Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New sensors for force measurement in press-fit processes

Kistler Instruments : 26 January, 2007  (New Product)
The new ready-to-install piezoelectric force sensors complement the existing range of compression and tension elements, and optimize force measurement in press-fit processes with regard to price, simple adaptation, measuring range and compactness.
The new ready-to-install piezoelectric force sensors complement the existing range of compression and tension elements, and optimize force measurement in press-fit processes with regard to price, simple adaptation, measuring range and compactness.

Each of the five compact force sensors, Types 9313, 9323, 9333, 9343 and 9363 with measuring ranges of 5 kN, 20 kN, 50 kN, 70 kN and 120 kN, is supplied with three 100%, 10% and 1% measuring range calibrations.

There are flanges on the top and bottom of the type 9333, 9343 and 9363 that enable them to be easily and flexibly installed directly in presses, punches or rams. Very low, space-saving direct installation is achieved through one-sided mounting by means of four internal precision threads or by using the hexagonal slot screw with threaded insert supplied. If direct installation is not possible, the sensors can be mounted using a standard or custom adapter. High-precision coaxial installation, such as in presses, is possible using a double-sided centering seat. The sensor has a central hole which enables it to be used in combination with ejection tools. Sizes 9313 and 9323 are designed with a central blind tapped hole at both ends for mounting an axial shaft adapter.

If direct mounting is not possible, the sensors can be mounted using a standard or custom adapter. The lateral cable outlet is protected with a screw-on connector cap and is part of the accessories included. SCS calibration and calibration of additional measuring ranges are available as optional extras.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo