 |
| Material solutions for ESD bins and boxes |
26 November 2006 - Premix Oy
Premix offers a range of materials to meet the different surface resistance requirements in injection moulded ESD bins and boxes. |
|
|
| PRE-ELEC ESD grades now also food approved |
26 November 2006 - Premix Oy
PRE-ELEC ESD compounds have now also been evaluated by comparing their properties to the requirements of the German Foodstuffs and Consumer Goods Act. They meet BgVV’s requirements on cleanliness and can be used in direct contact with dry, moist or fatty foodstuff. This opens up totally new applications for example in the pharmaceutical industry and agriculture. |
|
|
| ESD Masterbatch for extrusion and blow molding of PE-HD/MD |
25 November 2006 - Premix Oy
Premix Oy has developed a new ESD masterbatch for extruded sheets and blow moulded bottles and canisters made out of PE-HD/MD to reach surface resistance value of even down to 2x10E10 ohm |
|
|
| Premix introduces unique new conductive compounds for ESD and EMI applications |
25 November 2006 - Premix Oy
Premix has recently extended its range of conductive compounds to cover also novel Inherently dissipative polymer compounds for use in clean room applications meeting the new ESD standards. The new PRE-ELEC ESD grades are washable, reusable, recyclable and colourable with surface resistance values permanently between 10e8 to 10e9 ohms. Since they do not contain carbon black, metals or antistatic additives, they are non-sloughing, low outgassing and low extractable plastics. The PRE-ELEC family of ESD compounds is currently available in PP, PE, ABS, PETG and PC/ABS. They can be processed with standard extrusion and injection moulding equipment. |
|
|
| Premix has recently launched a new HIPS based static dissipative compound, PRE-ELEC ESD 6100 |
24 November 2006 - Premix Oy
The new material is easy to injection mould and co-extrude due to a high melt flow index (200 °C/5 kg = 5 g/10 min). |
|
|
| ESD Masterbatch for extrusion and blow molding of PE-HD/MD |
24 November 2006 - Premix Oy
Premix Oy has developed a new ESD masterbatch for extruded sheets and blow moulded bottles and canisters made out of PE-HD/MD to reach surface resistance value of even down to 2x1010Ω |
|
|
| Latest developments in PRE-ELEC conductive compounds |
23 November 2006 - Premix Oy
PRE-ELEC ABS 1410
for chip carrier tape production. It can also be used for extrusion of mono- and multi-layer sheets for thermoforming. In addition to that, typical examples of use include injection moulded technical pieces. |
|
|
| Great cost savings with PRESEAL thermoplastic EMI gaskets |
22 November 2006 - Premix Oy
EMI gaskets are predominantly used in cellular phones and their base stations. Silicone based materials dominate the market today. While providing good material properties the silicone based gaskets have certain limitations and drawbacks especially in regard to mass production friendliness. The PRESEAL thermoplastic gaskets offer huge possibilities in simplifying gasket manufacturing and assembling. |
|
|
| PRE-ELEC ESD dissipative compounds are now offered in wider variety |
21 November 2006 - Premix Oy
PRE-ELEC ESD 5200
PP based grade for fulfilling the cleanliness requirements (NVR, out gassing and ionics). |
|
|
| Premix opens first North American compounding facility |
20 November 2006 - Premix Oy
Premix Thermoplastics, Inc. a specialty compounder of electrically conductive thermoplastics, announces the opening of its first North American manufacturing facility in Milton WI. Premix Thermoplastics is a wholly owned subsidiary of Premix Oy of Finland, a leader in conductive plastics technology in Europe. The 25,000 sq. ft. facility will have three compounding lines in operation by the end of 2003 with a capacity of over 5,000,000 lbs. In addition to production, the facility will also have development and sampling capabilities with a complete test laboratory. |
|
|
| Premix Rajamäki plant certified to ISO 9001:2000 Premix Rajamäki plant certified to ISO 9001:2000 |
19 November 2006 - Premix Oy
Premix Oy plant in Rajamaki, Finland, has been certified to the ISO 9001:2000 international quality management system standards. |
|
|
| New polyacetal based conductive and dissipative compounds |
18 November 2006 - Premix Oy
Premix announces the addition of a full line of conductive and static dissipative compounds to the company's PRE-ELEC product portfolio. Based on copolymer polyacetal with carbon black or carbon fiber for conductive (<1x10e5 ohm) compounds and inherently dissipative polymer (IDP.s) alloys for static dissipative (1x10e8 to 1x10e11 ohm) compounds. |
|
|
| New conductive and dissipative compounds based on copolymer polyacetal |
17 November 2006 - Premix Oy
PREMIX OY has introduced a full line of conductive and static dissipative compounds based on copolymer polyacetal. These compounds offer the excellent chemical resistance, toughness and low coefficient of friction of polyacetal while providing ESD protection. The new compounds are colorable and available with or without glass-fiber reinforcement. |
|
|
| Static dissipative 105-109 ohms PP and HD-PE plastics for injection molding |
16 November 2006 - Premix Oy
Premix has developed two new economical dissipative grades PRE-ELEC PP 1395 and PRE-ELEC PE 1295 for pallets, boxes and crates. PRE-ELEC PP 1395 and PRE-ELEC PE 1295 have controlled and permanent surface resistance values between 105 and 109 ohms. Both grades have high rigidity, excellent impact strength even in cold conditions, and are easy to process. These grades have been developed to meet new standards in ATEX environment, automotive and electronics industries. |
|
|
| Conductive and dissipative PP plastics for tapes in woven products |
15 November 2006 - Premix Oy
Premix launches PRE-ELEC PP 1396 and PRE-ELEC ESD 5400 for PP tape used in woven fabrics. PRE-ELEC PP 1396 and PRE-ELEC ESD 5400 are easy to process and have good electrical and mechanical properties after stretching. These grades together with our existing ones are suitable for both mono- and co-extrusion. |
|
|
| Premix introduces EMI shielding compounds |
14 November 2006 - Premix Oy
Premix Thermoplastics, a custom compounder of electrically conductive thermoplastic compounds, has developed a complete line of EMI shielding compounds for electronic enclosures called PRE-ELEC EMI. These compounds were developed to complement Premix’s PRESEAL product line. This gives Premix a complete line of EMI shielding compounds for the complete enclosure. |
|
|
| New PRESEAL Elastomers, Next generation EMI shielding |
13 November 2006 - Premix Oy
Premix Oy has released new PRESEAL Thermoplastic Elastomers for EMI shielding applications. These innovative products PRESEAL TPE 5020 and PRESEAL TPE 6080 have significantly improved mechanical and electrical properties. The new PRESEAL elastomers have also a further enhanced adhesion to even Polyamides and Polycarbonates and with no primer to Aluminium and Stainless Steel. Fewer process steps and faster cycle times leads to cost savings. These next generation raw materials are injection mouldable and extrudable by using conventional thermoplastic machinery. |
|
|
| New Non Carbon black based permanent static dissipative plastics |
02 November 2006 - Premix Oy
Premix Thermoplastics Inc, a leading international producer of conductive compounds, introduces a new line of washable, reusable, recyclable, colorable and clean room compatible inherently static dissipative polymers with resistance values permanently 10e8 to 10e9 ohms. |
|
