NEW FILLER METAL DEVELOPED FOR 13CR PIPELINES
04 October 2001 - Sandvik Materials Technology UK

Seen by Sandvik as a major breakthrough, the new filler metal, a variant of the super duplex grade Sandvik 25.10.4.L, has been produced with a controlled and low hydrogen level thereby reducing the risk of cracking in the weld. Developed to provide a consumable with precise composition to match the properties of the parent metal, Sandvik has been able to make full use of its research and metallurgical resources and its control of material processing, from steel melt through to the finished consumable, in order to minimise the hydrogen content.

The new consumable can be used for MIG welding with excellent weldability and weld deposit properties. In addition to its excellent general corrosion resistance, 25.10.4.L has high resistance to pitting and good resistance to stress corrosion cracking in sulphur bearing environments.

Independent testing with 13% chrome pipe indicated that in use the new Sandvik 25.10.4.L with low hydrogen gave less spatter than wire from competitors, tolerates a larger oscillation width, faster pulsing and longer arc length and has good edge wetting characteristics.

http://www.smt.sandvik.com/uk

More News:
  • For October 2001
  • From Sandvik Materials Technology UK
  • For General