|
MOOG’S SERVOCARTRIDGE VALVES OFFER HIGH DYNAMICS AND FLOW CAPABILITIES
12 August 2006 - Moog Controls
| Moog has introduced into the U.S. market several high dynamic closed-loop cartridge valve products that allow machine builders to make compact integrated systems with exceptional performance. Available in two-way and three-way valves, this product line offers high flow rates and rapid step response. |
Moog has introduced into the U.S. market several high dynamic closed-loop cartridge valve products that allow machine builders to make compact integrated systems with exceptional performance. Available in two-way and three-way valves, this product line offers high flow rates and rapid step response. Moog’s servocartridge valves feature a poppet and sleeve design in sizes NG 40, 50, 63, and 80 and a spool and bushing design in sizes NG 30, 50, and 63. The SE 3 servocartridge valve has a frequency response of 170 Hz at –3dB and a 12 ms step response time at 100% stroke. The DSHR servocartridge has flow rates up to 6100 l/min [165 gpm](@ 5 bar [72.5 psi] pressure drop) and a 12 ms step response time at 100% stroke. Closed-loop control is through a servopilot valve with a feedback device on the mainstage. On or off-board electronics are available. Applications such as die casting, high-speed injection molding, and testing equipment benefit from the performance advantage offered by these new servocartridge products. “Our line of closed-loop cartridge valves will ensure that Moog products, known for quality and technical superiority, are available to meet the highest performance requirements of our customers” commented David Geiger, Manager, Industrial Systems Engineering Manager.
http://www.moog.co.uk
About: Moog Controls
Moog Controls started life in the UK in October 1965 as Moog Hydra-Point, based in Cheltenham, England. This new subsidiary was set up to manufacture and market the Moog Hydra-Point machines in the UK, South Africa and European common market.Nearly 40 years later, not only does MCL manufacture a suite of products for motion control applications, they are also active in the design and development of new and innovative solutions for precision control problems. Our team of highly skilled engineers can provide project support to assist our customers in the performance of a wide variety of applications including, motion simulators for training and entertainment, industrial gas turbine controls, plastics machinery controls, heavy industry, metal forming & pressing, and commercial and military ground vehicle controls. All Moog subsidiaries are represented by regional sales engineers backed by comprehensive product and engineering support teams. Add to this the global presence of Moog and you are ensured a competent partner to deliver and service you and your customers needs. MCL employs over 270 people on its Tewkesbury site, accommodated in 3 buildings, producing over 21,500 servovalves per annum. |
More News:
• For August 2006
• From Moog Controls
• For Abrasives
|
