stability thin-film flat chip resistors in seven industry-standard sizes.
Vishay releases a trio of precision low-voltage monolithic CMOS analog switching ICs
30 November, 2006
Vishay Intertechnology, Inc. released a trio of precision low-voltage monolithic CMOS analog switching ICs that combine a wide voltage range, low leakage, and tight on-resistance matching for precision signal switching and routing.
Vishay Intertechnology Inc. announced the release of two new boost converter ICs
29 November, 2006
Vishay Intertechnology, Inc. announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V.
Vishay's new RoHS-compliant SMD aluminum capacitors enable operation up to 125
28 November, 2006
Vishay Intertechnology, Inc. announced the release of a new surface-mount aluminum capacitor series designed to provide capacitance values up to 680
Vishay's new 8-A, 600-V ultrafast rectifiers offer 25-ns reverse recovery and 150-ns forward recovery
27 November, 2006
Vishay Intertechnology, Inc. is adding to its portfolio of high-voltage Ultrafast rectifiers with a pair of new devices that reduce power losses in the switchmode power supplies for consumer, computer, and industrial products with their extremely fast reverse and forward recovery times and low forward voltage drop.
New Vishay siliconix boost converter ICs
04 November, 2006
Vishay Intertechnology, Inc. today announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V.
Vishay expands IHLP family of low-profile, high-current inductors with new devices
20 August, 2006
Vishay Intertechnology, Inc. today announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering inductance values from 10
Vishay's T83 solid tantalum chip capacitors offer high reliability with standard to B level weibull grading
19 August, 2006
Vishay Intertechnology, Inc. today announced the release of new Hi-Rel COTS T83 series solid tantalum chip capacitors, designed to provide high reliability and a choice of standard and low-ESR values in five different case sizes.
Two-chip solution saves on components for servers and telecom power supplies
18 August, 2006
The new Si9122A half-bridge controller and SiP11203/11204 secondary synchronous rectifier driver offer greater than 90 % dc to dc conversion efficiency, even for output voltages below 3.3 V, in power supply modules and network cards for fixed telecom systems, central office switching equipment, distributed power systems, intermediate bus converters, and brick converters.
Vishay's new 0.5-A MOSFET, IGBT driver closely matches 1.0-V maximum output voltage
17 August, 2006
Vishay Intertechnology is adding to its optoelectronics product portfolio with a 0.5-A MOSFET/IGBT driver that has a 1.0-V maximum low-level output voltage, eliminating the need for negative gate drive. An isolated solution with a high-speed optocoupler and IGBT/MOSFET driver in one package, the new VO3150 is ideally suited for directly driving IGBTs with ratings up to 1200 V and 50 A in industrial and consumer applications.
New inductors offer saturation currents up to 9.5 A and typical DCR values down to 7.6 mΩ in 2525 footprint
16 August, 2006
With the lowest DCR/
Vishay broadens portfolio of ambient light sensors with surface-mount 0805 and leaded 3-mm and 5-mm devices
15 August, 2006
Vishay Intertechnology, Inc. is adding to its optoelectronics portfolio with three new ambient light sensors that allow automatic control of liquid crystal display brightness and enable a number of advanced automotive driver comfort and safety features
New LED display designed as a solid-state alternative to popular plasma displays
14 August, 2006
Vishay Intertechnology, Inc today announced the industry
Vishay's new aluminum capacitors achieve maximum impedance at 100 kHz
25 June, 2006
Vishay Intertechnology, Inc. today announced a new family of surface-mount aluminum capacitors with very low impedance, high ripple current, long useful life, and solderability under lead (Pb)-free conditions. The new 150 CRZ capacitors are also compliant with the European Union's Restriction of Hazardous Substances.
Vishay announces the release of a new surface-mount aluminum capacitor series
25 June, 2006
Vishay Intertechnology, Inc today announced the release of a new surface-mount aluminum capacitor series designed to provide capacitance values up to 680
A new family of surface-mount aluminum capacitors with very low impedance for Vishay
24 June, 2006
Vishay Intertechnology, Inc. today announced a new family of surface-mount aluminum capacitors with very low impedance, high ripple current, long useful life, and solderability under lead (Pb)-free conditions. The new 150 CRZ capacitors are also compliant with the European Union's Restriction of Hazardous Substances.
Vishay's new phototriacs with static dV/dt of 5 kV/
24 June, 2006
Vishay Intertechnology, Inc is adding to its industry-leading phototriac portfolio with 12 new devices offering a static dV/dt of 5 kV/
Vishay releases three dual single-pole/double-throw monolithic CMOS analog switches
23 June, 2006
Vishay Intertechnology, Inc. today released three dual single-pole/double-throw monolithic CMOS analog switches that combine a low voltage operating range and low on-resistance ratings in a small package size for signal routing applications in portable and battery-powered end products.
New Vishay 093 PMG-SI aluminum capacitors achieve 2,000 hours rated useful lifetime
23 June, 2006
Vishay Intertechnology today announced the release of a new series of aluminum electrolytic capacitors with a capacitance range from 68
First | Prev  | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8  | Next  | Last
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo