Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

A new, environmentally-friendly water softening device

Du Pont Engineering Polymers : 18 December, 2006  (New Product)
A new, environmentally-friendly water softening device, which solely relies on water volume for its operation rather than a power supply, is made almost entirely of DuPont Delrin acetal resin. Launched by the Belgian company Delta Water Engineering, the compact yet robust device is available for domestic or commercial use, and requires comparatively little space for installation.
It is currently sold in Belgium and Italy, and will be rolled-out across Europe. Strong and rigid Delrin was selected for the majority of the device’s parts due to the material’s good moisture, heat, and solvent resistance, combined with high tensile and flexural strength plus low elongation.

‘Hard water’ is the common term for water containing high levels of dissolved minerals such as calcium or magnesium carbonates. Upon heating, these minerals form layers of scale in plumbing and appliances, reducing energy efficiency by up to 60 percent. It has lead to both a domestic and commercial demand for water softeners, which are designed to remove hardness. They work either by means of chemical ion-exchange or by subjecting the hard water to a magnetic field. DWE’s new water-softener is of the chemical ion-exchange type, and incorporates the major innovation that it needs no electricity to work.

“As far as we have been able to determine, all currently commercial ion-exchange devices need electric power,” explains Guido Van de Moortele, DWE’s owner. “In conventional softeners, a timer determines when the ion-exchange resin needs to be regenerated. The timer activates one or more electric motors which open or close the valves that permit the regeneration with salt to start and finish. The DWE softener has no timer; the regenerating valves are operated simply by the volume of water passing through it, so our softener needs no electricity and eliminates needless regeneration operations initiated by a time-based system.”

The DWE softener comes in two sizes: each measuring approximately 50 centimetres in height, the domestic unit weighs around 4 kilos; the commercial one is closer to 5 kilos. Its compact proportions mean that less space is required than for other, similar water-softening devices, thus facilitating installation in tight spaces. Over 50 different components of the softener, constituting approximately 95 percent of its overall weight, are made of Delrin.

Indeed DuPont was involved in the DWE softener’s development from the start, providing help in material selection, plus mould-flow studies and mould-fill simulation for parts of the complex valve system. Injection-moulding guidance helped to optimise processing conditions. Moulding is particularly challenging because the parts are in a sensitive off-white colour that require a perfect surface finish. Dimensional tolerances are tight, to ensure good functionality and to avoid water leaks. The complexity of many parts also means that special attention had to be paid to minimise warpage.

High tensile strength is of particular significance for DWE’s water softener, which requires a minimum burst pressure of 34 bar. Further material benefits include the unreinforced polymer’s weld strength, its smooth surface finish and overall colourability: all adjustable parts of the device are moulded in grey, all the others in white.

“We were impressed by the excellent mechanical properties of Delrin and its subsequent performance in field trials. This functional ability, coupled with its aesthetical benefits of surface finish and colourability, made it the ideal material for this water management device,” commented Mr Van de Moortele “As a result, our device weighs less than anything comparable, but without sacrificing efficiency or durability.”
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo