Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Enhanced machineability stainless steel hollow bar available in bigger sizes

Sandvik Coromant UK : 16 August, 2004  (New Product)
Enhanced machinability stainless steel hollow bar for makers of valves, pumps and so on - and available in over 100 different sizes - is now stocked by Sandvik Materials Technology UK in sizes up to 420mm outside diameter.
Sandvik Materials Technology has expanded its manufacturing and stock programme for enhanced machinability stainless steel hollow bar to include sizes up to 420mm outside diameter. It means that Sandvik now has a range of over 100 different hollow bar sizes, many of which can be supplied from stock.

The new sizes have all the improved machinability benefits of the Sanmac family of stainless steels without jeopardising key properties such as corrosion resistance and mechanical strength. They are aimed particularly at producers of mechanical components used in the manufacture of valves, pumps, flow meters, fittings, flanges and mechanical seals for the process industries.

Previously available in a size range from 30mm up to 250mm outside diameter, the new extended range has 6 new sizes from 300mm OD x 200mm ID up to 420 OD x 300mm ID in lengths from 3.5 to 5 metres, produced in stainless steel grades Sanmac 304L and Sanmac 316L and available from stock. All hollow bar sizes can be supplied cut to length if required.

The Sanmac family of stainless machining steels is the result of extensive research and process development by Sandvik Materials Technology to improve machinability. They are produced with the optimum chemical composition, optimised non-metallic inclusions and closely controlled production and process parameters.

Working in close co-operation with sister company, Sandvik Coromant - manufacturer of cemented carbide cutting tools and tooling systems - Sandvik's Sanmac stainless steels are designed to reduce machine tool wear, increase cutting speeds, improve productivity and obtain significant cost reductions per produced component.

As well as the range of hollow bar, Sandvik manufactures Sanmac round bar in sizes from 20mm up to 500mm, in a range of stainless and duplex stainless steel grades. Supplied peel turned or peel turned and polished, Sanmac bar is available in lengths of 3 to 7m, depending on diameter, and is produced in accordance with all relevant international standards.

The key benefit of buying Sandvik's Sanmac products is that support extends beyond the supply of materials. When required, all products can be supported with technical advice on the selection of material grades, recommended tool inserts and cutting data for a range of machining applications.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo