Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Lantek ends 2010 with a 34% increase in turnover

Lantek : 22 March, 2011  (Company News)
Lantek, specialising in the development and marketing of integrated CAD/CAM and ERP solutions for the sheet metal sector, recently held its annual conference in which the 2010 results were presented, as well as the corporate strategy for 2011. In 2010, Lantek saw a 34% increase in turnover, (10.58 million euros). This figure exceeded the forecasts for the year and illustrates the recovery of any ground lost the previous year due to the worldwide financial crisis and the particular difficulties faced by the sheet metal sector. This
Once again, most of the turnover (84%) came from the international market, the greatest growth taking place in China, South Korea, the United States and Brazil.

The 2011 forecast is for a further 30% growth, supported by a new, three-year strategy, which will see the management of each region moving to a local level.

The conference was attended by the company’s Board of Directors, as well as the senior managers from its network of offices located in 17 countries, worldwide. Lantek emphasised its continued leadership in the metal processing industry and outlined plans to consolidate its presence in those markets where it has recently started up new operations. The company will also continue with its commitment to emerging markets.

The increase in business was also reflected in how many clients the company has, with 1,100 new ones this year, meaning that the firm’s client base now totals more than 11,000 companies all over the world.

Of the total turnover achieved by Lantek in 2010, 84% corresponds to the business generated by the international markets as a whole, whilst 16% came from the domestic market. This shows a slight variation compared with 2009, when the proportion was 80% and 20%, respectively. This clearly illustrates how important the foreign market is for the company, and is in line with its policy for international expansion, as well as its long-held commitment to emerging markets.

The countries in which Lantek saw most growth in 2010 were China, South Korea, the United States and Brazil. The traditional European markets continue to be an important source of business, although the market growth in Asia and America is increasingly significant.

In terms of areas of business, the performance of the Management Software division has been outstanding. Lantek Integra, a solution launched in 2010, and the new vertical applications like Lantek Steelworks for the structural sector have already been well received by the market. Overall, Lantek’s ERP solutions doubled their turnover in 2010, accounting for close to 10% of the company’s total turnover, growth that is in line with the 20% estimated for the end of 2013.

Furthermore, in 2010 Lantek continued with its policy of investing in R&D&i, spending 20% of total turnover on it, the same as in 2009. This saw, among other things, the development of new and innovative solutions, such as Lantek Steelworks; re-engineering and technical and functional improvements to its current portfolio of solutions; and analysis and detection of new trends in the market.

“At Lantek we are very satisfied with the results we obtained in 2010, having continued with our policy of double-digit growth. In spite of it being a year full of challenges, marked by the economic crisis, we have shown how well we operate by meeting our initial targets, both the strategically and financially ”, explained Alberto Martínez, Managing Director of Lantek Sheet Metal Solutions.

“In 2010 we strengthened our product portfolio with the introduction of new technologies and solutions, such as the Lantek Integra ERP and its specialist solutions for the metal structures sector. We also worked to ensure that all our applications can be perfectly integrated with each other, offering our clients more flexible, higher quality products”, continued Sr. Martínez. “Another priority was to strengthen and consolidate our position in the emerging markets, through setting up operations in other regions, and by reinforcing our strategy for international growth. We believe this is laying the foundations for the future”.

The positive 2010 results and the excellent response from the international market have encouraged Lantek to set some optimistic targets for 2011; hence the company’s forecasts are for turnover to continue down the road of double-digit growth, with a 30% rise.

Lantek has, therefore, announced the start of its new strategic plan for 2011-2013, which incorporates changes at the organisational level. In general terms, this is based on the maxim “think global, act local”. To achieve this, Lantek is adopting a more horizontal organisational structure, with more localised management in the countries in which it operates, recognising the substantial differences between the markets in Europe and those in Asia or America.

“This new structure will enable us to deliver better cover to deal with the needs of each region”, pointed out Sr. Martínez. He continued: “Until now we have pursued a strategy of international development, managed from our headquarters in Spain.
This has enabled us to obtain good results but, market analyses and development show that we should now be looking at a global strategy. This means we can set general targets and policies, by allowing management autonomy for each geographical location. We want to progress from being an international company to being one on a global scale”.

Another of the key elements in Lantek’s plans for 2011 is for the company to become a multinational supplier of integrated solutions, thus generating higher levels of income than can be achieved by selling licences alone. Lantek is, aiming to be customers’ preferred option, and offer not only next generation products and services, but also provide integrated solutions with high added value. To achieve this, the company will continue working on the development and innovation of the two ranges of solutions it now offers to metal and sheet metal processing companies. These are its CAD/CAM products, which include Lantek Expert,
Lantek Flex3d and Lantek Manager; and its management products, consisting of Lantek Integra and Lantek Steelworks. Developing the OEM segment is also a key element of this new strategic plan.

For 2011-2013, Lantek plans to focus its efforts and resources on specific regions (Germany, France, Italy, South Korea, United States, and China) where it will aim to strengthen and boost its growth. Lantek also plans to consolidate its position in other countries and regions - the Middle East, Poland, Mexico, Turkey, Southeast Asia and Russia, which will all be of crucial importance during this period.

Finally, the company plans to place greater emphasis on the additional services it provides, and will develop them so that they become one of the core elements in terms of value offered to customers, enabling Lantek to become a global solutions provider.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo