Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Nanorod composite can self-regenerate when damaged

University Of Pittsburgh Swanson School Of Engineering : 02 December, 2013  (Technical Article)
Using a newly developed computational approach, a nanocomposite is designed that enables self-regeneration of the gel matrix when a significant portion of the material is severed. The cut instigates a "dynamic cascade" of cooperative events, leading to regrowth: nanorods congregate at the new interface and initiate atom transfer radical polymerisation with monomers and cross-linkers in the outer solution. The reaction propagates to form a new cross-linked gel, which can be tuned to resemble the uncut material.
Nanorod composite can self-regenerate when damaged
When a chair leg breaks or a cell phone shatters, either must be repaired or replaced. But what if these materials could be programmed to regenerate-themselves, replenishing the damaged or missing components, and thereby extend their lifetime and reduce the need for costly repairs? 
 
That potential is now possible, according to researchers at the University of Pittsburgh Swanson School of Engineering, who have developed computational models to design a new polymer gel that would enable complex materials to regenerate themselves. 
 
“This is one of the holy grails of materials science,” noted principal investigator Dr Anna C Balazs. “While others have developed materials that can mend small defects, there is no published research regarding systems that can regenerate bulk sections of a severed material. This has a tremendous impact on sustainability because you could potentially extend the lifetime of a material by giving it the ability to regrow when damaged.”
 
The research team was inspired by biological processes in species such as amphibians, which can regenerate severed limbs. This type of tissue regeneration is guided by three critical instruction sets – initiation, propagation, and termination – which Balazs describes as a “beautiful dynamic cascade” of biological events.
 
“When we looked at the biological processes behind tissue regeneration in amphibians, we considered how we would replicate that dynamic cascade within a synthetic material,” said Balazs. “We needed to develop a system that first would sense the removal of material and initiate regrowth, then propagate that growth until the material reached the desired size and then, self-terminate the process.”
 
“Our biggest challenge was to address the transport issue within a synthetic material,” said Balazs. “Biological organisms have circulatory systems to achieve mass transport of materials like blood cells, nutrients and genetic material. Synthetic materials don’t inherently possess such a system, so we needed something that acted like a sensor to initiate and control the process.”
 
The team developed a hybrid material of nanorods embedded in a polymer gel, which is surrounded by a solution containing monomers and cross-linkers (molecules that link one polymer chain to another) in order to replicate the dynamic cascade. When part of the gel is severed, the nanorods near the cut act as sensors and migrate to the new interface. The nanorods are approximately 10nm in thickness, about 10,000 times smaller than the diameter of a human hair.
 
The functionalised chains (“skirts”) on one end of these nanorods keeps them localised at the interface and the sites (“initiators”) along the surface of the rod trigger a polymerisation reaction with the monomer and cross-linkers in the outer solution. The computational models established guidelines to control the process so that the new gel behaves and appears like the gel it replaced, and to terminate the reaction so that the material would not grow out of control. 
 
“The most beautiful yet challenging part was designing the nanorods to serve multiple roles,” postdoctoral associate Dr Xin Yong. “In effect, they provide the perfect vehicle to trigger a synthetic dynamic cascade.”  
 
In the future, the researchers plan to improve the process and strengthen the bonds between the old and newly formed gels, and for this they were inspired by another nature metaphor, the giant sequoia tree. “One sequoia tree will have a shallow root system, but when they grow in numbers, the root systems intertwine to provide support and contribute to their tremendous growth,” explains Balazs. "Similarly, the skirts on the nanorods can provide additional strength to the regenerated material." The next generation of research would further optimise the process to grow multiple layers, creating more complex materials with multiple functions.
 
Edited by Andy Pye
 
Top: In the computer simulation, the composite is cut (far left) and the nanorods begin migration to the cut interface. In the third image, the polymerization from the rods surface and cross-linking initiates, culminating in the newly regrown gel 
Right: Animation of the Self-regenerating Composites 
 
19 November 2013, Nano Letters, American Chemical Society
 
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo