Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

AMODEL polyphthalamide helps low-coolant sensor survive harsh operating environment

Solvay Advanced Polymers Llc : 03 November, 2003  (New Product)
A new low-coolant sensor from Entratech Systems of Sandusky, Ohio is designed to be located in the radiators of trucks, off-road vehicles, and marine equipment. The housing of the sensor is molded of AMODEL AS-1933 HS polyphthalamide resin from Solvay Advanced Polymers, L.L.C.
Unique design, unique material
Conventional sensors send a continuous current path through a metal probe tip immersed in the coolant. The hybrid organic-acid technology used in new long-life engine coolants, however, can corrode the probe through the action of electrolysis.
Richardson’s design uses a proprietary AC type of signal sent through a stainless steel probe. The sensor incorporates special circuitry with an on-board microchip to process the signal from the coolant. A connecting wire to an indicator lamp or other warning device alerts the equipment operator to a low-coolant situation. The circuit can be interfaced to engine computers, it performs a power-up self test, and it features a time delay to prevent false alarms caused by sloshing of coolant in normal peration.

The unit’s stainless steel probe is insert molded into a housing that features integral threads for mounting the sensor into the coolant through a threaded hole in a radiator or expansion tank. A composite design was needed to insulate the probe from a metal tank. Richardson specified the AMODEL material because it is able to retain its dimensional stability at the elevated temperatures encountered in a vehicle cooling system, preventing leaks at the sensor’s installation site.

Operating performance and processing ease
AMODEL AS-1933 HS grade of polyphthalamide was developed specifically for improved performance in automotive cooling system environments. This material exceeds industry performance requirements even when tested at temperatures as high as 135°C (275°F). It also resists degradation or dimensional change after prolonged exposure to conventional glycol or long-life HOAT coolants.

This glass-reinforced grade can be readily processed using conventional equipment and methods. Entratech molds its housing on a press that has cartridge heaters in each mold half. Richardson says, “the material runs well, and we have not experienced any instances of incomplete mold fill.” Maximum part density was established through experimentation and programmed into the molding machine computer.

In final assembly, the probe is attached to the circuit board by a threaded stud, and the board is encapsulated in a two-part epoxy potting resin. Power, ground, and signal wires exit the potting for appropriate attachment to a vehicle’s electrical system.

About Solvay Advanced Polymers Solvay Advanced Polymers, L.L.C. is a subsidiary of Solvay America, Inc., the U.S. holding company of Solvay S.A. The company produces high-performance polymers that are used in a wide range of demanding applications in the automotive, aerospace, industrial, foodservice, medical and electronics industries worldwide. Solvay Advanced Polymers products include the IXEF polyarylamide and PRIMEF polyphenylene sulfide product lines of Solvay S.A. combined with a portfolio of materials that had comprised BP Amoco's engineering resins business.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo