|
| Register for our Free Newsletters |
|
 |
|
|
|
|
|
|
|
|
| Other Carouselweb publications |
|
|
|
|
|
|
|
|
|
|
| |
| |
|
|
|
|
|
|
|
|
Digital vibration measurement in production environments
|
|
POLYTEC GMBH
: 11 August, 2003 (New Product) |
|
The new Polytec Industrial Vibration Sensor (IVS-300) is an integrated single box
vibrometer, specifically developed for non-contact vibration measurement in
production test applications. It features a robust and compact design, sealed according to IP-64 standard to cope with the challenges of harsh industrial areas. The IVS-300 exploits the latest digital signal processing techniques to ensure accurate and repeatable
measurement from uncooperative surfaces. |
|
The new Polytec Industrial Vibration Sensor (IVS-300) is an integrated single box
vibrometer, specifically developed for non-contact vibration measurement in
production test applications.
It features a robust and compact design, sealed according to IP-64 standard to
cope with the challenges of harsh industrial areas. The IVS-300 exploits the latest
digital signal processing techniques to ensure accurate and repeatable
measurement from uncooperative surfaces.
The IVS-300 features:
• 0.5 Hz to 22 kHz frequency response (highly linear)
• Velocity up to ± 500 mm/s (3 ranges for best resolution)
• Advanced digital signal electronics for lowest noise/highest sensitivity
The IVS-300 is the first choice for non-contact measurement on 'difficult'
surfaces with poor light scattering characteristics and for the resolution of low
vibration amplitudes requiring high resolution. All range and filter settings are
software configured via a serial interface, leaving no risk of accidental changes in
key settings on the production line. Vibration signal output is via an analog (± 4V
BNC), or digital audio interface (SP-DIF). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
