Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New two component nickel conductive epoxy adhesive

Master Bond : 08 February, 2006  (New Product)
Master Bond Inc. of Hackensack, New Jersey has developed a new two component, room temperature curing, nickel filled, electrically conductive epoxy adhesive called EP76M. EP76M has a convenient one to one mix ratio by weight or volume. It has a volume resistivity of 5-10 ohm-cm and excellent low outgassing properties. It has a thermal conductivity of 8-9 BTU/in/ft
Master Bond Inc. of Hackensack, New Jersey has developed a new two component, room temperature curing, nickel filled, electrically conductive epoxy adhesive called EP76M. EP76M has a convenient one to one mix ratio by weight or volume. It has a volume resistivity of 5-10 ohm-cm and excellent low outgassing properties. It has a thermal conductivity of 8-9 BTU/in/ft/hr/F. EP76M readily develops a tensile shear strength of 2,000 psi when measured and cured at room temperature.

Master Bond EP76M has superior durability, thermal shock and chemical resistance. It exhibits high bond strength to similar and dissimilar substrates. It has a coefficient of thermal expansion of 30 in/inx106/C. EP76M has a service operating temperature range of -60F to +250F. A higher temperature version called EP76MHT can resist up to 400F.

EP76M is easy to apply. Contact pressure is only required for cure. The adhesive spreads evenly and smoothly. It is 100% reactive and does not contain any diluents or solvents. Cures can be accelerated by the use of heat. Parts A and B are both colored gray. EP76M is available for use in glass jars and metal containers. They are packaged in small and larger sizes (pint and quart units) for convenient application.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo