CREATING THE RIGHT VIBRATIONS, IN A CAR

Main Menu | News By Date | News By Supplier | News By Category | About Us

CREATING THE RIGHT VIBRATIONS, IN A CAR
26 December 2006 - Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.

To give their cars the right acoustic properties on the road, manufacturers check them out on a variety of test rigs, a complicated and expensive undertaking. A new adaptive car structure test facility combines stress and hydraulic testing stations in a single compact model.

For some motorists, the hearty rattling of an engine is part of the fun of driving. But most people prefer a motor with a somewhat more unobtrusive sound. For this reason, car makers thoroughly test the acoustics of the various models and their tires at different speeds and on different types of road surfaces. In special test rigs, cars roll on drums that measure two to three meters in diameter, with various road surfacing materials attached round them in adjacent strips. Such test rigs are expensive, can be dangerous at high speeds, and require a good deal of space. What is more, they are not suitable for examining the effects of road surface imperfections and similar sources of vibration, this can only be done with hydraulic systems.

Researchers at the Fraunhofer Institute for Structural Durability and System Reliability LBF in Darmstadt have for the first time developed a test rig that combines all of the various trials in a single system. "We expanded the hydraulic test rigs by adding a highly dynamic stress interface, so that we can now simulate structural loads in frequency ranges up to 50 Hz as well as vibro-acoustic stress in the 50 to 1000 Hertz range", explains Michael Matthias, deputy director of the Mechatronic / Adaptronics Competence Center at LBF. The researchers begin by using sensors to record vibrations on the tires and in the car interior that occur when driving on various road surfaces at different speeds and with different tire profiles. These vibrations are then archived in a database, so that they can be quickly be fed into the test rig. "We use an algorithm to modify this vibration signal in the same way that it would change on its way to the ear during real-world driving", explains Matthias. "That way, we get a realistic sound." On the test rig, the wheels are replaced by electric motors that work against the car's acceleration and simulate the resistance generated by gradients and road friction.

This "adaptive car structure test facility" gives the scientists an environment in which to develop active systems for preventing vehicle vibrations. But it is also suitable for test operations by auto manufacturers. The researchers have already succeeded in producing realistic vibrations along the Z-axis (vertical in relation to the road), they still need a bit more time on the lateral vibrations, such as those that occur in curves.

http://www.fraunhofer.de

About: Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.
The Fraunhofer-Gesellschaft undertakes applied research of direct utility to private and public enterprise and of wide benefit to society. Its services are solicited by customers and contractual partners in industry, the service sector and public administration. The Fraunhofer-Gesellschaft maintains over 80 research units at more than 40 different locations throughout Germany. A staff of some 12,700, predominantly qualified scientists and engineers, works with an annual research budget of over one billion euros. Of this sum, more than € 900 million is generated through contract research. Two thirds of the Fraunhofer-Gesellschaft’s contract research revenue is derived from contracts with industry and from publicly financed research projects. The remaining one third is contributed by the German federal and Länder governments, as a means of enabling the institutes to pursue more fundamental research in areas that are likely to become relevant to industry and society in five or ten years’ time.

The Fraunhofer-Gesellschaft is also active on an international level: Affiliated research centers and representative offices in Europe, the USA and Asia provide contact with the regions of greatest importance to present and future scientific progress and economic development.

More News:
  • For December 2006
  • From Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.
  • For Contract Research Organisation