|
DIAMOND NANOTUBE TECHNOLOGY PROMISES NEW ELECTRONICS PRODUCTS
21 March 2007 - DOE/Argonne National Laboratory
| The newest promising material for advanced technology applications is diamond nanotubes, and research at the U.S. Department of Energy's Argonne National Laboratory is giving new insight into the nature of nanodiamond. |
Argonne researcher Amanda Barnard, theorist in the Center for Nanoscale Materials, is working with colleagues at two Italian universities who produced innovative diamond-coated nanotubes. The diamond-coated tubes resemble a stick of rock candy, holding a layer of diamond 20 to 100 nm thick. A nanometer is one millionth of a millimeter. The period at the end of this sentence is about one million nanometers long. The technology in its fledgling state has already caught the eye of the electronics industry for the promise of ultra thin televisions with cathode ray tube-like quality picture at a fraction of today's current flat panel television costs. Diamond offers an amazing array of medical and technological possibilities. Wire molecules can be attached to it, and diamond has superior light-emission properties. While diamond is an insulating material, the surface is highly electronegative. A nanodiamond coating consists of pure surface diamond. This gives a diamond coated nanowire conductance from the nanotubes and the superior conduction from the diamond. Add to this superior light-emission properties and very low voltage requirements, and the possibility exists for very flat, low energy displays. “By using a more efficient conductor, nanotubes, with a more efficient field emitter, in this case nanodiamonds, you get more efficient devices,” said Barnard. “A lot of groups are looking for something better to make electronic displays out of, and this is just another candidate that looks very promising.” Researchers from the University La Sapienza and the University Tor Vergata discovered the ability for a nanotube to grow nanodiamond under certain conditions, but did not know the specifics of how the diamond grew. To better understand the conditions that brought them their discovery, researchers from the group brought their discovery to Barnard. “They could make them, but they couldn't understand exactly what was happening or how they were forming,” said Barnard. “They knew what it was, they could characterize it, but they didn't know how the growth progressed.” Barnard calculated that during the process of etching, the term for the degradation of nanotubes, atomic hydrogen can change the hybridization of chemical bonds between carbon atoms of a nanotube. “Traditionally in a hydrogen environment carbon nanotubes would fall apart and disintegrate, but something different was happening. We actually established that if the amount of hydrogen present [is in correct proportion], the defects that form will nucleate into diamond before there is a chance to etch.” These imperfections that form uniformly across the nanotube's surface allow for the bonding of diamond molecules, which then begin to grow the length of the tube. An added bonus property is that the end of the nanotube is coated with a thicker bulb of nanodiamond, and upon formation the structures stand upright without manipulation. Barnard is now on a fellowship at the University of Oxford, but is continuing to conduct research at the Center for Nanoscale Materials, now under construction. Barnard has great expectations for the opportunities the new center will open up for nanoscale research. “I hope that the CNM will give me more opportunity to collaborate with experimental groups,” said Barnard. “I am a great advocate of doing experimentally relevant theory, and the CNM will be a great place for doing that.” The Center for Nanoscale Materials at Argonne is being built with funding from the Department of Energy Office of Science and the State of Illinois, each of which is contributing $35 million to construction and instrumentation of the facility. The nation's first national laboratory, Argonne National Laboratory conducts basic and applied scientific research across a wide spectrum of disciplines, ranging from high-energy physics to climatology and biotechnology. Since 1990, Argonne has worked with more than 600 companies and numerous federal agencies and other organizations to help advance America's scientific leadership and prepare the nation for the future. Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science.
http://www.anl.gov
About: DOE/Argonne National Laboratory
Argonne National Laboratory is one of the US Department of Energy's largest research centres. It is also the nation's first national laboratory, chartered in 1946. Argonne is a direct descendant of the University of Chicago's Metallurgical Laboratory, part of the World War Two Manhattan Project. After the war, Argonne was given the mission of developing nuclear reactors for peaceful purposes. Over the years, Argonne's research expanded to include many other areas of science, engineering and technology. Today, the laboratory has about 4000 employees, including about 1200 scientists and engineers, of whom about 700 hold doctorate degrees. Argonne occupies two sites. The Illinois site is surrounded by forest preserve about 25 miles southwest of Chicago's Loop. About 3200 of Argonne's 4000 employees work on the site's 1500 wooded acres. The site also houses the US Department of Energy's Chicago Operations Office. Argonne-West occupies about 900 acres about 50 miles west of Idaho Falls in the Snake River Valley. It is the home of most of Argonne's major nuclear reactor research facilities. About 800 of Argonne's employees work there. |
More News:
For March 2007
From DOE/Argonne National Laboratory
For National Laboratory
|