Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New Vishay Siliconix synchronous buck step-down controller

Vishay Electronic : 08 April, 2007  (New Product)
Vishay Intertechnology, Inc. released two new synchronous buck step-down controller ICs designed to operate with external MOSFETs, and a minimum of external components, in dc to dc converter circuits that require output currents upwards of 10 A.
The high-voltage SiP12201 and low-voltage SiP12202 controllers both are designed to enable flexible, efficient voltage conversion in a broad range of applications in battery-powered, telecom, and industrial end systems. The new devicesí synchronous buck architecture allows voltages to be converted with efficiencies of 93%, prolonging battery life while lowering heat in enclosed field-mounted or rack-mounted systems and reducing the need for cooling systems.

Input voltage range is 4.2 V to 26 V for the SiP12201 and 2.7 to 5.5 V for the SiP12202. Adjustable output voltages for the two devices range from 0.6 V to 20 V for the SiP12201 and from 0.6 V to 5.5 V for the SiP12202. The ability to reach 0.6 V at the low end is a unique capability for a device with a 500-kHz operating frequency and ensures the SiP12201 and SiP12202 will be able to satisfy the future requirements of lower voltages, predicted to decrease to 0.6 V during the next decade.

SiP12201 High-Voltage Step-Down Controller

The high-voltage SiP12201 synchronous buck step-down controller is designed for industrial control; wireless and cable modems; set-top boxes; LCD TVs; telecom power supplies and servers; point of load modules; and for delivering regulated power to microprocessors, ASICs, FPGAs, and DSPs in a wide variety of end products. Able to drive n-channel MOSFETs for both the high-side and low-side in a synchronous converter, the SiP12201 helps to reduce overall design costs by allowing the use of two lower-cost n-channel devices instead of one n-channel and one p-channel device. The SiP12201 also offers the advantage of 500 kHz operation, which allows the use of smaller passive components in converter designs.

SiP12202 Low-Voltage Step-Down Controller

The low-voltage SiP12202 synchronous buck step-down controller is intended for power conversion in battery-powered electronics, as well as in notebook and desktop computers and a wide range of other systems using point-of-load or distributed power converters. The controller can be set to 100% duty cycle to assure continued efficiency during low input-voltage conditions. In the event of a low-battery condition, the chip is able to operate as a low dropout regulator by going to 100% duty cycle.

The SiP12202 drives an n-channel MOSFET on the low side and a p-channel MOSFET on the high side. Use of the p-channel MOSFET on the high side eliminates the need for an external charge pump while also simplifying the high-side gate driver. High-frequency operation up to 500 kHz enables use of smaller passive components for more compact end systems.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   ¬© 2012 NewMaterials.com
Netgains Logo