Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Low cost introduction to Oxy-Fuel and Plasma Cutting

ESAB Group : 10 January, 2003  (Company News)
The new low cost Ultrarex UXL-P can be used for many different cutting tasks and provides features and benefits normally associated with more expensive cutting machine technology. It can be used as a high speed plasma machine or alternatively for single or twin head oxy-fuel applications. The combined machine offers high versatility at an economical cost with cutting thicknesses of 100mm achievable with oxy-fuel cutting. For plasma, various systems up to 100 A can be supplied to suit varied cutting requirements. The Ultrarex UXL-P has a cutting width of up to 2,000 mm with two torches and a high speed cutting capability.
The new low cost Ultrarex UXL-P can be used for many different cutting tasks and provides features and benefits normally associated with more expensive cutting machine technology. It can be used as a high speed plasma machine or alternatively for single or twin head oxy-fuel applications. The combined machine offers high versatility at an economical cost with cutting thicknesses of 100mm achievable with oxy-fuel cutting. For plasma, various systems up to 100 A can be supplied to suit varied cutting requirements. The Ultrarex UXL-P has a cutting width of up to 2,000 mm with two torches and a high speed cutting capability.

The Ultrarex UXL-P provides the fabricators with the opportunity to carry out a variety of work in-house thanks to its versatility, reducing outside sub-contract cutting. Increased productivity is offered by the Ultrarex UXL-P by fully automatic cutting cycles for both plasma and oxy-fuel cutting. This is achieved by including systems for automatic ignition, automatic height control and automatic piercing. The cutting processes have been integrated into the machine design. A full oxy-fuel gas distribution system, including a set of solenoids, ensures reliable automatic hole piercing.

Accuracy is a key benefit of the Ultrarex UXL-P and the transverse linear guiding system gives the highest accuracy throughout the entire cutting area. Associated ESAB numerical controls guarantee efficient job preparation. A library with 65 fixed programs is supplied as standard.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo