Europe’s current position in producing bio-based polymers is limited to a few polymers. However, new developments and investments are foreseen: the first European industrial-scale PLA plant by 2014, the introduction of PET production facilities by 2015, recent developments in the commercialization of bio-based PBT and further advancements in the field of high-value fine chemicals for PA, PUR and thermosets production. Although Europe shows a strong demand for bio-based polymers, production tends to take place elsewhere-largely the consequence of an unfavourable political framework for the industrial material use of biomass.
Bio Based Polymers
The Bio-based Polymers Producer Database shows that Europe’s situation in producing bio-based polymers is limited to just a few polymers. Europe has so far established a solid position mainly in the field of starch blends (blends of polymers with native starch or thermoplastic starch) and it is expected to remain strong in this sector for the next few years . Nevertheless, new developments and investments are foreseen in Europe: some years after the installation of industrial scale PLA capacities in North America and Asia, the first European industrial-scale PLA plant is scheduled to become operational in 2014. PET production is growing worldwide, largely due to the Plant PET Technology Collaborative (PTC) initiative, whose global value chain development will lead to the introduction of future production facilities in Europe by 2015. One noteworthy finding of other studies is that Europe shows the strongest demand for bio-based polymers, while production tends to take place elsewhere, namely in Asia and South America. The bio-based polymer production facilities for PLA and PHA located in Europe are currently rather small, and although there are next to no production capacity figures for the latter, several pilot plants are already operating. On the other hand, bio-based PUR and PA production has gradually taken off in Europe and is likely to remain stable in order to supply the growing markets on the building and construction and automotive sectors. Europe does host industrial production facilities for PBAT (shown in figure). Although still fully fossil-based, PBAT is expected to be increasingly bio-based reaching shares of 50% by 2020, to judge by industry announcements and the capacity development of its bio-based precursors. Also for PBT (see table) recent developments in the production of bio-based 1.4 butanediol (BDO) have proven that the bio-based route to the polymer is commercially feasible and its production is planned to have started by 2020 (date not disclosed yet). With leading chemical corporations, Europe has a particular strength and great potential in the fields of high-value fine chemicals and building blocks for the production of PA, PUR and thermosets among others. However, only few specific, large-scale plans for bio-based building blocks with concrete plans for the production of bio-based polymers have been announced to date.
Bio-based polymers, producing companies in Europe and production capacities (tpa)
*Source: Report Market Study on Bio-Based Polymers in the World, 2013-3
**Source: Bio-Based Polymers Producer Database, 2013-07