|
| Register for our Free Newsletters |
|
 |
|
|
|
|
|
|
|
|
| Other Carouselweb publications |
|
|
|
|
|
|
|
|
|
|
| |
| |
|
|
|
|
|
|
|
|
Low cost introduction to Oxy-Fuel and Plasma Cutting
|
|
ESAB Group
: 10 January, 2003 (Company News) |
|
|
The new low cost Ultrarex UXL-P can be used for many different cutting tasks and provides features and benefits normally associated with more expensive cutting machine technology. It can be used as a high speed plasma machine or alternatively for single or twin head oxy-fuel applications. The combined machine offers high versatility at an economical cost with cutting thicknesses of 100mm achievable with oxy-fuel cutting. For plasma, various systems up to 100 A can be supplied to suit varied cutting requirements. The Ultrarex UXL-P has a cutting width of up to 2,000 mm with two torches and a high speed cutting capability. |
|
The new low cost Ultrarex UXL-P can be used for many different cutting tasks and provides features and benefits normally associated with more expensive cutting machine technology. It can be used as a high speed plasma machine or alternatively for single or twin head oxy-fuel applications. The combined machine offers high versatility at an economical cost with cutting thicknesses of 100mm achievable with oxy-fuel cutting. For plasma, various systems up to 100 A can be supplied to suit varied cutting requirements. The Ultrarex UXL-P has a cutting width of up to 2,000 mm with two torches and a high speed cutting capability.
The Ultrarex UXL-P provides the fabricators with the opportunity to carry out a variety of work in-house thanks to its versatility, reducing outside sub-contract cutting. Increased productivity is offered by the Ultrarex UXL-P by fully automatic cutting cycles for both plasma and oxy-fuel cutting. This is achieved by including systems for automatic ignition, automatic height control and automatic piercing. The cutting processes have been integrated into the machine design. A full oxy-fuel gas distribution system, including a set of solenoids, ensures reliable automatic hole piercing.
Accuracy is a key benefit of the Ultrarex UXL-P and the transverse linear guiding system gives the highest accuracy throughout the entire cutting area. Associated ESAB numerical controls guarantee efficient job preparation. A library with 65 fixed programs is supplied as standard. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
