Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Heat treatment strengthens high-pressure die castings

CSIRO : 04 October, 2006  (Technical Article)
Invented by CSIRO Light Metals Flagship researchers, high-pressure die
High-pressure die–cast parts made of aluminium are now able to have their strength doubled through a novel heat treatment process invented by CSIRO Light Metals Flagship researchers.

While heat treatment is commonly used to strengthen wrought and other cast aluminium parts, it has previously not been practical for high-pressure die castings.

'Conventional heat treatment processes applied to HPDC components cause major blistering and distortion, that occurs when air bubbles trapped under pressure during casting expand as they are heated. This ruins the parts' says Dr Roger Lumley, leader of a Light Metals Flagship research team.

'We have developed a heat treatment procedure that provides large strength improvements and an excellent surface finish, without blistering or distortion' he says.

Trials at the CSIRO’s laboratories have shown that the new heat treatment can at least double the strength of high-pressure die cast parts. This means parts need not be as heavy as they currently are to do the same task, a factor that is particularly important in the automotive industry where lighter cars use less fuel and have lower greenhouse gas emissions.

'A lot of these components are designed for their loads and basically the stronger the material, the lighter you can make the part,” says Dr Lumley. “We would like to think that we could see a 30 per cent weight reduction compared to current aluminium castings'.

'The die casting industry is very, very cost sensitive, and if you can use less metal per car part, you also save money'.

'We’ve done trials on large batches of parts purchased from industry and developed treatments for those parts. That has gone really well. The trials show very few rejects due to heat treatment, in a recent batch of 575 parts, only 1 per cent of the parts were rejected due to blistering.'

Dr Lumley says that while aluminium high pressure die casting worldwide is dominated by the automotive industry, other industries can use the new technique. Example applications include builders’ nail gun casings, and even door handles.

“Basically anything that requires cost effective mass production of fairly complex high strength aluminium castings can utilise this process,” Dr Lumley says.

Dr Lumley says the new process could halve the cost of producing high-strength parts, which previously could only be made by alternate, more expensive manufacturing processes.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo