Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New Vishay micro-measurements high-temperature weldable strain gages

Vishay Electronic : 04 February, 2004  (New Product)
Vishay Intertechnology, Inc. has released a new series of High-Temperature Weldable Strain Gages optimized for high-temperature testing applications, such as stress analysis, with a temperature rating up to 980
The new strain gages from Vishay Micro-Measurements are free-filament wire strain gages that have been pre-bonded to shim stock with flame-sprayed alumina. As a result, the new gages are easy to install in the field, especially on large structures, through welding to the test structure with a capacitive discharge spot welder such as Vishay's Model 700.

With a bonded wire design that resists fatigue, the new High-Temperature Weldable Strain Gages are an excellent choice for dynamic, impact, or vibratory strain measurements. While designed primarily for dynamic measurement applications, the active dummy method of temperature compensation can be used when static strain measurements are made.

The gages released today are available in four options, with a choice of Nichrome V or Pt8W sensor alloys and either of two types of pre-attached, high-temperature, insulated cable: M Series or F Series.

Gages with M Series leadwires consist of a free-filament gage bonded to a shim with an integral high-temperature cable with chromel/alumel wires. The new High-Temperature Weldable Strain Gages are best suited for high-temperature applications in which protection against moisture is not required; however, each M Series gage features a mineral-insulated, two-conductor cable with an Inconel metal jacket that offers excellent protection in harsh environments and a temperature rating up to 980 C [1800 F]. The ends of the gage are sealed to avoid moisture absorption during shipping or storage.

Gages with F Series leadwires consist of a free-filament gage bonded to a shim, a weldable transition terminal, and a high-temperature cable with chromel/alumel wire. A fiberglass-insulated, braided, two-conductor cable assembly is attached at the gage end through alumina insulators strapped to the terminal shim, providing a firm anchor for the cable at the gage end. The cable conductors are threaded through lengthwise holes in the alumina insulators and bonded to the insulators with high-strength ceramic cement to prevent wire movement at the gage-cable weld junction. The flexible fiberglass cable is rated to 650 C [1200 F] and provides reliable performance in installations where fraying due to vibration is not a concern.

All four gage configurations feature nominal resistance of 120 Ω, a sensor gage length of 0.25 in., a shim length of 0.50 in., and a shim width of 0.30 in.

Production quantities of the new strain gages are available now.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo