|
| Register for our Free Newsletters |
|
 |
|
|
|
|
|
|
|
|
| Other Carouselweb publications |
|
|
|
|
|
|
|
|
|
|
| |
| |
|
|
|
|
|
|
|
|
New addition to ESAB's origo family
|
|
ESAB Group
: 21 May, 2006 (New Product) |
|
|
New from ESAB, OrigoMag is the ideal welding machine for less complex welding jobs that still require high quality. OrigoMag C150, C170, C200 and C250 are step-regulated power sources for MIG/MAG welding. They are designed for light and medium duty applications. A built-in wire feeder and the low weight of the units make them ideal for farmers, repair shops and batch production users. |
|
New from ESAB, OrigoMag is the ideal welding machine for less complex welding jobs that still require high quality. OrigoMag C150, C170, C200 and C250 are step-regulated power sources for MIG/MAG welding. They are designed for light and medium duty applications. A built-in wire feeder and the low weight of the units make them ideal for farmers, repair shops and batch production users.
OrigoMag can be used with both solid wire and self-shielding cored wire. It is designed for welding of steel, stainless steel and aluminium. Wire diameters from 0.6mm up to 1.2mm can be used depending on the type of machine.
The Power Smoothing Device improves welding when CO2 or Ar/CO2 gas mixture is used. The units are equipped with multi-step voltage switches and potentiometers for wire speed adjusting to enable easy setting of welding parameters. It is possible to adjust burn-back time and to set spot welding time in C170/C200/C250. The units are fan-cooled and equipped with thermal overload protection. As an option, OrigoMag C170/200/250 can be equipped with V/A digital meter and transformer for CO2 heater.
Although OrigoMag C150/170/C 200/C250 are 1-ph units, Power Smoothing Device gives them excellent welding performance in CO2 and gas mixtures. Power Smoothing Device provides as smooth a welding current as for a 3-phase machines.
Each machine is equipped with a gas-cooled ESAB MX Torch (MXL 150v, MXL 200, MXL 270) and each has ergonomic handles. They have spring loaded contact pins in the central Connector, except for ESAB MXL 150v which is delivered with 2.5m and is connected directly to the power source.
Optimum cooling of the torches gives extended lifetime of the swan necks and the wear parts. Gas nozzles are available in three different versions – standard, straight and conical. This provides maximum flexibility and optimum lifetime.
For more information about ESAB's OrigoMag e-mail: [email protected] requesting Pulsed MIG Welding CD. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
