 |
| Main Menu | News By Date | News By Supplier | News By Category | About Us |
|
PARKES GEARS UP FOR ANOTHER 45 YEARS
Mr Brian Wilcockson, Site Services Engineer for CSIRO’s Australia Telescope National Facility, says the work is preventative maintenance. “The gears were starting to show wear three or four years ago, and we decided to step in early,” Mr Wilcockson says. The new gears were made by Western Australian firm Hofmann Engineering Pty Ltd. “Fortunately we still had the original construction drawings, which came from a German company,” says Wilcockson. “Hofmann has a German background, so the notes on the drawings were no problem for them!” The six new gears range in size from 600mm diameter to 1200mm, the largest weighing about a tonne. They are attached to the rollers that make the telescope turn in the horizontal plane. “The new gears replace the ones fitted to the telescope when it was built in the late 1950s.” “The rollers support the weight of the telescope,” Mr Wilcockson says. “The gears are part of that whole assembly.” Rather than jacking up the telescope and taking off the gearboxes, the engineers will remove the gears from inside the gearboxes while the gearboxes are still on the telescope. The Parkes telescope is one of the world’s most productive. A recent American study found that, for the period surveyed, in a group of more than 20 ground-based radio telescopes worldwide, Parkes produced the third-highest number of scientific papers and received the second-highest number of citations.
|
| ©2008 New Materials International |