 |
| Moog's new digital interface valve, distributed control with advanced communication capabilities |
13 August 2006 - Moog Controls
Moog Inc. has introduced the Digital Interface Valve with fieldbus communications and configurable functions that enable customers to define the dynamic behavior of the valve and adapt its characteristics to particular application requirements. |
|
|
| Moog’s Servocartridge valves offer high dynamics and flow capabilities |
12 August 2006 - Moog Controls
Moog has introduced into the U.S. market several high dynamic closed-loop cartridge valve products that allow machine builders to make compact integrated systems with exceptional performance. Available in two-way and three-way valves, this product line offers high flow rates and rapid step response. |
|
|
| Moog’s new high flow direct drive servo-proportional valve |
11 August 2006 - Moog Controls
Moog. Inc., Industrial Controls Division, has introduced a new Direct Drive Servo-Proportional Valve that offers the highest flow for applications where greater speed is required. The new D634-P offers this performance advantage, while providing the benefits of safety, energy savings, and responsiveness that characterize Moog’s Direct Drive Valve product line. |
|
|
| Moog introduces servo gearmotor with high performance and reliability |
10 August 2006 - Moog Controls
Moog. Inc., Electric Products Division, has introduced a new Servo Gearmotor with a patented design that offers high performance, improved efficiency, high power density, maximum reliability, optimized heat transfer, and smaller package size for industrial applications. This product features a low backlash single stage gearbox integrated with a high-performance servomotor. It is available in three frame sizes (55 mm, 70 mm and 100 mm) with two defined gear ratios per frame size, combined with four motor stack lengths. |
|
|
| Moog’s new Powershot Injection System combines hydraulic and electric technology |
09 August 2006 - Moog Controls
Moog has introduced the new Moog PowerShot Injection System that combines the best of electric and hydraulic technologies in a compact unit that can be installed easily, and adapted to a wide variety of force, speed, and torque requirements. This unique system is designed for injection molding machines operating at high speeds and forces, which require precise control. |
|
|
| Moog Inc. completes new state-of-the-art design, manufacturing, and testing facilities for RKP pumps |
08 August 2006 - Moog Controls
Moog Inc. announced the completion of new facilities for manufacturing of radial piston pumps (brand name RKP Pumps) in Nuremberg, Germany, and for advanced product design and testing in Böblingen, Germany. With a combined investment of 12 million euro, the project constitutes a major development effort for Moog’s European operations. |
|
|
| Moog introduces new 4 channel 400 point modular parison controller with advanced software platform |
07 August 2006 - Moog Controls
Moog is introducing its new 4 Channel 400 Point Modular Parison Controller with an advanced software platform. The new controller allows blow molding machine manufacturers to control multiple heads and more points with less material consumption and reduced scrap. |
|
|
| Moog demonstrates advanced solutions for injection and blow molding machines |
06 August 2006 - Moog Controls
Moog will exhibit working demonstrations of new motion control products and systems using electric, hydraulic, and combined hydraulic-electric technologies. Displays at Booth No. 10-J04 in Hall 10 will feature advanced solutions that will help for injection and blow molding machine manufacturers to improve performance and overcome technical challenges. |
|
|
| New Moog TMC-4 means higher quality and productivity |
05 August 2006 - Moog Controls
Moog will be introducing its new Total Machine Controller, TMC-4, for blow molding machines at the K Show. Moog displays will be at Booth No. 10-J04 in Hall 10. The TMC-4, the fourth generation design of this proven controller design, allows the user to easily operate all types of blow-molding machines, accurately and without expensive training. |
|
|
| Moog provides Servovalves for the World’s largest paper machine |
04 August 2006 - Moog Controls
Moog is supplying over 600 digital Servovalves and Servo-Proportional valves on a new machine developed by pulp and paper industry machinery builder Metso Paper, Inc., Jyvaskyla, Finland. Moog’s Digital Interface Valve (D638 Series) and the Digital pQ Servo-Proportional Valves (D941 Series) will be used on Stora Enso´s, Kvarnsveden mill, new high quality SC paper machine with start-up. |
|
|
| Moog acquires ProControl to expand electric solution offerings to the plastics industry |
04 August 2006 - Moog Controls
ProControl AG, the Switzerland based expert on Motion Control Solutions for the plastics industry, has been acquired by Moog Inc. Moog is a leading supplier of hydraulic and electric motion control solutions to machine builders. |
|
|
| Moog introduces new radial piston pump with digital control |
03 August 2006 - Moog Controls
Moog Inc. is introducing a new version of its popular Radial Piston Pump with digital control and a fieldbus interface. Moog has significantly improved the control technology of the well-known RKP Pump with the addition of a new proportional pilot valve with digital on-board electronics for flow and pressure regulation, tuning, and diagnostics. The new digital RKP was the result of a major research and development effort that enabled performance and system optimization never before possible with a servopump. |
|
|
| Moog provides special axis control servovalve for wind turbines |
02 August 2006 - Moog Controls
Moog has developed a unique “pitch control valve” that uses the latest digital technology for position control for wind turbines for MADE Tecnologías Renovables S.A. This intelligent servovalve has been enhanced with digital communication and embedded motion control capabilities that enables it to close the position loop within the valve. This axis control functionality is a revolutionary development. It enables performance, reliability, remote diagnostics, and process control in one device, which is functionality that could never be achieved with conventional valve technology. The intelligence embedded in this device also enabled the customer to eliminate the cost and complexity of the external controller. |
|
|
| Moog announces selection on Boeing 7E7 |
01 August 2006 - Moog Controls
Moog Inc.announced today that it has entered into a long-term agreement with the Boeing Commercial Airplanes Company to supply the primary flight control actuation system for Boeing’s new 7E7 Dreamliner. The Moog system will control all of the primary flight control surfaces on the airplane, as well as the spoilers and the horizontal stabilizer. Shipsets will include 30 actuators and associated control electronics. |
|
|
| Moog FCS and Flightsafety International receive level D certification for the new FAA |
31 July 2006 - Moog Controls
Moog FCS and FlightSafety International today announced they have been awarded Level D Certification from the United States Federal Aviation Administration for the world's first full flight simulator equipped with electric motion and control loading systems that they have designed and manufactured. |
|
|
| A new generation of radial piston pumps by Moog |
13 April 2006 - Moog Controls
Low noise, greater reliability, easy control options are demands on modern piston pumps. To lower both the noise emission and the high and low-pressure pulsation, the number of pistons of a radial piston pump is increased from 7 to 9. By means of CFD and FE calculation the suction path of the RKP is optimized as a compromise between hydraulic (low pressure drop, small inductivity) and mechanic (small deformation, low stresses) functionality. Pressure drop along the suction path was reduced by 20%. The sound emission of the new radial piston pump generation was reduced by up to 5dB(A) in sound power that corresponds to a reduction of wide more than 50%. A new stroke ring design eliminates a possible place of wear. The DCP (Digital Interface Pump) is a new servo radial piston pump adjustment based on a new pilot valve with digital onboard electronics offering an enhanced functionality. |
|
|
| A new generation of radial piston pumps |
31 March 2006 - Moog Controls
Low noise, greater reliability, easy control options are demands on modern piston pumps. To lower both the noise emission and the high and low-pressure pulsation, the number of pistons of a radial piston pump is increased from 7 to 9. By means of CFD and FE calculation the suction path of the RKP is optimized as a compromise between hydraulic (low pressure drop, small inductivity) and mechanic (small deformation, low stresses) functionality. Pressure drop along the suction path was reduced by 20%. The sound emission of the new radial piston pump generation was reduced by up to 5dB(A) in sound power that corresponds to a reduction of wide more than 50%. A new stroke ring design eliminates a possible place of wear. The DCP (Digital Interface Pump) is a new servo radial piston pump adjustment based on a new pilot valve with digital onboard electronics offering an enhanced functionality. |
