TWO-COMPONENT ADHESIVE REVOLUTIONISES STRUCTURAL BONDING OF PLASTICS

Main Menu | News By Date | News By Supplier | News By Category | About Us

TWO-COMPONENT ADHESIVE REVOLUTIONISES STRUCTURAL BONDING OF PLASTICS
01 September 2003 - 3M Europe

The difficulties associated with materials exhibiting low surface energy such as polyethylene and polypropylene, are now to become a thing of the past with the launch of a new two-part adhesive from 3M that delivers a high strength structural bond on such plastics.

3M Scotch-Weld DP-8010 Structural Plastic Adhesive has been developed not just to replace mechanical fixing or fusion joining techniques, but to offer the possibility of bonding to low surface energy plastics without the need for specialised surface pre-treatments.

Whilst Scotch-Weld DP-8010 Structural Plastic Adhesive can be used to bond a wide range of materials such as wood, primed or painted metals, plastics and glass, its real strength lies in securing adhesion between hard-to-bond substrates such as polyolefins with the minimum amount of surface preparation. Typically only a light wipe of the surfaces to remove dust, water or oil is required.

Complementing its bonding strength, Scotch-Weld DP-8010 also delivers improved productivity. This solvent-free, acrylic-based visco-elastic adhesive cures at room temperature, saving time as well as the space requirement and overhead costs of heaters, curing ovens or UV lamps.

Offering ten minutes open time, Scotch-Weld DP-8010 gives a comfortable margin for the accurate positioning and, if necessary, the re-positioning of large or multiple components. Moreover, with time to handling strength reached in a 1.5-2 hour period, it facilitates production cycle times. Final strength is reached after 8-24 hours at room temperature but this can be reduced to 30 minutes with assisted heating between 70-75C. In either case, bond strength equates with that of the substrates and the bond itself is resistant to humidity, water and many commonly used solvents.

The high strength, load-bearing capability of Scotch-Weld DP-8010 gives it an immediate fit in a broad range of applications across the complete spectrum of industries but with special emphasis on the most demanding sectors. These include transportation, aerospace, automotive and construction markets.

The product has been designed for convenience use. 3M Scotch-Weld DP-8010 is available in Duo-Pak 38 ml and 265 ml cartridges for use in the 3M EPX applicator system that simultaneously and accurately mixes and dispenses the two-component adhesive.

http://www.mmm.com

About: 3M Europe
3M is a $ 16 billion diversified technology company with more than 40 business units, which are organized into six markets: Transportation, Graphics and Safety, Health Care, Industrial, Consumer & Office, Electro & Communications and Specialty Material. 3M Engineered Adhesives Division provides manufacturers with a broad range of innovative bonding, sealing and fastening solutions to help improve the design, assembly and performance of their products.

More News:
  • For September 2003
  • From 3M Europe
  • For Adhesives