|
NEW 4 MM PRESSURE AND TEMPERATURE SENSOR WITH EVEN BETTER RESPONSE
21 January 2007 - Kistler Instruments
| The world's smallest combined pressure and temperature sensor Type 6189A...with a front diameter of 2.5 mm has been extremely well received by the injection molding industry. Kistler has now transferred its advantages to the new sensor Type 6190B... with a front diameter of 4 mm, whose thermocouple leads are also threaded through the pressure meas-uring elements. |
The world's smallest combined pressure and temperature sensor Type 6189A...with a front diameter of 2.5 mm has been extremely well received by the injection molding industry. Kistler has now transferred its advantages to the new sensor Type 6190B... with a front diameter of 4 mm, whose thermocouple leads are also threaded through the pressure meas-uring elements.
The new sensor consequently also responds even faster to variations in temperature. At the same time its pressure elements offer an increased sensitivity of 9 pC/bar, which is on a par with the standard pressure sensor Type 6157B... The new combination comes with a new method of connection using a cable easily replaced on site. Measurement of the contact temperature in addition to the cavity pressure yields valuable process information for optimizing and monitoring injection molding. Kistler's family of sensors for combined pressure and temperature acquisition measures both process variables at the same point. The thermocouple located at the very front of the sensor determine the direct melt contact temperature.
http://www.kistler.com
About: Kistler Instruments
Kistler is one of the world's leading suppliers of measurement technology. Kistler pressure sensors, force sensors and accelerometers use the piezoelectric effect for precise measurement of mechanical properties. Kistler is a privately-owned Swiss company which develops and manufactures sensors and electronics for measuring pressure, force and acceleration. Additionally, the functionality of electronics plays an increasing role when defining a measuring system and even more frequently, electronics in fact becomes part of the sensor itself. Most of Kistler's products have been developed in close cooperation between leading universities or research facilities and Kistler's engineers. Investments in Kistler's research department have led to the development of new crystals which enable reliable measurements to be taken under the most extreme environmental conditions. The results of our in-depth crystal research will give us a leading edge in advancing the state-of-the-art. |
More News:
• For January 2007
• From Kistler Instruments
• For Pressure sensors
|
