Morgan Construction Company |
| |
Rolling Mill Division
15 Belmont Street
Worcester
MA 01605-2665
USA
[t] +1 508 755 6111
[f] +1 508 755 6140
|
|
| |
Morgan Construction Company specialises in rolling mill technology. Founded in 1888, by Charles Hill Morgan in Worcester, Massachusetts, Morgan continues to grow and expand with new steel technologies. Morgan has designed and installed more than 450 rod, bar, and billet mills in more than 40 countries around the world. |
| |
|
Morgan Construction Company has received a contract from Nucor Corporation to upgrade the company's single-strand rod outlet at the Norfolk, Nebraska steel mill. |
04 June 2006 |
| |
|
Morgan Construction Company has received a contract from Cascade Steel Rolling Mills of McMinnville, Oregon to upgrade the company's single-strand rod outlet. Neil Gow, Sales Manager of Morgan's rolling mill division, noted the order is for high-speed pinch roll and laying head assemblies. |
03 June 2006 |
| |
|
The MORGOIL Bearing Division of Morgan Construction Company has received a contract to manufacture MORGOIL Bearings for Anshan Iron & Steel Group Corporation, Liaoning Province, the People's Republic of China. |
02 June 2006 |
| |
|
The MORGOIL Bearing Division of Morgan Construction Company has received a contract from SIEMENS-VAI (Voest-Alpine Industrieanlagenbau GmbH & Co), a mill builder located in Linz, Austria, for the design and manufacture of MORGOIL Bearings. |
01 June 2006 |
| |
|
Morgan Construction Company has received a contract from Siderúrgica Lázaro Cárdenas Las Truchas, S.A. de C.V in Lázaro Cárdenas, Mexico, for new shears for the existing 2-strand bar mill. In addition to the shears Morgan will also supply the electrical hardware and automation changes required. |
31 May 2006 |
| |
|
The MORGOIL Bearing Division of Morgan Construction Company will hold a MORGOIL Symposium in China this September that will feature bearing seminars in both Chinese and English. The event will take place in Shanghai, China. |
30 May 2006 |
| |
|
The MORGOIL Bearing Division of Morgan Construction Company will hold a MORGOIL Symposium in China this September that will feature bearing seminars in both Chinese and English. The event will take place in Shanghai, China. |
25 July 2005 |
| |
|
Morgan Construction Company has received a contract from Siderúrgica Lázaro Cárdenas, Las Truchas, S.A. de C.V in Lázaro Cárdenas, Mexico, for a new compactor and coil handling system. |
19 July 2005 |
| |
|
Morgan Construction Company has received an order from the Corus Group for an upgrade to the company's four-strand mill in Scunthorpe, United Kingdom |
13 July 2005 |
| |
|
Morgan Construction Company has received an order from the Corus Group for an upgrade to the company's four-strand mill in Scunthorpe, United Kingdom. |
13 July 2005 |
| |
|
Morgan Construction Company has received two contracts from Acindar Industria Argentina de Aceros S.A., Argentina, for the design, manufacturer and installation of new equipment to upgrade Acindar's two-strand rod mill. |
30 May 2005 |
| |
|
Morgan Construction Company has received three contracts from Siderúrgica Añón, SA of La Coruña in Spain, to design, build and install several modifications to its combination single-stand bar and rod mill. |
17 January 2005 |
| |
|
Morgan do Brasil, a subsidiary of Morgan Construction Company, has successfully passed its registration audit and has been certified for ISO 9001: 2000.
|
21 December 2004 |
| |
|
Morgan Construction Company has received two contracts from Acindar Industria Argentina de Aceros S.A., Argentina, for the design, manufacturer and installation of new equipment to upgrade Acindar’s two-strand rod mill.
|
13 December 2004 |
| |
|
Morgan Construction Company has received a contract from BES Brandenburger Elektrostahlwerke GmbH, of Brandenburg, Germany, for an upgrade of its four-strand rod mill.
|
06 December 2004 |
| |
|
Morgan Construction Company has received a contract from Belgo Mineira for the design and installation of a new C-Hook system at Belgo’s TL 01 mill in Monlevade, Brazil.
|
29 November 2004 |
| |
|
Morgan Construction Company has received a contract from QASCO-Dubai for an upgrade of its single-strand rod mill in Dubai, United Arab Emirates.
|
22 November 2004 |
| |
|
Morgan Construction Company has received a contract from QASCO-Dubai for an upgrade of its single-strand rod mill in Dubai, United Arab Emirates.
|
15 November 2004 |
| |
|
Morgan Construction Co., has announced the availability of a new software product named XpertManager™ that will be offered to both ferrous and non-ferrous rolling mills worldwide.
|
09 November 2004 |
| |
|
Morgan Construction Company has received a contract from Belgo Mineira for a speed-up of its two-strand TL0l steel mill in João Monlevade, Brasil.
|
02 November 2004 |
| |
|
Morgan Construction Company has signed a contract with Aceralia Redondos Zumarraga, of Zumarraga, Spain, for an upgrade to the company's two-strand rod mill.
|
26 October 2004 |
| |
|
The MORGOIL® Bearing Division of Morgan Construction Company has received a contract from Angang New Steel, of Anshan, Liaoning Province, the People’s Republic of China, for its Hydraulic Automatic Gauge Control (HAGC) Cylinders.
|
21 September 2004 |
| |
|
Eric Liu has been named president and CEO of Morgan Shanghai, the China subsidiary of Morgan Construction Company. He is succeeding Michael Wong who is taking the position of vice-chairman of Morgan’s Asian operations.
|
20 July 2004 |
| |
|
The board of directors of Morgan Construction Company, at its recent annual meeting, elected two vice presidents, while naming a third vice president as a board member. |
07 June 2004 |
| |
|
Morgan Construction Company has received an order from China Steel Corporation of Kaohsiung, Taiwan, for an upgrade to its two-strand rod mill.
|
10 May 2004 |
| |
|
Morgan do Brasil, of São Paulo, Brazil, a subsidiary of Morgan Construction Company, has received an order from Siderúrgica Del Orinoco (SIDOR) C.A., of Bolivar, Venezuela, for the design, manufacturer and installation of two Reform Station Modifications with incorporation of Morgan's patented Ring Distributor System.
|
28 April 2004 |
| |
|
The MORGOIL® Bearing division of Morgan Construction Company has received a contract from China First Heavy Industries Co., Ltd., a mill builder located in Dalian City, the Peoples Republic of China.
|
20 April 2004 |
| |
|
The MORGOIL® Bearing Division of Morgan Construction Company has received a contract from Eregli Demir ve Celik Fabrikalari, T.A.S. (ERDEMIR), of Eregli, Turkey, to upgrade the chocks and bearings on their Mesta plate mill.
|
23 March 2004 |
| |
|
The MORGOIL® Bearing Division of Morgan Construction Company has received a contract from China Erzhong, a mill builder located in Deyang, Sichuan Province, the People’s Republic of China for the design and manufacture of MORGOIL Bearings.
|
17 March 2004 |
| |
|
Morgan Construction Company has received a major contract from Chicago Heights Steel, of Chicago Heights, IL, for the modernization of its bar mill. This is the second contract that Morgan has received within the past three months for upgrading American bar mills.
|
09 March 2004 |
| |
|
Morgan Construction Company has received an order for one of its new compactors from Voest-Alpine Draht GmbH, of Donawitz, Austria.
|
24 February 2004 |
| |
|
The MORGOIL® Bearing Division of Morgan Construction Company has received a contract from Dalian Heavy Industries, a mill builder located in Dalian City, the People’s Republic of China.
|
17 February 2004 |
| |
|
Morgan Construction Company has received a contract from Tata Iron and Steel Company, Ltd., (Tata Steel) in Jamshedpur, India, for a new single-strand bar mill.
|
10 February 2004 |
| |
|
Wuhan Iron and Steel, located in Wuhan, Hubei Province, the People’s Republic of China, has ordered a major upgrade to its existing two-strand rod mill from Morgan Construction Company.
|
04 February 2004 |
| |
|
Morgan Construction Company has received a contract from Groupe Sonasid, headquartered in Casablanca, Morocco, to upgrade the company's double-strand rod mill.
|
07 January 2004 |
| |
|
The MORGOIL® Bearing Division of Morgan Construction Company, has received a contract from Jinan Iron and Steel Co., Ltd., in Jinan, Shandong Province, the People’s Republic of China, to manufacture seven sets of its bearings. This is the division's third major contract received during the past two months. |
18 November 2003 |
| |
|
Morgan Construction Company set a new safety record for the company when on August 17, it passed two-years without experiencing a lost-time accident.
|
01 November 2003 |
| |
|
The MORGOIL Bearing Division of Morgan Construction Company, has received a contract to manufacture 17 sets of MORGOIL Bearings for Angang New Steel, of Anshan, in Liaoning Province, the People’s Republic of China.
|
23 September 2003 |
| |
|
Morgan do Brasil, of São Paulo, Brazil, a subsidiary of Morgan Construction Company, has completed the commissioning of a major upgrade of the coil handling area of a two-strand rod mill at Belgo Mineira TL01, in João Monlevade, MG, Brazil.
|
15 September 2003 |
| |
|
Morgan Construction Co. will display some of its latest rolling mill and MORGOIL® Bearing equipment at the upcoming 2003 Association of Iron and Steel Engineers (AISE) Exposition to be held in Pittsburgh from September 28-October 1.
|
22 August 2003 |
| |
|
Gabriel Royo, has rejoined Morgan Construction Company as vice president and general manager of the MORGOIL® Bearing Division and World Wide Rolling Mill Spares, Installations & Services.
|
18 August 2003 |
| |
|
Morgan Construction Company has received a contract from Siderúrgica Añón, SA of La Coruña, Spain, to design and build a new single-strand rod outlet.
|
14 August 2003 |
| |
|
Morgan Construction Company, which recently installed an upgrade to the single-strand rod outlet at Gerdau Ameristeel's Jacksonville Steel Mill Division in Baldwin, Fla., has successfully completed its commissioning.
|
22 July 2003 |
| |
|
Morgan Construction Company has received an order from Zhangjiagang Shatai Steel Company, Ltd., in Jiangsu Province, the People’s Republic of China, for a new bar-in-coil outlet.
|
17 June 2003 |
| |
|
Morgan Construction Company, through its subsidiary, Morgan-Europe, of Sheffield, England, has received a contract from von Moos Stahl A.G., Emmenbrücke, Switzerland, to upgrade the Swiss firm's combination mill. |
29 April 2003 |
| |
|
Morgan Construction Company has received a contract from Shandon Shiheng Special Steel Co., Ltd. in Tai'an, Shandong Province, People's Republic of China, to provide the rod outlet to the company's single-strand rod mill. The contract calls for both design and manufacturer of the mill.
|
14 April 2003 |
| |
|
Morgan Construction Company, here, and Badische Stahl-Engineering GmbH, (BSE) of Germany, have formed an alliance under which both companies will work together to market “Multi-Slit Technology.” |
21 January 2003 |
| |
|
Morgan Construction Company of Worcester, has successfully commissioned the upgrade it recently installed to the existing single-strand rod and bar mill for Cascade Steel Co., of McMinnville, Oregon.
|
17 December 2002 |
| |
|
Morgan Construction Company's manufacturing plant in Shanghai, has recently shipped 12 No-Housing stands to Zhang Jia Gang Shatai Steel Company, Ltd., in Jiangsu Province, the People's Republic of China. |
05 November 2002 |
| |
|
Paul S. Morgan, chairman emeritus of Morgan Construction Company, received the 'Tadeusz Sendzimir Memorial Medal' from the Association of Iron and Steel Engineers (AISE). |
28 October 2002 |
| |
|
Morgan Construction Company, of Worcester, Mass., has received a milestone order from Echeng Iron & Steel Co., Ltd., in Echeng, Hubei Province, of the People's Republic of China for a bar reducing/sizing (RSM) mill. |
21 October 2002 |
| |
|
Morgan Construction Company has commissioned a new high-speed wire rod mill at Anyang Iron & Steel Company in People's Republic of China.
|
10 September 2002 |
| |
|
Sterling Steel Company, LLC, which is in the process of upgrading a recently closed mill, has signed a contract with Morgan Construction Company for the design, manufacture and installation of Morgan's patented Stelmor® controlled cooling conveyor in their single-strand rod mill. |
16 August 2002 |
| |
|
Morgan Construction Company, of Worcester, has received an order from Shanxi Haixin International Iron and Steel Company Ltd., a new high-speed single-strand rod mill to be built in Shanxi Province, the People's Republic of China. This will be that company's first rod mill from Morgan. |
01 July 2002 |
| |
|
Morgan Construction Company has successfully commissioned the upgraded single-strand rod mill at Gerdau Riograndense, in Sapucaia do Sul, RS, Brazil. This mill was originally built in 1980. |
01 May 2002 |
| |
|
Morgan Construction Company has received an order to design, build and install an aluminum rod mill for Guizhou Aluminum Corporation of Guiyang, in Guizhou Province, People's Republic of China. This will be that company's first Morgan mill. |
02 April 2002 |
| |
|
Morgan Construction Company, through its subsidiary, Morgan-Europe of Sheffield, England, has received a contract to upgrade Fundia Nedstaal B. V.'s mill in Alblasserdam, The Netherlands. |
04 March 2002 |
| |
|
Zhang Jia Gang Shatai Steel Company, Ltd., in Jiangsu Province, the People's Republic of China, has placed an order for 12 No-Housing Stands with Morgan Construction Company, of Worcester, Mass. |
28 February 2002 |
| |
|
Pohang Iron and Steel Company (POSCO), of Pohang, Korea, has successfully started up its recently installed upgraded #3 mill.
|
04 February 2002 |
| |
|
Morgan Construction Company, through its subsidiary Morgan-Europe of Sheffield, England, has successfully completed the installation and commissioning of the first phase of the modernization to the one-strand wire rod outlet at the Byelorussian Steelworks (BMZ), in Zhlobin, Republic of Belarus. |
19 November 2001 |
| |
|
Belgo Mineira Steel Company, of Monlevade, Brazil, has ordered two Horizontal Coil Compactors from Morgan Construction Company. |
29 October 2001 |
| |
|
Angang New Steel Co. has ordered three sets of MORGOIL Bearings from the MORGOIL Bearing Division of Morgan Construction Company. |
09 October 2001 |
| |
|
Zhangjiagang Shatai Steel Company, Ltd., in Jiangsu Province, the People's Republic of China, has ordered a high-speed rolling mill for its steel manufacturing facility from Morgan Construction Company. |
17 September 2001 |
| |
|
Zhangjiagang Sheen-Faith Steel Corporation Ltd., in Zangjiagang, Jiangsu Province, the People's Republic of China, has ordered two Morgan Compactors, bringing to three the company has ordered from Morgan. |
22 August 2001 |
| |
|
Morgan Construction Company has successfully commissioned its high-speed rod mill at Hangzhou Iron & Steel Group Co., Hangzhou, People's Republic of China.
|
24 July 2001 |
| |
|
Morgan Construction Company's newly developed High-Speed Shear has been successfully commissioned at Connecticut Steel Corporation (CSC), of Wallingford, Conn. The equipment was installed several months ago on the steel company's one-strand mill. |
30 May 2001 |
| |
|
When Belgo Mineira's steel plant in Monlevade, Brazil, received The Bekaert Group's Vincent Gaeremynck Award earlier this year, it marked the eighth time since the Award was first presented in 1988 that the recipient produces rod steel using Morgan technology. |
26 April 2001 |
| |
|
The in-line, high-pressure water-cooling boxes incorporating Morgan Construction Company's Enhanced Temperature Control System (METCS) have been commissioned at SIDENOR's Vitoria (Spain) Rod Mill. |
20 February 2001 |
| |
|
Morgan Construction Company has received a contract to modernize the Byelorussian Steel Works (BMZ) mill in Zhlobin, Republic of Belarus. |
15 January 2001 |
| |
|
Jiuquan Iron and Steel (Group) Co., Ltd., of Jiuquan, People's Republic of China, has signed a contract with Morgan Construction Company for a major upgrade to its existing rod mill. |
08 January 2001 |
| |
|
Pohang Iron and Steel Company (POSCO), of Pohang, Korea, has purchased a major upgrade for its #3 mill from Morgan Construction Company.
|
06 October 2000 |
| |
|
Global Steel and Wire, S.A., of Santander, Spain, have recently completed the latest development phase of their rod mill.
|
20 September 2000 |
| |
|
Morgan Construction Company has received confirmation of its patent for an Automatic Roll Group Alignment (ARGA) System from the United States, Japan and Korea. |
07 June 2000 |
| |
|
Morgan Construction Company has completed a major modernization project at Ivaco Rolling Mills in L'Orignal, Ontario, Canada. The final phase of this three-phase project was recently completed with the successful installation and startup of Morgan’s patented Reducing/Sizing Mill. |
24 May 2000 |
| |
|
Morgan Construction Company has received word from GST Steel Company in Kansas City, Mo., that its two-strand rod mill this March achieved a record monthly production of 72,482 tons. |
25 April 2000 |
| |
|
Morgan Construction Co., has received its second major contract within the past few months from North Star Steel, of Minneapolis, Minn. to upgrade North Star's Beaumont, Texas facility. |
08 March 2000 |
| |
|
Morgan Construction Company has successfully completed the installation of a mill upgrade at Saarstahl AG, in Neunkirchen, Germany. |
29 February 2000 |
| |
|
Morgan Construction Company, through its Morgan do Brasil division, Sao Paulo, Brazil, has received a contract from Siderugica Barra Mansa S.A. for a major upgrade to its existing single-strand mill in its headquarters plant in Barra Mansa. |
28 January 2000 |
| |
|
Morgan Construction Company, through its Morgan do Brasil division, Sao Paulo, Brazil, has received a contract from Siderugica Barra Mansa S.A. for a major upgrade to its existing single-strand mill in its headquarters plant in Barra Mansa. |
28 January 2000 |
| |
|
Morgan Construction Company has received a major contract from Anyang Iron & Steel Company, of Anyang City in Henan Province, in the People's Republic of China, to design and build that company's first high-speed wire rod mill. |
18 January 2000 |
| |
|
Morgan Construction Company has completed the modernization of Sicartsa's existing four-strand rod mill located at its Lazaro Cardenas, Mexico, headquarters.
|
12 January 2000 |
| |
|
Morgan Construction Company has received a major contract from Hangzhou Iron & Steel Group Co., Hangzhou, People's Republic of China, to design and build that company's first high-speed wire rod mill. |
06 January 2000 |
| |
| |
