Vishay Electronic |
| |
Geheimrat-Rosenthal-Str. 100
Selb
D-95100
Germany
[t] +49 9287 71 0
[f] +49 9287 70 435
|
|
| |
Vishay Transducers is a division of Vishay Measurements Group. Vishay Measurements Group develops, manufactures, and markets a broad range of sensors for a wide variety of test and measurement applications. These include electrical resistance strain gages for both stress analysis testing and transducer manufacturing applications, load cells for approved weighing applications, force transducers, instrumentation, hybrid strain gage assemblies and bonding services.Vishay, a Fortune 1,000 Company listed on the NYSE, is one of the world's largest manufacturers of discrete semiconductors (diodes, rectifiers, transistors, optoelectronics, and selected ICs) and passive electronic components (resistors, capacitors, inductors, and transducers). The Company's components can be found in products manufactured in a very broad range of industries worldwide. Vishay is headquartered in Malvern, Pennsylvania, and has operations in 17 countries employing over 26,000 people. |
| |
|
Vishay Intertechnology, Inc. released two new synchronous buck step-down controller ICs designed to operate with external MOSFETs, and a minimum of external components, in dc to dc converter circuits that require output currents upwards of 10 A. |
08 April 2007 |
| |
|
Vishay Intertechnology, Inc. announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V. |
07 April 2007 |
| |
|
Vishay Intertechnology, Inc. announced the CDHV, a surface-mount chip resistor divider with a small size profile that achieves outstanding ratio stability under high voltages. The new resistor divider is designed for use in high-voltage power supplies, power switching equipment, and inverter controls. |
06 April 2007 |
| |
|
Vishay Intertechnology, Inc. launched a new miniature package type for its Trench MOS Barrier Schottky and planar Schottky rectifiers that enables higher-current-density power supply designs with its compact dimensions and ability to handle up to 100 V and 12 A. |
06 March 2007 |
| |
|
Vishay Intertechnology, Inc. announced that it is making all of its FunctionPAK® dc-to-dc converters and current control modules available in a new surface-mount adaptor board configuration to support engineering prototype assembly. |
05 March 2007 |
| |
|
Vishay Intertechnology, Inc. announced the release of eight new series of infrared receiver modules in a new Minicast package type, featuring high immunity against EMI and a high-precision band filter. |
04 March 2007 |
| |
|
Vishay Intertechnology, Inc. released two new families of p-channel load switches optimized for high-side operation in 1.5 V to 5 V load-switching applications. The SiP4280A and SiP4282 devices will be used to turn on and turn off the power for the display, speakerphone, memory cards, and other such functions in portable electronic systems such as cell phones, digital still cameras, hot-swap power supplies, notebook computers, and PDAs. |
03 March 2007 |
| |
|
Vishay Intertechnology, Inc. announced the addition of four new modules featuring superior performance for pulse-distance coding to its TSOP1xxxx series of IR receivers. |
02 March 2007 |
| |
|
Vishay Intertechnology, Inc. announced the release of eight new series of infrared receiver modules in a new Minicast package type, featuring high immunity against EMI and a high-precision band filter. |
01 March 2007 |
| |
|
Vishay Intertechnology is broadening its optoelectronics portfolio with a new device integrating a Remote Control receiver and an IrDA transceiver into a single, 3-lens, surface-mount package for the PC market. |
28 February 2007 |
| |
|
Vishay Intertechnology, Inc. announced that it is now providing detailed thermal characteristics for newly released optocouplers and solid-state relays that have total power dissipation of 200 mW and higher. Vishay is the first optocoupler and SSR manufacturer in the industry to provide thermal models, which significantly reduce design time for customers. |
27 February 2007 |
| |
|
A web-based tool that gives designers a detailed simulation of how Vishay Siliconix MOSFETs will perform thermally and be affected by adjacent components in a wide range of applications is now available on the web site of Vishay Intertechnology, Inc. |
26 February 2007 |
| |
|
Vishay Intertechnology, Inc. released a family of new dual SPDT and dual SPST analog switches designed for audio, video, and data stream applications. Offering low on-resistance and high bandwidth in the space-saving MICRO FOOT package through the full voltage range of 1.8 V to 5.5 V, the six new switches are aimed at end products including cell phones, PDAs, media players, and notebook computers. |
19 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced that it is shipping the first two power MOSFETs to be offered in its innovative PolarPAK package, which uses double-sided cooling to reducing thermal resistance, package resistance, and package inductance for a more efficient, faster switching power MOSFET. |
18 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering inductance values from 10 µH down to 0.56 µH. |
17 December 2006 |
| |
|
KEC and Vishay Intertechnology, Inc. announce that they have signed an agreement under which Vishay will license its Vishay Siliconix TrenchFET power MOSFET technology to KEC. |
16 December 2006 |
| |
|
Vishay Intertechnology, Inc. is pleased to announce that it has been selected to receive Delphi Corporation's 2006 Pinnacle Award. The award from Delphi, a world leader in mobile electronics and transportation components and systems technology, recognizes suppliers primarily for their outstanding quality performance or quality improvement. Vishay is one of the world's largest manufacturers of discrete semiconductors and passive electronic components. |
15 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of new Hi-Rel COTS T83 series solid tantalum chip capacitors, designed to provide high reliability and a choice of standard and low-ESR values in five different case sizes. |
14 December 2006 |
| |
|
Vishay Intertechnology, Inc. released a new 500-kHz half-bridge dc-to-dc controller and synchronous rectifier driver that work together as a chipset to enable more efficient 25-W to 300-W telecom and computer power supplies. |
13 December 2006 |
| |
|
Vishay Intertechnology is adding to its optoelectronics product portfolio with a 0.5-A MOSFET/IGBT driver that has a 1.0-V maximum low-level output voltage, eliminating the need for negative gate drive. An isolated solution with a high-speed optocoupler and IGBT/MOSFET driver in one package, the new VO3150 is ideally suited for directly driving IGBTs with ratings up to 1200 V and 50 A in industrial and consumer applications. |
12 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering a very low 3.0-mm height profile and inductance values from 22 µH down to 1.0 µH. |
11 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced the industry’s first 128 x 32 LED graphics display with drive electronics and +5 Volt HC CMOS-level video interface. Designed as a drop-in compatible replacement for the popular APD-128G032 plasma display module, the LED-128G032 is designed to offer high brightness and superior viewing characteristics in a slim package. |
10 December 2006 |
| |
|
Vishay Intertechnology, Inc. is adding to its optoelectronics portfolio with three new ambient light sensors that allow automatic control of liquid crystal display brightness and enable a number of advanced automotive driver comfort and safety features. |
10 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of new TH3 molded solid tantalum chip capacitors, designed to provide high reliability with high-temperature capabilities of 150°C with 50 % voltage derating. |
09 December 2006 |
| |
|
In a move to reduce time to market for designers using its ambient light sensors, Vishay Intertechnology, Inc. announced a new light sensing development kit that allows development engineers to measure and display ambient illumination, tune the sensor, define their software program responses, and complete a hardware layout. The development kit supports Vishay's recently introduced ambient light sensor portfolio. |
08 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced a new surface-mount Power Metal Strip resistor that is the industry’s first 1-W current sensing resistor in the very small 1206 package size. The WSLP1206 resistor features a very low 2-mΩ to 50-mΩ resistance value range, and high-temperature performance up to 170 /°C. |
07 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced a new high-temperature 1-W surface-mount Power Metal Strip resistor that is the industry's first current sensing resistor in the 2512 case size to operate in a temperature range of –65 °C to +275 °C. The WSLT2512 resistor features a very low 10-mΩ to 500-mΩ resistance value range, a tight tolerance down to ±0.5 %, and low TCR values down to ±75 ppm/°C. |
06 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of new TANTAMOUNT Hi-Rel COTS T95 series solid tantalum chip capacitors, designed to provide high-reliability screening and surge current testing options. |
05 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced theVO1400AEFTR, a miniature 1-Form-A solid-state relay with low on-resistance of 5 ohms, trigger current of 1 mA, and load voltage of 60 V. Using an optical medium, the new device provides clean, bounce-free switching for indoor security, instrumentation, and industrial control systems. |
04 December 2006 |
| |
|
Vishay Intertechnology Inc. announced a new 2.4-GHz ISM transceiver module family that supports seven operating channels, each spread with a unique direct sequence spread spectrum code. These modules offer a unique combination of features, such as high data rate, wide operating voltage, wide temperature range, and much more. |
03 December 2006 |
| |
|
Vishay Intertechnology, Inc. announces the introduction of the Vishay Systems G4 family of advanced process control instruments. Applications include process weighing and control, force measurement, web tension measurement and control, automation, force vector calculations, high dynamic force measurement, and high-speed batching/blending systems. |
02 December 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of the new TNPW e3 series of high-stability thin-film flat chip resistors in seven industry-standard sizes. |
01 December 2006 |
| |
|
Vishay Intertechnology, Inc. released a trio of precision low-voltage monolithic CMOS analog switching ICs that combine a wide voltage range, low leakage, and tight on-resistance matching for precision signal switching and routing. |
30 November 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V. |
29 November 2006 |
| |
|
Vishay Intertechnology, Inc. announced the release of a new surface-mount aluminum capacitor series designed to provide capacitance values up to 680 µF and reliability at high temperatures up to 125 °C. The new 140 CRH RoHS-compliant SMD aluminum capacitor is both lead (Pb)-free and solderable under lead (Pb)-free soldering conditions. |
28 November 2006 |
| |
|
Vishay Intertechnology, Inc. is adding to its portfolio of high-voltage Ultrafast rectifiers with a pair of new devices that reduce power losses in the switchmode power supplies for consumer, computer, and industrial products with their extremely fast reverse and forward recovery times and low forward voltage drop. |
27 November 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of two new boost converter ICs designed to maximize the power available from single- or dual-cell NiMH or alkaline battery packs by providing 85 % dc-to-dc conversion efficiency and operating from battery voltages as low as 0.85 V. |
04 November 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering inductance values from 10 µH down to 0.56 µH. |
20 August 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of new Hi-Rel COTS T83 series solid tantalum chip capacitors, designed to provide high reliability and a choice of standard and low-ESR values in five different case sizes. |
19 August 2006 |
| |
|
The new Si9122A half-bridge controller and SiP11203/11204 secondary synchronous rectifier driver offer greater than 90 % dc to dc conversion efficiency, even for output voltages below 3.3 V, in power supply modules and network cards for fixed telecom systems, central office switching equipment, distributed power systems, intermediate bus converters, and brick converters. |
18 August 2006 |
| |
|
Vishay Intertechnology is adding to its optoelectronics product portfolio with a 0.5-A MOSFET/IGBT driver that has a 1.0-V maximum low-level output voltage, eliminating the need for negative gate drive. An isolated solution with a high-speed optocoupler and IGBT/MOSFET driver in one package, the new VO3150 is ideally suited for directly driving IGBTs with ratings up to 1200 V and 50 A in industrial and consumer applications. |
17 August 2006 |
| |
|
With the lowest DCR/µH for their respective package sizes, the new IHLP inductors serve as high-performing, space- and power-saving solutions for voltage regulator module and dc-to-dc converter applications in end products including next-generation mobile devices; notebooks, desktop computers, servers, graphic cards, portable gaming devices, personal navigation systems, personal multimedia devices, and automotive systems; low-profile, high-current power supplies and point of load converters; distributed power systems; and field-programmable gate arrays. |
16 August 2006 |
| |
|
Vishay Intertechnology, Inc. is adding to its optoelectronics portfolio with three new ambient light sensors that allow automatic control of liquid crystal display brightness and enable a number of advanced automotive driver comfort and safety features |
15 August 2006 |
| |
|
Vishay Intertechnology, Inc today announced the industry’s first 128 x 32 LED graphics display with drive electronics and +5 Volt HC CMOS-level video interface. Designed as a drop-in compatible replacement for the popular APD-128G032 plasma display module, the LED-128G032 is designed to offer high brightness and superior viewing characteristics in a slim package. |
14 August 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new family of surface-mount aluminum capacitors with very low impedance, high ripple current, long useful life, and solderability under lead (Pb)-free conditions. The new 150 CRZ capacitors are also compliant with the European Union's Restriction of Hazardous Substances. |
25 June 2006 |
| |
|
Vishay Intertechnology, Inc today announced the release of a new surface-mount aluminum capacitor series designed to provide capacitance values up to 680 µF and reliability at high temperatures up to 125 °C. The new 140 CRH RoHS-compliant SMD aluminum capacitor is both lead (Pb)-free and solderable under lead (Pb)-free soldering conditions. |
25 June 2006 |
| |
|
Vishay Intertechnology, Inc is adding to its industry-leading phototriac portfolio with 12 new devices offering a static dV/dt of 5 kV/µs, a five-fold improvement over the next best devices from other suppliers. These new phototriacs give customers a selection of 58 base phototriac part numbers (excluding electrical and lead form options) that is broad enough to meet any application requirement. |
24 June 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new family of surface-mount aluminum capacitors with very low impedance, high ripple current, long useful life, and solderability under lead (Pb)-free conditions. The new 150 CRZ capacitors are also compliant with the European Union's Restriction of Hazardous Substances. |
24 June 2006 |
| |
|
Vishay Intertechnology, Inc. today released three dual single-pole/double-throw monolithic CMOS analog switches that combine a low voltage operating range and low on-resistance ratings in a small package size for signal routing applications in portable and battery-powered end products. |
23 June 2006 |
| |
|
Vishay Intertechnology today announced the release of a new series of aluminum electrolytic capacitors with a capacitance range from 68 µF to 820 µF for mains-side filter-buffer applications. The capacitors have ± 20 % tolerance and a 2,000 hours useful lifetime rating at +85 °C. |
23 June 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new solid state relay, dual photovoltaic MOSFET driver that offers the highest open-circuit voltage and short-circuit current combination available on the market. When coupled with Vishay Siliconix MOSFETs, the new VO1263AB provides longer product life, higher reliability, and faster switching compared to equivalent electrical mechanical relay designs. |
22 June 2006 |
| |
|
Giving designers a new source of small-footprint capacitors for mobile electronic systems, Vishay Intertechnology, Inc. today announced the release of a family of leadframeless tantalum capacitors with face-down terminations. |
22 June 2006 |
| |
|
Vishay Intertechnology, Inc today released a new Trench MOS Barrier Schottky rectifier with the lowest forward voltage ever achieved for this device type. |
21 June 2006 |
| |
|
Vishay Intertechnology, Inc today released two new high-speed converter solutions that integrate the control MOSFET, the synchronous MOSFET, and driver circuit in a low-profile, high-performance PowerPAK MLF 10x10 package. The new products simplify the single and multiphase dc-to-dc design process and provide 3 % higher efficiency compared with discrete solutions. |
21 June 2006 |
| |
|
Vishay Intertechnology, Inc today announced the CDHV, a surface-mount chip resistor divider with a small size profile that achieves outstanding ratio stability under high voltages. The new resistor divider is designed for use in high-voltage power supplies, power switching equipment, and inverter controls. |
20 June 2006 |
| |
|
Vishay Intertechnology is adding to its optoelectronics product portfolio with two new infrared transceivers that support the IrDA high-speed IrSimpleShot protocol for beaming digital pictures directly from camera phones to TVs, printers, and other enabled camera phones. |
20 June 2006 |
| |
|
Vishay Intertechnology, Inc. is adding to its portfolio of high-voltage Ultrafast rectifiers with a pair of new devices that reduce power losses in the switchmode power supplies for consumer, computer, and industrial products with their extremely fast reverse and forward recovery times and low forward voltage drop. |
19 June 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of six new TELUX¬ series clear, non-diffused red LEDs featuring one of the world's brightest AllnGaP on GaAs technologies and constructed with a special oval lens that reduces the number and cost of LEDs required in automotive and other lighting applications. |
19 June 2006 |
| |
|
A new series of junction FETs that eliminate the problem of latch-up in amplifier designs was released today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. A perennial challenge for analog designers, latch-up occurs when several JFETs on the same substrate form a parasitic junction that can turn on unexpectedly, causing excessive current to flow. The complete new family of 'no latch' monolithic dual JFETs, which includes more than 20 devices, overcomes this problem by providing an exposed substrate connection via an external pin, allowing designers to bias the substrate with a positive potential to prevent a latch-up condition. |
14 May 2006 |
| |
|
Four new high-intensity 30° LED devices designed for high-end applications requiring supreme luminous intensity were launched today by Vishay Intertechnology, Inc. Built on the ultra-bright AllnGaP and InGaN technologies, devices in the new Vishay Semiconductors TLCx52xx series are clear, non-diffused, 5-mm LEDs featuring an untinted plastic case and a lens and viewing angle optimized to provide the greatest light output and visibility. |
13 May 2006 |
| |
|
Intended for switching linear power supplies, power amplifiers, and measurement instrumentation, the compact CSM2512 and CSM3637 resistors from Vishay Foil Resistors feature an all-welded construction made up of a Bulk Metal resistive element with 60/40 tin/lead-plated copper terminations. Vishay's Bulk Metal technology enables the new resistors to provide superior TCR performance over larger, competing devices, as well as excellent long-term stability and ultra-precision tolerances down to ±0.1%. |
12 May 2006 |
| |
|
This latest addition to the patented Vishay Dale IHLP family of compact, surface-mount inductors is designed to provide a higher-performing, power- and space-saving solution for dc-to-dc converter and energy storage applications in end products including computers, servers, telecom, and automotive electronics. Devices in the IHLP-5050FD-01 series are offered in a surface-mount package measuring just 0.508 in. (12.9 mm) by 0.520 in. (13.2 mm), with a height profile of 0.256 in. (6.5 mm). The inductor 's high saturation current ranges from 30 A to 120 A, and its maximum DCR values range from 0.50 m Ω to 11.2 m Ω. |
11 May 2006 |
| |
|
Devices in the new Vishay Semiconductors TLMx2100 and TLMx2300 MiniLED families are available in all typical wavelengths from 465 nm to 630 nm, providing exceptionally bright illumination at 10 mA and 20 mA, respectively. TLMx2100 color options include super red (7.5 mcd), orange (7.5 mcd), yellow (7.5 mcd), green (10.0 mcd), pure green (2.2 mcd), and blue (7.0 mcd). For applications requiring maximum intensity, TLMx2300 devices built on AllnGaP on GaAs technology are offered in ultra-bright red (80 mcd), orange (120 mcd), and yellow (120 mcd) versions. |
10 May 2006 |
| |
|
With very low TCR values of just 15 ppm/°C and high power ratings of 0.25 W, 0.5 W, and 1.0 W, respectively, in compact 1506, 2010, and 2512 case sizes, the new, patent-pending, extended-range flip chip WSL resistors from Vishay maintain the superior electrical characteristics of the Power Metal Strip construction while occupying a smaller mounting area on the printed circuit board. The new devices also provide good overload capability using the PC board as a cooling device and long-term stability through a broad range of environmental conditions, thereby enabling design of smaller, lighter, and longer-lasting end products. |
09 May 2006 |
| |
|
A new series of heavy-duty, metallized-film power capacitors with current ratings as high as 150 A and very low self-inductance was announced today by Vishay Intertechnology, Inc. The new Vishay ESTA HDMKP series devices serve as low-cost capacitor solutions for dc and ac filtering and for dc linking in uninterruptible power supplies and in power converters for traction and industrial drives. |
08 May 2006 |
| |
|
A new family of small computer systems interface bus terminators that provides flexible solutions for all SCSI bus operational modes from SCSI 1 to SPI 4 (Ultra 320) was announced today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
07 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it has extended its IHLP family of low-profile, high-current inductors with two new devices offering inductance ranges of 0.1 µH to 2.2 µH (IHLP 2525EZ 05) and 3.3 µH to 10 µH (IHLP 2525EZ 01). |
07 May 2006 |
| |
|
A new reflective optical sensor capable of detecting objects at operating distances of up to 40 mm was announced today by Vishay Intertechnology, Inc. The surface-mount TCND5000 reflective sensor, which includes an IR emitter and PIN photodiode in a single package, is well suited for use in object presence sensors, touch sensors, and proximity sensors in a broad range of consumer, industrial, and automotive applications. |
06 May 2006 |
| |
|
Vishay Intertechnology, Inc. today launched a new package type for its rectifier and transient voltage suppressor products that delivers the same current and power ratings as the SMA package in a 44% smaller footprint. Setting a new standard for rectifier current density, devices in the new SMP package handle up to 2 A while delivering industry-record levels of thermal resistance. |
06 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the VSMP1206 high-precision, surface-mount, Bulk Metal Z-foil resistor, the industry's first such device to combine a high power rating of 300 mW, load life stability of 0.01%, and a low nominal TCR of ±0.5 ppm/°C in an industry-standard, surface-mount package. |
05 May 2006 |
| |
|
The new FunctionPAK FX5545G206 delivers output power up to 15 W at a maximum current of 2.5 A. Intended for point of load applications in intermediate bus architectures, the FX5545G206 will be used where a single low-level voltage bus needs to be boosted up to the voltage needed to drive FPGAs, microprocessors, DSPs, DDR SDRAMs, and other IC devices. |
05 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced three new series of axial-leaded wirewound / metal oxide resistors competitively priced for high-volume applications. The new devices, for power ratings from 1 W up to 20 W, are intended for applications that require capacitive discharge, short term pulsing, high power dissipation, voltage division, and dc-to-dc conversion in end products including white goods, home entertainment systems, power tools, and power supplies. |
04 May 2006 |
| |
|
Vishay Intertechnology, Inc. today extended the IMC family of wirewound, surface-mount inductors from Vishay Dale with the release of two new devices packaged in compact 0402 and 0603 case sizes and designed to provide space savings in communications applications with limited board space. |
04 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a fully integrated universal constant-current control one- and two-channel LED driver that is the smallest complete such solution to include all necessary components in a single package. |
03 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new series of 10 MBd optocouplers in an SOIC-8 packaged rated for operating temperatures up to +100 °C. |
03 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the addition of two miniature, low-voltage, surface-mount oscillators, rated for 1.8-V and 2.5-V input voltages, to the company's XOSM family of clock oscillators. |
02 May 2006 |
| |
|
Vishay Intertechnology, Inc.has announced a new range of components that integrate two positive temperature coefficient thermistors into a single surface-mount package. The Vishay BCcomponents 2322 673 xxxxx twin vertical SMD PTC devices are constructed from a ceramic disc, reflow soldered to a lead-frame. This physical construction results in a flat pick-up area of 30 mm2, which facilitates automated assembly. |
02 May 2006 |
| |
|
A new series of low-profile surface-mount inductors in the 2525 package size has been announced by Vishay Intertechnology, Inc. Devices in the IHLP-2525AH-01 series are specified for saturation currents up to 40 A and offer typical DCR values as low as 3.0 mΩ in a package measuring 1.8 mm high. |
01 May 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the addition of a new low-profile, high-current inductor series to its line of high-performing, space- and power-saving inductor solutions for voltage regulator module and dc-to-dc converter applications. Like Vishay Dale IHLP inductors, the new IHLM-2525CZ-01 series features the lowest DCR/µH for its package size - 0.255 in. by 0.270 in. [6.47 mm by 6.86 mm] with a low 0.118 in. [3.0 mm] profile, and excellent operation over a frequency range up to 5 MHz. A molded construction also gives IHLM devices a higher dielectric withstanding voltage that allows for enhanced protection against electrical shock. |
01 May 2006 |
| |
|
A family of new,150-V and 200 V p channel power MOSFETs that offers space-saving solutions for active clamp configurations were released today by Siliconix incorporated an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
30 April 2006 |
| |
|
Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc., today announced that the two companies have concluded an agreement whereby ST will license from Siliconix a new power MOSFET packaging technology that provides superior thermal performance via top and bottom heat dissipation paths in systems using forced air cooling. |
30 April 2006 |
| |
|
Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc, today announced the industry's first n-channel MOSFETs that combine a high 3.4-V threshold voltage with on-resistance as low as 2.7 milliohms. |
30 April 2006 |
| |
|
Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc., today announced the industry's first n-channel MOSFETs that combine a high 3.4-V threshold voltage with on-resistance as low as 2.7 milliohms. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the availability of Vishay Nobel GLT web tension load cells. The high-reliability load cells measure low resultant tension forces with small wrap angles. Designed for use in applications such as winders, unwinders, rewinders, coaters, laminators, and printing presses, they eliminate drift and frequent recalibration problems often encountered with conventional half-bridge semiconductor-type load cells. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that its entire line of standard optocouplers is completely lead (Pb)-free. Vishay has shipped more than a billion lead (Pb)-free optocouplers for use in a wide range of industrial, consumer, and telecommunications applications. The Company was the first manufacturer to offer lead (Pb)-free optocouplers, which it introduced in 1997 in response to concerns about lead (Pb) in the environment. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the availability of the Vishay Nobel RCS-microPOS, a true digital servo force and positioning control reeling system that is used to adjust the primary arms' relief cylinders to the correct linear nip force on the winder of paper machines. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of two new thin film chip inductors in compact 0402 and 0603 case sizes that provide high Q values up to 49 at specified frequencies from 100 MHz to 1700 MHz. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the availability of the Vishay Nobel RFS 3 system. The RFS 3 system provides mill operators with continuous monitoring and display of roll separating force and differential balance forces. In addition, it provides local and remote indications of 'Metal in Mill' and 'Mill Overload.' Signal outputs representing the rolling mill forces on each side of the mill that are being measured by the system are supplied for the operation of remote indicators, or for use by external control systems. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the availability of Vishay Nobel P9420-800 series pressure transmitters. A further development in the range of hammer-lug union fittings for the offshore oil industry, the P9420-800 series pressure transmitters are an extension of the P9420 series with fused ceramic sensors that provide high shock and vibration immunity. |
30 April 2006 |
| |
|
To meet the increasing demand for aluminum indium gallium phosphor-based ultra-miniature SMD LEDs, Vishay Intertechnology, Inc. today announced the release of the exceptionally bright TLMx100x LEDs in red, soft orange, and yellow. |
30 April 2006 |
| |
|
Vishay Intertechnology, Inc. has extended its family of thick film power resistors with the introduction of 30-W, 50-W and 100-W devices in industry-standard TO220 and TO247 packages. The resistors use a ceramic package design (with no metal tab) for direct-mounting on heatsinks, and feature an exceptionally low inductance of less than 0.1 µH, suiting them for use in power conversion and control applications in a wide variety of industries. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it has extended the IHLP family of low-profile, high-current inductors with a new device that offers the lowest DCR/µH available in a compact 0.402-in. by 0.452 in. [10.2 mm by 11.5 mm] package with a low 0.157 in. [4.0 mm] height profile. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the new Vishay Micro-Measurements Model A2 Signal Conditioner and Amplifier System for strain gages, strain-gage-based transducers, thermocouples, and various other sensors with high-level signals |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the release of Vishay Transducers GLT Web Tension Systems. Designed to meet the needs of paper, film, foil converting, and printing equipment manufacturers, the new, low-tension GLT Web Tension Systems precisely measure winding, rewinding, slitting, coating, laminating, and printing zone to ensure premium process performance. |
29 April 2006 |
| |
|
Five new p-channel load switches, the industry's first such devices designed to offer low on-resistance at a 1.5-V gate drive, were released today by Vishay Intertechnology, Inc. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of four high-performance PIN photodiodes that offer best-in-class sensitivity in a new miniature surface-mount package measuring 4.24 mm by 5.0 mm with a 1.12-mm height profile. |
29 April 2006 |
| |
|
Two IrDA serial infrared transceivers with the smallest available package dimensions on the market were announced today by Vishay Intertechnology, Inc. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. today released two new white LED drivers that deliver high efficiency up to 80% during operation in compact handheld and battery-operated electronics. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. today released a family of new analog switches designed for direct battery operation in portable applications. Offering low on-resistance and low-level logic control through the full voltage range of 1.6 V to 4.3 V, the new switches are aimed at end products including cell phones, set-top boxes, PDAs, and media players. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of two new Vishay Semiconductors low-capacitance ESD protection diode arrays that extend the company's line of ultra-small LLP-packaged products optimized for data-line protection in compact portable electronics. |
29 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the introduction of the Vishay Nobel WST 3 load cell output converter. The high-performance WST 3, with Profibus DP communication and DIN-rail mounting, provides a convenient weighing solution for food processing and chemicals applications. The WST 3 integrates easily into an instrument control panel to provide local weight or force indications, with set-up and calibration via the front panel. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the introduction of the new Vishay Nobel TAD 3 batch-capable weighing controller. The TAD 3, which can store up to 30 recipes with 34 lines, adds extra processing power to provide faster response and extra conversion modes. It also enables developers to leverage a large library of over 250 special programs, which allow all TAD-series devices to be quickly programmed for virtually any industrial application. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. announces the introduction of the Vishay Nobel AST3IS transmitter. The AST3IS is a high-performance isolation amplifier designed for use with strain-gage transducers in hazardous areas without the need for Zener barriers. This eases earthing design and installation, and reduces costs and maintenance for process weighing systems in applications such as chemical and pharmaceutical manufacturing. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it is making all of its FunctionPAK dc-to-dc converters and current control modules available in a new surface-mount adaptor board configuration to support engineering prototype assembly. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced two new 150-mA low-noise low-dropout regulators with the highest available current density in the small five-pin SC-70 package. Their extremely small 2-mm by 2-mm footprint makes them well suited for use in battery-powered equipment such as cell phones, PDAs, pagers, digital cameras, MP3 players, cable and DSL modems, and other noise-sensitive electronics. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new surface-mount, wirewound, shielded inductor that provides high reliability and enables easy surface-mounting in close proximity to other components on the assembly board. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new protected high-side load switch that can operate under a supply voltage range of 2.4 V to 5.5 V and handle a continuous output current of 1 A, with the threshold current set by a single external resistor. |
28 April 2006 |
| |
|
In a breakthrough for wet tantalum capacitor technology, Vishay Intertechnology, Inc. today announced additions to the SuperTan family of wet tantalum capacitors that include a device with the highest capacitance value yet achieved in the standard T4 package. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of three new devices in the MFU series of thin film flat chip fuses that offer quick-acting fuse characteristics, with rated current values up to 5.0 A, as well as stability verified in accordance with UL 248 14 and IEC 60127 4. |
28 April 2006 |
| |
|
Vishay Intertechnology, Inc. today introduced the industry's smallest FIR (fast infrared) IrDA transceivers. With a height of only 1.9 mm and footprint dimensions of 6.0 mm by 3.0 mm, the new TFBS6711 and TFBS6712 are the thinnest, smallest FIR transceivers on the market. |
28 April 2006 |
| |
|
Low ESR values allow for more efficient filtering in dc-to-dc conversion applications, while the devices' ability to handle high currents is key in microprocessor bulk energy storage applications. The new Vishay Sprague TR3 capacitors are intended for applications in telecom, automotive, computer, industrial, commercial, medical, and avionics end systems. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it has extended the IHLP family of low-profile, high-current inductors with a new device that offers the lowest DCR/µH available in a 0.402-in. by 0.402-in. [10.2-mm by 10.2-mm] package with a low 0.157-in. [4.0-mm] height profile. |
27 April 2006 |
| |
|
Available in the compact 0603 package size, the new Vishay Dale WSL0603 resistor serves in all types of current-sensing, voltage division, and pulse applications. It is intended for power management in cell phones and pagers; electronic automotive systems including engine controls, audio electronics, and climate controls; and disc drive motor control and dc to dc converters in computers. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc. today launched a new series of organic polymer, surface-mount tantalum capacitors featuring Vishay's innovative conductive polymer cathode technology, which delivers low equivalent series resistance values across a broad capacitance range extending from 47 µF to 2200 µF with a standard capacitance tolerance of ±20%. |
27 April 2006 |
| |
|
The phototriacs consist of a GaAs infrared LED that is optically coupled to a monolithic photosensitive zero crossing triac detector chip. A low-input trigger current facilitates an easy interface with microcontrollers and digital logic. The VO3063 requires a maximum trigger current of 5 mA to latch output, while the VO3062 requires a maximum trigger current of 10 mA. The devices are available in 6-pin DIP, 400-mil DIP, and SMD packages. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc today launched new low-profile, high-capacitance solid tantalum chip capacitors, packaged in a compact P case size, designed to provide superior reliability while making room for greater functionality in compact electronics. |
27 April 2006 |
| |
|
Providing an alternative solution to the use of multiple low-value capacitors to achieve sufficient capacitance in low-profile applications, Vishay Intertechnology, Inc. today announced the release of the industry's first tantalum capacitors to provide 3300 µF in a package with a height of only 2.5 mm. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc. today released a family of new dual SPDT and dual SPST analog switches designed for audio, video, and data stream applications. Offering low on-resistance and high bandwidth in the space-saving MICRO FOOT package through the full voltage range of 1.8 V to 5.5 V, the six new switches are aimed at end products including cell phones, PDAs, media players, and notebook computers. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of new surface-mount chip resistor attenuators capable of replacing three or more discrete components, in turn reducing board space requirements and simplifying manufacture of smaller, lighter electronic systems. Intended for RF signal attenuation applications in telecom and mobile wireless products, the new Vishay Dale CZA04S and CZA06S reduce component count while improving performance with tolerance matching and temperature tracking superior to that provided by individual components. |
27 April 2006 |
| |
|
The new Vishay Dale WSL3921 and WSL5931 are ideal for all types of current-sensing, voltage division, and pulse applications including switching and linear power supplies, instruments, and power amplifiers in automotive electronic controls; battery-charging systems and motor controls in consumer products; and motor controls in industrial systems. |
27 April 2006 |
| |
|
Vishay Intertechnology, Inc today announced a 2-W, surface-mount Power Metal Strip resistor with a low resistance value range of 10 milliohms to 100 milliohms and tight 1% tolerance. The new Vishay Dale WSL2816 is optimized for current sensing, voltage division, and pulse applications such as motor controls and dc-to-dc converters in automotive, consumer, and industrial systems. |
26 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it is shipping the first two power MOSFETs to be offered in its innovative PolarPAK package, which uses double-sided cooling to reducing thermal resistance, package resistance, and package inductance for a more efficient, faster switching power MOSFET. |
26 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a complete Vishay RFWaves reference design for a USB-based wireless headset using a fully digital 2.4-GHz wireless link. Target applications for the system include VoIP, PC-based cordless telephony, and PC-based 'intelligent' toys. |
26 April 2006 |
| |
|
The new MOSFET drivers operate with external n-channel MOSFETs. They are designed to provide gate drive voltages of 8 V or 12 V, operate at switching frequencies up to 1 MHz, and function in 5-V to 48-V systems, including power converters and industrial and computing equipment. The high-side driver of each device has an internal bootstrap diode to reduce external component count. |
26 April 2006 |
| |
|
Vishay Intertechnology, Inc. today released two new synchronous buck step-down controller ICs designed to operate with external MOSFETs, and a minimum of external components, in dc to dc converter circuits that require output currents upwards of 10 A. |
26 April 2006 |
| |
|
Vishay Intertechnology, Inc. has extended its family of Vishay Beyschlag thin film flat chip resistors by introducing devices in 0402, 0603, 0805 and 1206 packages with resistance value up to 221 kΩ, 511 kΩ, 1.5 MΩ, and 2.0 MΩ respectively. The MCS 0402, MCT 0603, MCU 0805, and MCA 1206 resistors are aimed at applications that require extended value ranges with high stability and accuracy. |
26 April 2006 |
| |
|
The new Vishay Beyschlag ACAS 0612 series resistor arrays are available in both precision and professional versions. They have absolute TCR down to ± 25 ppm/ K, and tracking TCR as low as 10 ppm/ K. The devices are offered in industry-standard resistance values from 100 ohms to 221 kilohms in numerous configurations including four equal, four different, or two equal value pairs. Matched values for applications such as precision voltage dividers are also available from stock. |
26 April 2006 |
| |
|
Seventeen new power MOSFETs that offer exceptionally low on-resistance values down to 3.7 milliohms in the compact PowerPAK 1212 8 package were released today by Vishay Intertechnology, Inc. These TrenchFET Gen II devices deliver significant space savings with dimensions of just 3.3 mm by 3.3 mm by 1 mm, just 1/3 the size of the SO 8 package, as well as low thermal resistance of 2 degrees Celsius per Watt for an eightfold improvement when compared with SO 8 devices. |
26 April 2006 |
| |
|
The new ZC VO4157 and VO4158 series phototriacs consist of a GaAs infrared LED that is optically coupled to a photosensitive ZC TRIAC detector chip. This design type helps to reduce EMI noise harmonics while featuring lower peak operating currents, making it well suited for noise sensitive circuits. Devices in the VO4257 and VO4258 series of NZC phototriacs, on the other hand, have the advantage of being able to trigger any time during the ac phase cycle and turn off at the next zero crossing. This makes the NZC devices an ideal choice for many phase modulation applications. |
26 April 2006 |
| |
|
Vishay Intertechnology, Inc. today released two new high-speed converter solutions that integrate the control MOSFET, the synchronous MOSFET, and driver circuit in a low-profile, high-performance PowerPAK MLF 10x10 package. The new products simplify the single and multiphase dc-to-dc design process and provide 3 % higher efficiency compared with discrete solutions. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the VFCP series of ultra-high-precision, surface-mount Bulk Metal Z Foil resistors in a flip chip configuration that provides an outstanding power to size ratio. The five new VFCP resistors are the industry's first in a flip chip design to combine high power ratings up to 750 mW at 70 °C with long-term stability down to ±0.005 %, very low typical TCR of ±0.2 ppm/°C, excellent PCR of ±5 ppm typical at rated power, and tight tolerance of ±0.01 %. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today released a trio of precision low-voltage monolithic CMOS analog switching ICs that combine a wide voltage range, low leakage, and tight on-resistance matching for precision signal switching and routing. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the CDHV, a surface-mount chip resistor divider with a small size profile that achieves outstanding ratio stability under high voltages. The new resistor divider is designed for use in high-voltage power supplies, power switching equipment, and inverter controls. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the VSMP series of ultra-high-precision, surface-mount Bulk Metal° Z Foil resistors, the industry's first devices to provide high power ratings up to 750 mW at 70 °C with long-term stability down to ±0.005%, very low typical TCR of less than ±0.2 ppm/°C, excellent PCR of ±5 ppm at rated power, and tight tolerance of ±0.01%. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the new VSM series of Bulk Metal foil ultra-high-precision wrap-around, surface-mount chip resistors, the first devices to combine a low and predictable TCR value of ±2 ppm/°C (-55 °C to +125 °C), load life stability of ±0.01 %, and tight tolerance of ±0.01 %. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a complete Vishay RFWaves reference design for a wireless monitoring system using a fully digital 2.4-GHz wireless link. Target applications for the system include home intercoms, video baby monitors, home video monitoring systems, and business video surveillance. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the industry's first Schottky barrier rectifiers based on Trench MOS technology. Useful as a rectification circuit or OR-ing diode in redundant switchmode power supplies, or to replace synchronous rectification solutions, the five new TMBS devices feature the lowest forward voltage drop among Schottky rectifiers for their package types. |
25 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the availability of high-intensity SMD LEDs capable of undergoing lead (Pb)-free reflow soldering that can serve as direct replacements for devices in Vishay's TLM series. Devices in the new VLM series are intended for use in applications including backlighting in automotive dashboards, car radios, and switches; indicators and backlighting in telecommunications systems, audio and video equipment, and office equipment; and in flat backlighting for LCDs, switches, and symbols. |
22 April 2006 |
| |
|
Vishay Intertechnology, Inc. is adding to its industry-leading phototriac portfolio with 12 new devices offering a static dV/dt of 5 kV/µs, a five-fold improvement over the next best devices from other suppliers. These new phototriacs give customers a selection of 58 base phototriac part numbers (excluding electrical and lead form options) that is broad enough to meet any application requirement. |
22 April 2006 |
| |
|
The new VLMW2100 SMD MiniLED is available in a low-profile 2.3-mm by 1.3-mm by 1.4-mm package and is luminous intensity categorized, featuring the same classification and designation scheme as Osram. The VLMW2100 offers a 60° angle of half-intensity, luminous intensity of ≥56 mcd, and a luminous intensity ratio of ≤2.0 per packaging unit (or ≤1.6 on request) to provide bright, even lighting. Low power consumption adds to efficiency, prolonging battery life and/or reducing operational costs. |
22 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of six new TELUX¬ series clear, non-diffused red LEDs featuring one of the world's brightest AllnGaP on GaAs technologies and constructed with a special oval lens that reduces the number and cost of LEDs required in automotive and other lighting applications. |
22 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced the release of eight new EMI filter arrays with integrated ESD protection diodes. Offered in ultra-small leadless, plastic packages, the new devices provide both EMI filtering and ESD protection for data lines in space-critical mobile applications. |
22 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new solid state relay, dual photovoltaic MOSFET driver that offers the highest open-circuit voltage and short-circuit current combination available on the market. When coupled with Vishay Siliconix MOSFETs, the new VO1263AB provides longer product life, higher reliability, and faster switching compared to equivalent electrical mechanical relay designs. |
22 April 2006 |
| |
|
Vishay Intertechnology, Inc. today announced a new 5-watt Power Metal Strip resistor that is the industry's first such device to offer 5-watt capability in the small 2818 package size. The new surface-mount Power Metal Strip resistor, in a package measuring 0.280 in. by 0.180 in. by 0.032 in. [7.1 mm by 4.6 mm by 0.813 mm], also features very low resistance values ranging from 1 milliohm to 100 milliohms. |
22 April 2006 |
| |
|
Vishay Intertechnology today announced the release of a new series of aluminum electrolytic capacitors with a capacitance range from 68 µF to 820 µF for mains-side filter-buffer applications. The capacitors have ± 20 % tolerance and a 2,000 hours useful lifetime rating at +85 °C. |
22 April 2006 |
| |
|
Siliconix Incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc., today announced four new high-speed, half-bridge, n-channel MOSFET driver ICs designed for use in high-frequency, high-current, single- and multiphase dc-to-dc switching power supplies, including one driver with a brake for brushless motor control applications. |
31 January 2006 |
| |
|
Vishay Intertechnology, Inc. has announced that it has extended its family of Vishay Beyschlag thin film flat chip resistors with the introduction of high-stability, precision devices in miniature 0402 packages. Available with values from 100 Ω to 221 kΩ, the new devices offer the industry's widest resistance range for CECC-certified precision resistors at this size. |
31 January 2006 |
| |
|
Vishay Intertechnology, Inc. today announced that it has introduced two new series of flat chip resistor arrays that integrate four thin film resistors into a single 0612 surface-mount package. The Vishay Beyschlag ACAC 0612 precision series and ACAC 0612 professional series resistor arrays are ideal for applications that demand high component densities and accurate and stable resistor performance. |
18 February 2005 |
| |
|
A new miniature reflective optical sensor capable of operating in bright sunlight was announced today by Vishay Intertechnology, Inc. The TCND3000 surface-mount optical sensor integrates touch and proximity functions and operates in conjunction with an integrated circuit (E909.01) built on ELMOS Semiconductor's High Ambient Light Independent Optical System technology to provide reliable operation in very bright sunlight up to 200 kLux. |
11 February 2005 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new fully integrated dc-to-dc buck converter that delivers power density of more than 570 W per cubic inch in a 20-port, surface-mount BGA package with an area of 0.58 in. by 0.48 in. [14.7 mm by 12.2 mm] and a low maximum height profile of 0.126 in. [3.2 mm]. |
21 January 2005 |
| |
|
Vishay Intertechnology, Inc. has announced the release of a new 9-mm multi-ganged potentiometer with an ultra-compact module, a miniature 0.375 in. by 0.75 in. [9.52 mm by 11.35 mm], and availability in variable standard and custom models to enable highly adaptive designs. |
19 January 2005 |
| |
|
Vishay Intertechnology, through its Vishay Nobel office in Sweden, has been awarded a contract to design and supply to customers special crane load cells and associated instruments for iron and steel manufacturing operations in China. |
07 January 2005 |
| |
|
Vishay Intertechnology, Inc. announces that Vishay Transducers has expanded its 600 series of Vishay Tedea-Huntleigh S-type load cells to include nickel-coated alloy steel and stainless steel variants. Models 615 and 616 are suitable for harsh environments and frequent wash-down, and are sealed to IP66. For even higher resistance to ingress, Models 619 and 620 are rated to IP67 and IP68 respectively. |
17 November 2004 |
| |
|
Vishay Intertechnology, Inc. today announced three new dual high-voltage Schottky rectifiers offering a 200-V reverse voltage, the highest available voltage for a silicon Schottky rectifier, a 20-A forward current rating, and a high maximum operating junction temperature of 175 °C. |
17 November 2004 |
| |
|
Vishay Intertechnology, Inc. announces that the Vishay Tedea Huntleigh 3520 range of shear beam load cells, part of the Vishay Transducers product portfolio, targets low-profile floor scales, pallet scales, and other trade or industrial process and weighing applications. The 19-mm-high load cells save space and enhance the appearance of end products. Stainless steel construction allows easy cleaning and provides high resistance to corrosion. The units are also fully sealed to meet IP67 standards. |
17 November 2004 |
| |
|
A new family of low-power current-mode controllers that provide increased efficiency and flexibility in cost-sensitive power-supply designs was announced today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
01 November 2004 |
| |
|
Vishay Intertechnology, Inc. today announced that it has extended the XOSM family of surface-mount oscillators with the release of three new low-voltage devices in miniature packages measuring 5.0 mm by 3.2 mm with a 1.3 mm height profile. |
24 September 2004 |
| |
|
A new series of ultra-bright LEDs that give designers a range of six colors in the smallest SMD form factor on the market was announced today by Vishay Intertechnology, Inc. |
24 September 2004 |
| |
|
A new miniature silicon NPN planar phototransistor that gives designers a low-cost way to build backlighted displays that respond automatically to changes in ambient light was announced today by Vishay Intertechnology, Inc. |
24 September 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the new FC series of high-frequency chip resistors, which avoid roll-off even at frequencies over 100 MHz and are available in a range of standard case sizes, including the very compact 0402. |
22 September 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of its E/H MIL-qualified resistor chips in three new sizes, the compact 0402, 0603, and 0502 cases, that give designers greater flexibility in selecting devices for circuits requiring high-performing, high-precision, established-reliability resistors. |
22 September 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new ESD protection diode series optimized for space-critical applications with an ultra-small SOD523 (SC79) package measuring 0.8 mm by 1.6 mm by 0.6 mm. |
17 September 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the industry's first silicon-based surface-mount RF capacitor available in the 0603 case size. Based on a proprietary semiconductor process developed by Vishay, the new capacitor's construction reduces parasitic inductance while bringing self-resonant frequency values to frequencies two to three times higher than conventional RF capacitors. |
17 September 2004 |
| |
|
Vishay Intertechnology, Inc today announced four new additions to the IHLP family of low-profile, surface-mount inductors, which now includes standard inductance values ranging from 0.10 µH to 10.0 µH with typical DCR values as low as 0.47 mΩ, saturation currents from 15.5 A to 120 A, and low losses at frequencies up to 5 MHz. |
10 September 2004 |
| |
|
Two new common-drain, chipscale power MOSFETs that are the industry's first such p-channel and 30-V n-channel devices were announced today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
11 August 2004 |
| |
|
A new family of high-speed infrared emitters offering outstanding levels of radiant power and intensity was announced today by Vishay Intertechnology, Inc. |
06 August 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the addition of a new fully integrated constant current source module to the FunctionPAK family of BGA-packaged dc-to-dc converters. This device is not only the first complete constant current source module to include all necessary components in a single package, but also the industry's smallest complete power LED driver. |
30 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new low-capacitance, bidirectional ESD protection diode array in the SOT 143 SMD package. |
30 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the new MP series of precision thin film resistor divider networks, the first such devices to offer 0.05% resistance ratio tolerance in the ultra-small SC 70 package. |
30 July 2004 |
| |
|
|
30 July 2004 |
| |
|
A dual high-voltage, high-current Schottky rectifier that combines 100-V reverse voltage and 60-A forward current capabilities in the TO 220AB package was announced today by Vishay Intertechnology, Inc. |
23 July 2004 |
| |
|
A new ESD protection array that integrates an EMI filter in a leadless LLP75 package optimized for space-critical applications was announced today by Vishay Intertechnology, Inc. |
23 July 2004 |
| |
|
A new buck-boost regulator that offers designers a simple, low-cost solution for obtaining a stable voltage from the batteries in portable electronic systems was announced today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
21 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of the PR series high-precision thin film resistor arrays in compact 1206, 0805, and 0603 case sizes with a low profile of just 0.4 mm. Vishay is the only manufacturer to offer 0.01% ratio tolerance as a standard product feature in such low-profile arrays. |
16 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new series of thin film high-value precision single in-line resistors with resistance tolerance down to an industry-low ±0.01% over a range of 50 kilohms to 10 megohms. |
16 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced the release of a new series of single-and dual-channel 10-MBd optocouplers, the industry's first such devices rated for 100 °C operation, packaged in a reinforced-insulation construction. |
16 July 2004 |
| |
|
Vishay Intertechnology, Inc.today announced the release of a Schottky diode series packaged in the new ultra-small SOD 523 (SC79) package with dimensions of just 1.2 mm by 0.8 mm and a height profile of 0.6 mm. |
16 July 2004 |
| |
|
Vishay Intertechnology, Inc. today announced four new additions to the IHLP family of power inductors, which now includes the industry's first such devices available with a 5% DCR tolerance for current-sensing applications. These new series have been tested and approved by major IC manufacturers and several other customers. |
09 July 2004 |
| |
|
In a critical advance that will help designers meet the stringent power-density and packaging requirements of new sub-brick power architectures, Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc, today announced the industry's first 200 V power MOSFET available in the compact PowerPAK 1212 8 package. |
07 July 2004 |
| |
|
Two new precision thin film resistor networks announced today by Vishay Intertechnology, Inc. extend the ratio tolerance of the company's MPM and ORN matched-pair and quad resistor networks to a new industry low of just 0.01% in standard molded SOT 23 and 8 pin SOIC packages. |
16 June 2004 |
| |
|
A new chipscale p-channel power MOSFET that offers the industry's lowest on-resistance of any such device with a footprint area under 3 square mm was released today by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc. |
26 May 2004 |
| |
|
