|
| Register for our Free Newsletters |
|
 |
|
|
|
|
|
|
|
|
| Other Carouselweb publications |
|
|
|
|
|
|
|
|
|
|
| |
| |
|
|
|
|
|
|
|
|
MAG wire for all welding applications
|
|
ESAB Group
: 18 October, 2000 (Application Story) |
|
|
The latest full range of MAG wire available from ESAB is fully conformant with appropriate European and American standards and is quality controlled to ISO 9002. |
|
The latest full range of MAG wire available from ESAB is fully conformant with appropriate European and American standards and is quality controlled to ISO 9002.
OK Autrod 12.51 is a copper-coated SG2 wire, available in 0.8mm random wound and 1.0mm and 1.2mm layer wound. All three sizes are supplied on 15kg wire baskets and in use exhibit good arc stability due to the uniform copper coating achieved during the wire's manufacture.
OK Autrod 12.50 is a non-coppered SG2 wire available on 15kg wire baskets in random and layer wound as in OK Autrod 12.51. Operating benefits include excellent performance at high currents and low ecological impact. Arc stability during welding is a key factor with this wire.
OK Autrod 12.64 is copper-coated to EN440: G4S11 (equivalent to DIN SG3) and exhibits enhanced weldability.
Both 12.50 and 12.64 are available in the same sizes and wind configurations as the 12.51. Importantly, all are available in the unique ESAB octagonal Marathon Pacs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
