ALUMINUM FILLED EPOXY AVAILABLE FOR ENHANCED MACHINABILITY

Main Menu | News By Date | News By Supplier | News By Category | About Us

ALUMINUM FILLED EPOXY AVAILABLE FOR ENHANCED MACHINABILITY
08 May 2003 - Master Bond

A new room temperature curing, aluminum filled two component epoxy adhesive called EP22 has been introduced by Master Bond Inc. Hackensack N.J. This system has an easy to use one to one mix ratio by weight or volume. It produces durable high strength and tough bonds with outstanding adhesion to metals, particularly steel and aluminum. Bonds are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents.

Master Bond EP22 is readily and easily machinable. It has good void filling properties. It can be employed over the wide service operating temperature range of -60°F to more than 250°F. Shrinkage upon cure is low and dimensional stability is high.

EP22 is gray color. Cures of EP22 can be accelerated by use of heat. It is available for use in pint, quart, gallon and 5 gallon container kits.

http://www.masterbond.com

About: Master Bond
Master Bond is a leading manufacturer of high performance adhesives, sealants, coatings, potting and encapsulation compounds and impregnation resins. Our line of products consists of epoxies, polyurethanes, silicones, acrylics, polyamides and latex systems. They also include such specialties as anaerobics and cyanoacrylates. One and two component systems are available. Systems cure at room temperature, exposure to heat and upon exposure to UV light.

More News:
  • For May 2003
  • From Master Bond
  • For Adhesives