 |
| Main Menu | News By Date | News By Supplier | News By Category | About Us |
|
NEW VISHAY MICRO-MEASUREMENTS SEALED WELDABLE STRAIN GAGES
The new strain gages from Vishay Micro-Measurements are specially designed to accommodate spot welding to structures and components in circumstances that preclude clamping and curing an adhesively bonded gage installation, or when high temperatures prevent the use of an elevated-temperature-curing adhesive. Each gage is pre-bonded with a high-performance adhesive to a thin 0.005 in. [0.127 mm] stainless steel carrier. To increase reliability and reduce the time and labor required for installation, each gage is sealed in-factory, fully encapsulated with a protective coat that provides resistance to moisture. Three leadwire configurations are available to provide the best fit for a given application, environment, and/or installation. Gages in the R leadwire series are designed for long-term, outdoor use in applications such as railroad and civil structures, where they may be exposed to oil and water splash or short-term submersion. These gages feature a metal carrier processed to give good first-cycle data, excellent fatigue resistance, and a high strain range. The T leadwire series of Sealed Weldable Strain Gages is typically used in larger civil structures including bridges, dams, and buildings, or in applications with exposures of up to a year in sea water. These gages are designed to withstand exposure to water pressures of up to 500 psi, as well as short-term (up to 14 days) immersion in crude oil. A flexible, stainless steel tube provides wire routing from the strain gage to a cable transition, thereby facilitating fine positioning of the sensor and providing strain relief. Gages in the L leadwire series offer performance comparable to that of gages in the T leadwire series and - without an integrated cable transition - a more compact configuration that enables their use in applications with greater space constraints. These gages are suited for applications with smaller strains, but anchoring the leadwire during installation can provide for strain relief. All three gage configurations feature nominal resistance of 350 Ω, a nominal gage factor of 2.0, a gage length of 0.125 in., and a shielded vinyl leadwire. Both axial and shear grid geometries are available. Vishay's Sealed Weldable Strain Gages have a ±5000 microinch/in. strain range and a normal operating temperature range of +32 °F [0 °C] to +180 °F [+83 °C]. Gages in this series may be installed on surfaces with a radius of curvature of 3.0 in. [76 mm] or greater.
|
| ©2008 New Materials International |