Adhesives |
| |
|
Master Bond EP30FLAO is a two component epoxy resin system for high performance potting, bonding, sealing and coating. It is extremely versatile and can be used in a wide variety of cryogenic applications. |
|
| |
|
Polymer System EP31 is a two part epoxy system which is both an outstanding electrical insulator and features extraordinary adhesion to a wide variety of substrates including many metals, plastics, rubbers, ceramics and glass. |
|
| |
|
Master Bond's Supreme 10AOHT-LO is a NASA low outgassing, cryogenically serviceable, one part epoxy system formulated to stand up to impact, thermal shock, vibration and stress fatigue cracking. |
|
| |
|
Master Bond’s EP17HT-3 one part snap curing epoxy features high temperature resistance and has outstanding electrical properties and chemical resistance. |
|
| |
|
Master Bond’s latest sensor adhesive is designed to withstand long term exposure to hostile environments and chemicals. Its outstanding properties assure long lasting and accurate sensor performance. |
|
| |
|
Master Bond's Supreme 11HT metal adhesive produces bonds with significantly high shear and high peel strengths while offering superior resistance to impact, thermal shock, vibration and fatigue cracking |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed a new two component epoxy system for service above 500°F. Called EP125, this compound is designed to withstand exposure to boiling acids, alkalis, salts, fuels and most organic solvents. It offers high bond strength to metallic and nonmetallic surfaces. Typical lap shear strengths are in the order of 2,400-2,500 psi at ambient temperatures. After heat aging for 1,000 hours at 500°F, slightly less than 50% of the original bond strength is retained. Castings exhibit flexural strength as high as 15,000 psi and flexural moduli of more than 500,000 psi. |
|
| |
|
Master Bond Inc., Hackensack, N.J. has recently developed a new medium viscosity, two component epoxy adhesive/sealant, coating and casting compound called EP30HT. It is formulated to cure at room temperature or more rapidly at elevated temperatures. EP30HT features superior dimensional stability, superb optical clarity and high temperature resistance up to 400°F. It conforms to Title 21, U.S. Code of Federal Regulation, FDA Chapter 1, Section 175.105 and 175.300 for food applications. |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed UV19, a new low viscosity, flexible UV curable composition formulated for fast, high performance laminating, sealing, bonding and casting. It is an optically clear, mobile liquid which cures readily upon exposure to UV light at ambient temperatures to a flexible strong solid with superior mechanical strength properties and excellent adhesion to many different substrates including most plastics and glasses as well as metals. The UV19 system is 100% reactive and does not contain any volatiles. Unlike many other commercially offered UV curing compounds, its cure is not inhibited by air and it exhibits minimal shrinkage when cured. UV19 has excellent resistance to water and many other aggressive chemicals. |
|
| |
|
Master Bond Polymer System Supreme 10HTFL is a new one component flexible high performance epoxy resin based adhesive/sealant with an exceptionally wide service temperature range of -300°F to +300°F. It cures readily to a tough, strong flexible thermoset polymer at temperatures of 250-300°F and above. Unlike other commercially available flexible one part epoxy adhesive sealants, it features extended ambient temperature storage capability and does not require refrigeration for extended storage before use. Master Bond Polymer System Supreme 10HTFL features high physical strength properties and excellent adhesion to a wide range of both metallic and nonmetallic substrates even upon prolonged exposure to hostile environmental conditions. Adhesive and sealing properties to aluminum, steel and other metals, as well as fiber reinforced composites, most plastics, ceramics, glass, wood, etc. are remarkably high. Tensile lap shear strengths of more than 2000 psi and T-peels in excess of 60 pli are obtained for aluminum bonding. |
|
| |
|
Master Bond Inc, Hackensack, N.J. has developed EP62-1MED, a new, two component epoxy adhesive system which features outstanding chemical and temperature resistance. This compound is specifically designed to withstand repeated cycles of steam, ethylene oxide, radiation and chemical sterilization. EP62-1MED cures at moderately elevated temperatures (150°F-200°F) and offers an exceptional long working life at room temperatures. It contains no solvents or volatiles and has a 100 to 10 mix ratio by weight. |
|
| |
|
Master Bond Inc., Hackensack, N.J. is pleased to announce the development of a special dual cure (UV/heat curable) epoxy system called UV15DC80. It is designed for bonding, sealing, coating and potting applications. This compound has a low viscosity, is easy to apply and requires no mixing. Environmentally friendly, it is 100% solid and contains no solvents or volatiles. UV15DC80 is not inhibited by oxygen and has low shrinkage upon cure. |
|
| |
|
A new one component high performance silicone elastomer compound for bonding, sealing and coating has been developed by Master Bond Inc., Hackensack, N.J. called MasterSil 415. This formulation has high transparency and is particularly well suited for optical and display applications. It cures at ambient temperatures to a flexible, rubbery solid when exposed to atmospheric moisture. It is easy to apply and has a paste consistency. It can be applied on vertical surfaces without sagging or running. |
|
| |
|
Master Bond Polymer System Supreme 10HTFL is a new one component flexible high performance epoxy resin based adhesive/sealant with an exceptionally wide service temperature range of -300°F to +300°F. It cures readily to a tough, strong flexible thermoset polymer at temperatures of 250-300°F and above. Unlike other commercially available flexible one part epoxy adhesive sealants, it features extended ambient temperature storage capability and does not require refrigeration for extended storage before use. Master Bond Polymer System Supreme 10HTFL features high physical strength properties and excellent adhesion to a wide range of both metallic and nonmetallic substrates even upon prolonged exposure to hostile environmental conditions. Adhesive and sealing properties to aluminum, steel and other metals, as well as fiber reinforced composites, most plastics, ceramics, glass, wood, etc. are remarkably high. Tensile lap shear strengths of more than 2000 psi and T-peels in excess of 60 pli are obtained for aluminum bonding. |
|
| |
|
Master Bond Polymer System Supreme 10HTFL is a new one component flexible high performance epoxy resin based adhesive/sealant with an exceptionally wide service temperature range of -300°F to +300°F. It cures readily to a tough, strong flexible thermoset polymer at temperatures of 250-300°F and above. Unlike other commercially available flexible one part epoxy adhesive sealants, it features extended ambient temperature storage capability and does not require refrigeration for extended storage before use. Master Bond Polymer System Supreme 10HTFL features high physical strength properties and excellent adhesion to a wide range of both metallic and nonmetallic substrates even upon prolonged exposure to hostile environmental conditions. |
|
| |
|
Master Bond Supreme 3HT-80 is a new one component heat curing epoxy adhesive developed by Master Bond Inc. Supreme 3HT-80 exhibits both high shear and high peel strength. It offers superior resistance to impact, thermal shock, vibration and stress fatigue cracking. This no mix compound has an unlimited working life and cures within 30 minutes at 175°F (80°C). |
|
| |
|
Master Bond Inc., Hackensack, N.J. has developed a new toughened one component heat curing epoxy adhesive/sealant, called EP17. This compound has a service operating range of from -300°F to as high as 600°F. It is formulated to cure at temperatures from 300°F to 350°F for 60-90 minutes. EP17 bonds well to a variety of substrates including metals, glass, ceramics, vulcanized rubbers and many plastics. It has excellent resistance to a wide range of chemicals including fuels, acids, bases, oils and many solvents. |
|
| |
|
Master Bond Supreme 3HT-80 is a new one component heat curing epoxy adhesive developed by Master Bond Inc. Supreme 3HT-80 exhibits both high shear and high peel strength. It offers superior resistance to impact, thermal shock, vibration and stress fatigue cracking. This no mix compound has an unlimited working life and cures within 30 minutes at 175°F (80°C). |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed a new two component, room temperature curing, nickel filled, electrically conductive epoxy adhesive called EP76M. EP76M has a convenient one to one mix ratio by weight or volume. It has a volume resistivity of 5-10 ohm-cm and excellent low outgassing properties. It has a thermal conductivity of 8-9 BTU/in/ft²/hr/°F. EP76M readily develops a tensile shear strength of 2,000 psi when measured and cured at room temperature. |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed a new two component heat cured epoxy adhesive called EP45HT MED. This compound is durable, tough and resistant to exposure to thermal shock and many chemicals. It can withstand long term exposure form -80°F to 500°F and has a glass transition temperature of >185°C. Adhesion to metals, glass, ceramics, wood, vulcanized rubber and many plastics is excellent. The cured system is a superb electrical insulator. |
|
| |
|
Master Bond Inc. of Hackensack, New Jersey has developed a new two component heat cured epoxy adhesive called EP45HT MED. This compound is durable, tough and resistant to exposure to thermal shock and many chemicals. It can withstand long term exposure form -80°F to 500°F and has a glass transition temperature of >185°C. Adhesion to metals, glass, ceramics, wood, vulcanized rubber and many plastics is excellent. The cured system is a superb electrical insulator. |
|
| |
|
EP77M-F is a new, two component, silver filled, electrically conductive epoxy adhesive for high performance bonding. This compound has a low volume resistivity of 10-3 ohm-cm. It will set up in 5-10 minutes at room temperature, even when applied in very small amounts. Full cure usually takes 8-12 hours at room temperatures. Electrical conductivity develops rapidly and is first detectable within 30-60 minutes. |
|
| |
|
Master Bond has developed a new non-halogenated epoxy resin system called EP21HTFR-1 which offers outstanding flame resistance and minimal smoke generation even upon prolonged exposure to open flames. |
|
| |
|
Master Bond Polymer System EP65HT-1 provides the first practical solution for dispensing and applying ultra-fast cure 10:1 mix ratio two component epoxy resin compositions. |
|
| |
|
Master Bond announces the first one part epoxy adhesive system that fully meets USP Class VI requirements and withstands repeated sterilisations. |
|
| |
| |
| 1 2 |
| |
