|
DOW CORNING SILICONE SEALANTS AND COATING STOP LEAKS ON LUXURY CONDO
13 April 2007 - Dow Corning - EEI
| The owners of a luxury high-rise condominium in Myrtle Beach, North Carolina, were dismayed when their 22-story building began experiencing widespread leaking problems soon after construction was completed. Dow Corning brand sealant products were used to restore the building’s stucco curtainwall, and also facilitated a repair process that was fast, unobtrusive and cost-effective. |
Failed Sealant Joints Cause of Water Penetration
Brighton Condos at Kingston Plantation is a 500-unit luxury housing project built in 2001. A study by engineering consulting firm R.J. Kenney Associates, Inc., of Plainville, Massachusetts revealed failed sealant joints and unsealed gaps around the stucco envelope’s flashing and accessory points. The exterior stucco panels also had isolated hairline cracks typically found on stucco-clad buildings. R.J. Kenney recommended a comprehensive repair and weatherproofing solution that included Dow Corning 790 Silicone Building Sealant, Dow Corning 795 Silicone Building Sealant and Dow Corning AllGuard Silicone Elastomeric Coating. Michael Kenney, director of technical services for R.J. Kenney, explained that the building’s exterior envelope required extra protection because of its height and location on a beach in a hurricane zone. “Some external systems, such as one-coat stucco, don’t tolerate long exposure to water. So if you’re in an area with frequent rainfall, you have to make the outer skin of the building as watertight as possible. That’s why it’s so important to upgrade to the best waterproofing products available, like Dow Corning silicone sealants and AllGuard,” he said. Dow Corning Sealants Products of Choice
R.J. Kenney Associates and contractor Pro-Tec Finishes of Mt. Holly, North Carolina, recommended to the condominium’s owner association that Dow Corning 790 and 795 sealants be used to replace most of the old sealant. (The failed joints had been filled with a combination of urethane and non-Dow Corning silicone sealants.) In addition, the structure’s envelope would be sealed with AllGuard coating after the joint repairs had been completed. The entire project cost an estimated $525,000 and required six months to complete with a crew of about a dozen workers. According to Roger Koehler, project manager for Pro-Tec, there was never any question that Dow Corning products would be used for the repair. “We have a high degree of confidence in Dow Corning products and in the Dow Corning warranty,” he said. “We have worked on similar projects with R.J. Kenney and have had a very good success rate using these products.” Kenney agrees: “Dow Corning has high-quality silicone sealant products that we’ve had decades of experience with.” Repair Procedures and Sealants Undergo Rigorous Testing Pro-Tec’s repair procedures involved a three-step process: •First, they cleaned and prepped the entire exterior surface. •Next, they applied about 100 gallons of Dow Corning 790 Sealant around the balconies and in stucco surface cracks. Windows and stucco joints were re-sealed with about 300 gallons of Dow Corning 795 sealant. •Finally, they covered the building envelope with about 2,500 gallons of AllGuard Coating Koehler explained that product selections and repair methods were decided upon after close consultation among the project’s contractors, engineers and suppliers. “We try to partner with the manufacturer and get their input up front,” he said. Before work began, Pro-Tec did a mock-up of the proposed repair procedures and R.J. Kenney tested it for weatherproofing effectiveness. Dow Corning products and Pro-Tec’s application methods passed with solid results. Durability of Silicone Results in Long-term Savings
According to Kenney, “Dow Corning 790 displays excellent durability and bond to porous substrates like stucco and concrete, while 795 is a great all-around sealant.” He was also enthusiastic about AllGuard Coating’s ability to bridge minor surface cracks. “It has greater hydrophobic properties than acrylic coatings and better color retention,” he said. “The owners will also be able to avoid frequent recoating because AllGuard doesn’t break down under UV light like an acrylic would.” Koehler estimates that the building owners will save about $1 million in recoating costs over 20 years.
http://www.dowcorning.com
About: Dow Corning - EEI
Reader Enquiries: Belgium
Tel: Fax: +32 64 88 89 66
Email:
Web:
Dow Corning - EEI
Email: nathalie.thomas@dowcorning.com
Tel: +33 4 42 61 31 39
Fax: +32 64 888966
Multibase (www.multibase.com), a Dow Corning company, is a leading global supplier of differentiated Thermoplastic Elastomer materials and solutions. Multibase's headquarters is located in France with manufacturing facilities in the US, France and India, and commercial offices around the world.
Dow Corning (www.dowcorning.com), which develops, manufactures and markets diverse silicon-based products, currently offers more than 7000 products and services to customers worldwide. Dow Corning is a global leader in silicon-based materials. Its shares are equally owned by Dow Chemical Company and Corning Incorporated. More than half of Dow Corning's sales are outside the United States. Multiflex are trademarks of Multibase S.A.
Dow Corning, TPSiV and Silastic are a registered trademark of Dow Corning Corporation. |
More News:
• For April 2007
• From Dow Corning - EEI
• For Additives and Chemicals
|
