Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New material grade for radiant and protection tubes for furnace applications.

Sandvik Coromant UK : 23 July, 2006  (New Product)
Heating specialists Kanthal, a product area of Sandvik Materials Technology, has introduced a new material grade for radiant and protection tubes for furnace applications.
Designated Kanthal APMT, the new iron-chromium-aluminium tube grade is a development of Kanthal’s Advanced Powder Metallurgy technology, which has been used successfully for many years in both gas and electrically heated furnaces. Used mainly in the heat treatment, steel and aluminium industries, Kanthal radiant and protection tubes combine strength and corrosion resistance with high temperature operation.

The key benefit of the new grade is improved hot strength, at temperatures up to 1250°C. This makes it suitable for use in demanding, horizontal radiant and protection tube applications, where form stability is needed and where sagging deformation may be a problem. As well as high strength, Kanthal APMT tubes have excellent, high temperature corrosion resistance.

The chemical composition of Kanthal APMT is slightly modified, compared to Kanthal APM. It has the same FeCrAl (iron-chromium-aluminium) base as Kanthal APM but with added molybdenum.

When heated, all Kanthal PM materials form an aluminium oxide that protects tubes from corrosion and therefore, extends service life. The surface oxide also provides good protection in carburising and sulphidising atmospheres. It is practically non-spalling which means that there is no scaling within the tube to contaminate the heating element or gas burner. Similarly, there is no scaling on the outside of the tube to affect goods in the furnace.

Compared to nickel-chrome and iron-nickel-chrome alloys, Kanthal PM materials have a higher loading potential. At a furnace temperature of 1000°C, the loading can be more than double. Fewer tubes are, therefore, needed for the same power rating. Kanthal PM tubes also offer a weight advantage, weighing less than the equivalent NiCr and FeNiCr tubes of the same dimension.

Produced by the extrusion process, the new Kanthal APMT tubes are available in a size range from 26.67mm up to 198mm outside diameter.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo