|
GATE THE SMALLEST PARTS WITH NEW NOZZLE
23 October 2002 - Husky Injection Molding Systems
| Husky Injection Molding Systems has introduced the newest member of its Ultra hot runner nozzle family, the Ultra 250. With a bore diameter of only 11mm and a minimum nozzle spacing of 18mm, the Ultra 250 is ideally suited for inside gating or small pitch mould layouts. |
Husky Injection Molding Systems has introduced the newest member of its Ultra hot runner nozzle family, the Ultra 250. With a bore diameter of only 11mm and a minimum nozzle spacing of 18mm, the Ultra 250 is ideally suited for inside gating or small pitch mould layouts. The Ultra 250 is Husky’s smallest nozzle and is guaranteed leak proof for three years. “The Ultra 250 nozzle is an upgrade from the existing 250 Series,” says Martin Baumann, Marketing Manager, Husky Hot Runners. “The new nozzle has an optimised thermal profile and reduced heat losses. Plus, a new material for the nozzle housing has allowed us to open the melt channel up to 4mm, while maintaining the maximum allowable injection pressure of 22,000 psi (1517 bar).” The design of the Ultra spring provides pre-load against the manifold in cold conditions, thereby eliminating the risk of cold start leakage. The Ultra 250 is an ideal nozzle for any application that has a small or difficult to gate part.
http://www.husky.ca
About: Husky Injection Molding Systems
Husky Injection Molding Systems is a global supplier of injection moulding equipment and services to the plastics industry. With one of the broadest product lines in the industry, customers use Husky equipment to manufacture a wide range of products in the packaging, technical and automotive industries. The company has more than 40 service and sales offices, supporting customers in more than 100 countries. Husky’s manufacturing facilities are located in Canada, the United States, Luxembourg and China. The company’s common shares (HKY) are listed on the Toronto Stock Exchange and are included in the S&P/TSX Composite Index. |
More News:
• For October 2002
• From Husky Injection Molding Systems
• For Injection Moulding Equipment
|
