Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Carbon nanotubes offer promise as components in devices even smaller than those available today

Duke University Pratt School Of Engineering : 14 January, 2007  (Technical Article)
Duke University researchers exploring ways to build ultrasmall electronic devices out of atom-thick carbon cylinders have incorporated one of these 'carbon nanotubes' into a new kind of field effect transistor. The Duke investigators also reported new insights into their previously published technique for growing nanotubes in straight structures as long as half an inch.
Field effect transistors, among the workhorse devices of microelectronics technology, are tiny switches in which the passage of electric current between a 'source' and a 'drain' is controlled by an electric field in a middle component called a 'gate.'

Carbon nanotubes, so named because of their billionths-of-a-meter dimensions ('nano' means billionths), combine exceptional strength, minuscule size and flexible electronic properties. They can behave either like conducting metals or like semiconductors, depending on how carbon atoms are arranged on their walls. As a result, they offer great promise as components in electronic devices even smaller than those available today.

The Duke research group headed by Liu is among a number that have incorporated a semiconducting nanotube as a component in an experimental field effect transistor. The nanotube is grown on a surface of silicon dioxide with metal electrodes evaporated on the nanotube's surface serving as the device's electron source and drain. Meanwhile, a layer of silicon fabricated under the silicon dioxide serves as the transistor's gate, also called a 'back gate.'

However, other groups have found that this back gate of silicon, which is 'doped' with other chemicals to fine-tune its electronic properties, is poorly coupled with the rest of the device. The result is excess power demand. 'To turn the device from off to on, you need five to ten volts,' Liu said in an interview.

To address this shortcoming, teams at two other universities have found they can reduce the power demand to between 0.3 and 0.5 volts by adding an additional gate made of a tiny droplet of salty water.

'That's an order of magnitude of difference,' Liu said of what he termed a 'water gate.' But 'the disadvantage is that water is a liquid. So we looked for a way of replacing this water droplet with something that has similar properties but is a solid.'

In a new paper in the research journal Nanoletters, Liu, graduate students Chenguang Lu and Qiang Fu, and research associate Shaoming Huang describe substituting a special polymer that has been developed for dry lithium battery technology.

This substitute compound, called lithium perchlorate/polyethylene oxide, 'can achieve similarly good device performance and avoid the problem of using liquid in the device,' the Duke authors wrote in their paper. This PEO 'polymer gate' is placed directly over the carbon nanotube.

Liu's team found the polymer gate's electronic properties can also be more easily fine-tuned to control the direction of the electric current by doping the underlying nanotube with other small carbon-containing molecules.

Doping silicon-based semiconductors in that way requires fabricators to precisely incorporate chemicals into those materials' internal crystal structures. 'For a nanotube, you just coat it on the surface, which is a lot easier,' Liu said.

In previous methods of using this chemical vapor deposition process to grow nanotubes, the tubes extend along a surface of silicon dioxide. In the process, they encounter 'physical resistance caused by the friction of bumping into other surface features,' he explained. 'That stops the growth of the nanotubes.'

But quick-heating in the flowing gas makes the incipient nanotube lift up slightly above the surface as it begins to grow, he said. The growing nanotube follows the direction of the gas and stays slightly suspended, thus avoiding interacting with surface that is rough at molecular dimensions. 'It's like flying a kite,' he added.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo