Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New electronic electricity meter called the DELTAsingle, aimed at commercial & industrial market

ABB Limited (Group Headquarters) : 10 July, 2006  (New Product)
At only 72mm in width, it can be installed in even the most confined locations. The DELTAsingle is designed to measure power consumption of sub-circuits of up to 80A, and can be placed on sub-distribution boards.
At only 72mm in width, it can be installed in even the most confined locations. The DELTAsingle is designed to measure power consumption of sub-circuits of up to 80A, and can be placed on sub-distribution boards.

The DELTAsingle has a number of interactive functions that enable it to be read in three different ways. The front of the meter has a 6mm high LCD display which shows 6 digits, so that readings are easy to record locally. The DELTAsingle can also emit a pulse output, which can be fed into a building management system. Power consumption can then be monitored by minute, hour, day or whatever is required. The meter readings can also be performed via an infra-red interface for serial communication, so that it can be read with a serial communications adapter over M-bus, RS232, TCP/IP, or LON.PL networks.

Should a power failure in a building occur, the meter is equipped with a 'Super Cap' power back-up facility that will run for 48 hours. A red LED at the front will flash to indicate how much of the battery's power has been consumed.

The DELTAsingle meter takes only seconds to install, with its DIN rail design and plug-and-play connections.

The DELTAsingle has been developed according to IEC standards 620520-11, 62053-21 and 620054-21, ensuring the highest quality measurement of electricity consumption.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo