Fastening & Joining |
| |
|
Master Bond EP30FLAO is a two component epoxy resin system for high performance potting, bonding, sealing and coating. It is extremely versatile and can be used in a wide variety of cryogenic applications. |
|
| |
|
Polymer System EP31 is a two part epoxy system which is both an outstanding electrical insulator and features extraordinary adhesion to a wide variety of substrates including many metals, plastics, rubbers, ceramics and glass. |
|
| |
|
Master Bond's Supreme 10AOHT-LO is a NASA low outgassing, cryogenically serviceable, one part epoxy system formulated to stand up to impact, thermal shock, vibration and stress fatigue cracking. |
|
| |
|
Master Bond’s EP17HT-3 one part snap curing epoxy features high temperature resistance and has outstanding electrical properties and chemical resistance. |
|
| |
|
Master Bond’s latest sensor adhesive is designed to withstand long term exposure to hostile environments and chemicals. Its outstanding properties assure long lasting and accurate sensor performance. |
|
| |
|
Master Bond's Supreme 11HT metal adhesive produces bonds with significantly high shear and high peel strengths while offering superior resistance to impact, thermal shock, vibration and fatigue cracking |
|
| |
|
A UV curing conformal coating for electronic circuitry and components is designed to restrain the impact of moisture, dust, chemicals, and temperature extremes. |
|
| |
|
MacGregor Welding Systems has recently installed an automated assembly system used for manufacturing miniature sensor modules for use in analyser equipment. To meet the requirements, a complete turnkey solution was required, capable of handling small components and welding metallic connector ribbons onto small wire pins. |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed a new two component epoxy system for service above 500°F. Called EP125, this compound is designed to withstand exposure to boiling acids, alkalis, salts, fuels and most organic solvents. It offers high bond strength to metallic and nonmetallic surfaces. Typical lap shear strengths are in the order of 2,400-2,500 psi at ambient temperatures. After heat aging for 1,000 hours at 500°F, slightly less than 50% of the original bond strength is retained. Castings exhibit flexural strength as high as 15,000 psi and flexural moduli of more than 500,000 psi. |
|
| |
|
Master Bond Inc., Hackensack, N.J. has recently developed a new medium viscosity, two component epoxy adhesive/sealant, coating and casting compound called EP30HT. It is formulated to cure at room temperature or more rapidly at elevated temperatures. EP30HT features superior dimensional stability, superb optical clarity and high temperature resistance up to 400°F. It conforms to Title 21, U.S. Code of Federal Regulation, FDA Chapter 1, Section 175.105 and 175.300 for food applications. |
|
| |
|
A new CD-Rom that explains how welding efficiency can be maximised using automation, the correct choice of consumables and process optimisation has been released by ESAB. It is available free of charge upon request. |
|
| |
|
ESAB Automation’s COLUMBUS programming system was introduced to make profile cutting processes simple, efficient and cost-effective. Now, individual cutting and marking programs can be created even more quickly and easily with a new COLOMBUS nesting module. |
|
| |
|
While many thousands of companies around the world have already achieved ISO 14001 certification somewhere, ESAB is one of very few global companies to have achieved ISO 14001:2004 certification everywhere. This is believed to be a world first for teh welding and cutting industry. |
|
| |
|
Although there is a considerable array of legislation that governs what can and cannot be done in welding and cutting operations, there are still hazards to be considered relating to arc flash, hot metal, sharp edges, noise, vibration, dust, fumes and awkward postures. |
|
| |
|
The Origo YardFeed 200, a wire feed unit designed to complement the Origo Mig welding power sources for applications that require the operator to work at a distance from the power source, has been launched by ESAB. |
|
| |
|
ESAB is launching three new Tig welding machines, the Origo Tig 3000i models TA23, TA24 and TA24AC/DC. All three have different characteristics and features, making them suitable for a wide range of applications. |
|
| |
|
Construction contractor Aug Prien GmbH & Co KG of Hamburg, Germany, has carried out the welding work for the extension of the Predöhl Quay in the port of Hamburg, being contracted by the city of Hamburg Department for Economy and Labour, Energy and Harbour Construction. |
|
| |
|
The new edition of Svetsaren, ESAB's welding and cutting journal, is now available. Copies of the 52-page full-colour magazine can be requested free of charge, or a PDF version can be downloaded directly from the ESAB website. This issue of Svetsaren has a particular focus on cutting, along with useful material relating to welding products and consumables. |
|
| |
|
ESAB Marathon Pacs with 250 or 475 kg of wire considerably enhance productivity and quality for large-volume users of stainless steel MIG welding wire, and now mid-volume users can enjoy the same advantages without the consumption requirements and capital investment associated with the full-size Marathon Pacs. |
|
| |
|
Afon Engineering of Swansea is a fabricator that specialises in cutting, profiling, rolling, bending and forming plates from materials up to 50mm thick. Typical contracts include pressure vessels, bridgework, offshore skidwork and pipework. |
|
| |
|
Founded over 100 years ago, ESAB is a global supplier of welding and cutting solutions and is Europe’s leading manufacturer of welding and cutting systems as well as arc consumables and personal protection equipment. |
|
| |
|
The TXH range of Tig torches for welders who want the best quality torch with features that truly meet the needs of their applications is being launched by ESAB. Designed with the operator in mind, the torches are easy and comfortable to use. |
|
| |
|
International Metal Service UK's Birmingham facility specialises in the supply of abrasion-resistant and high-yield, high-strength steel plate and profiles. |
|
| |
|
ESAB's all new Caddy Tig HF has a completely new, microprocessor controlled power supply to give advanced welding features that include high frequency or lift arc TIG starts and MMA functions, with up to 150A welding current available. |
|
| |
|
A new four page guide from ESAB, Submerged arc welding with cored wires, contains considerable technical information. |
|
| |
| |
| 1 2 3 4 5 6 7 8 9 10 11 |
| |