|
|
| Moog introduces new radial piston pump (RKP) with digital control |
04 January 2005 - Moog Controls
Moog is introducing a new version of its popular Radial Piston Pump (RKP) with digital control and a fieldbus interface. In injection moulding machines, the digital version of the RKP pump will enable machine builders to enjoy advanced diagnostics and easy set-up. |
|
|
| New 4 channel 400 point modular parison controller with advanced software platform for Moog |
20 October 2004 - Moog Controls
Moog is introducing its new 4 Channel 400 Point Modular Parison Controller with an advanced software platform. The new controller allows blow molding machine manufacturers to control multiple heads and more points with less material consumption and reduced scrap. |
|
|
| FlightSafety International, Inc. selects Moog Inc. as its motion base supplier |
01 December 2003 - Moog Controls
FlightSafety International, Inc., has selected Moog Inc. to provide the electric motion bases and electro-mechanical actuators for its flight simulators. Moog is the designated supplier for the 60 in. stroke 6 Degrees of Freedom motion bases and electric control loading actuators. |
|
|
| Moog's explosion-proof servovalves and servo-proportional valves receive ATEX and FM certifications |
01 June 2003 - Moog Controls
ATEX Certification for servo and servo-proportional valves used in explosion-proof environments is obligatory from 1 June 2003 in the European Union. Moog has also received FM certification (Class 1, Division 1, Group B, C, D) for the D633K and D634K Direct Drive Valve Series. FM Certification is used in the USA for explosion-proof environments. |
|
|
| Moog previews electric, hydraulic and combined solutions |
19 May 2003 - Moog Controls
Moog Inc., Industrial Controls Division, will exhibit new motion control products and systems featuring electric, hydraulic and combined hydraulic-electric technologies at the National Plastics Exhibition 2003. |
|
|
| Moog Inc., Whittaker Controls enter into teaming agreement for development, sales of gas turbine controls |
13 May 2002 - Moog Controls
Moog Inc., Industrial Controls Division, and Whittaker Controls Inc. jointly announced today that they have entered into a Teaming Agreement in order to maximize their penetration in the industrial gas turbine market. |
|
|
| Design News selects Moog's new digital interface valve as best fluid power product of 2001 |
03 December 2001 - Moog Controls
Moog’s Digital Interface Valve was selected as a winner by an independent panel of judges reviewing products in the fluid power industry for 'ingenuity and innovation.' Winners were selected in six other industrial categories as well and are all featured in the December 3, 2001, issue of Design News. |
|
|
| Moog to preview new electric and hydraulic system solutions at Fabtech International |
05 November 2001 - Moog Controls
Moog Inc., Industrial Controls Division, will present a working demonstration of precise electric and hydraulic motion control systems for metal forming applications at Booth #21081, Fabtech International 2001, Chicago, November 11-14, 2001. |
|
|
| Moog to provide service, spares & maintenance for McFadden systems hydraulic motion simulators |
08 November 2000 - Moog Controls
We are pleased to announce that Moog Inc. of East Aurora, New York will now be providing factory-authorized service, spares, and long-term maintenance agreements for owners and operators of McFadden Systems’ complete line of high-performance hydraulic motion simulators. |
|
|
| Moog introduces new value-priced brushless servomotors |
03 October 2000 - Moog Controls
Moog Inc., Industrial Controls Division, introduced the G330 Series Brushless Servomotor, a value-priced family of brushless motors that deliver high-performance servocontrol, simplify machine design and improve system costs. |
|
|
| Moog to preview new machine-control concepts |
27 March 2000 - Moog Controls
Moog’s new machine-control technologies, which will be exhibited through live demonstrations and static displays at NPE Booth No. #1468, are designed to provide precise machine control, reduce system costs and save energy. Distributed intelligence at the component level is an integral part of Moog’s control concepts. |
|
|
| Moog introduces new digital servodrive |
27 February 2000 - Moog Controls
Moog Inc., Industrial Controls Division, has introduced the L180 Series Digital Servo Drive, a compact servo drive that not only delivers high-performance servo control but also simplifies installation and reduces system costs. |
|
