Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Polypropylene clarifying agent gains first success in extrusion-blow moulding

Milliken Chemical : 05 September, 2010  (Application Story)
Milliken
Bielenda is a Polish manufacturer of cosmetic products made from natural components. Currently the Bielenda range comprises about 400 cosmetics. These include creams, face masks, peelings, balms, slimming, tanning, depilation and intimate hygiene products, as well as hair care and styling products and aromatherapy bath oils. The products may be purchased both in small beauty supply stores and in big supermarkets.

The company also has its own professional cosmetic line - Ideal Skin - designed for spa and wellness centres and beauty salons.

Bielenda cosmetics are also available in the USA, Canada, Singapore, Germany, Russia, Czech Republic, Ukraine, Slovakia, Latvia and Hungary. The company is currently launching its products in the UK and Kazakhstan.

Natural cosmetics company Bielenda, in Krakow, has just begun marketing a new range of bath oils labelled Afrodyzjak, Ekstaza and Euroforia. They will be sold in various European countries, as well as on other continents. Bielenda wanted to pack the products, intended to stimulate the senses, in bottles that showed off their colours and transparency to best advantage, and which were in keeping with the very high quality image it was trying to promote.

After considering various processing technologies and alternative materials, including PVC and PETG, Bielenda picked extrusion-blow moulded bottles made from an ultra-clear polypropylene containing Milliken’s high performance clarifier Millad NX8000.

The polymer, with its low density and high mechanical properties, lets Bielenda minimize materials usage: polypropylene bottles can weigh around 20 percent less than PVC versions and as much as ten percent less than PETG bottles. Additionally, it is fairly easy to process (no need for pre-drying) and there are no issues with equipment corrosion. Extrusion blow moulding is a highly cost-effective process and allows for great freedom of design.

'The level of transparency provided by Millad NX8000 helps our products successfully stand out from others on the shop shelf,” says Bielenda’s marketing manager Magdalena Kocwin. “We invest significant resources in developing natural cosmetics and the packaging should emphasise the message. We expect this combination of an excellent product in an outstanding package to be particularly attractive to consumers looking for something a little bit special.”

Although blow moulding only accounts for a small fraction of all polypropylene consumption, PP does have a significant share in the plastics packaging market overall, and is second behind HDPE in the extrusion blow moulding market.

“Milliken’s Millad 3988 clarifying agent for polypropylene has been the industry standard since the early 90’s,” says Bernard Vermeersch, Senior Development Engineer at Milliken. “Millad NX8000 takes clarification to the next level, and that is obvious when you look at what it achieves in injection moulded and injection-blow moulded containers.” Its typical 50 percent reduction in haze versus the current industry standard makes highly transparent polypropylene a reality, even in relatively thick wall sections.

But until very recently the benefit has been more difficult to see in EBM containers than in other types of containers, because clarity depends to a certain extent on wall surface. Normally, the low pressures and the mould surface finish used in EBM don’t yield the best wall surfaces.

“Now, latest resin designs help combat this problem,” notes Vermeersch. “New grades containing Millad NX8000 can yield EBM bottles with opticals on a par with PVC. Processors can achieve gloss levels of 120 at an angle of 60 degrees, clarity levels of 95% and haze as low as 6%. These values have never been achieved before with PP in EBM.

For relatively low volumes, Extrusion blow moulding with Millad NX8000 clarified PP is much more cost efficient than injection-stretch-blow moulding with PET.

Milliken expects many more applications for Millad NX8000 in extrusion-blow moulded PP containers in the coming months.

Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo