Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

New Vishay Siliconix battery charger IC works with all common battery types

Vishay Electronic : 23 March, 2001  (New Product)
A new microprocessor-controlled battery charger IC offering the industry's smallest footprint solution for this application, and eliminating the need for several external components, has been announced by Siliconix incorporated, an 80.4%-owned subsidiary of Vishay Intertechnology, Inc.
Offered in a small-outline TSSOP-16 package with a 1.2-mm height profile, the new Si9731DQ works with system microprocessor or microcontroller of cell phones, PDAs, and other handheld appliances to provide a complete, chemistry-independent battery charger solution.

The Si9731DQ uses two internal power MOSFETs to provide trickle charging or fast charging depending on battery voltage at the beginning of the charge cycle. If battery voltage is below 3.4 V, the Si9731DQ detects the voltage from an ac adapter and initiates trickle charging until the battery voltage reaches a sufficient level to wake up the system microprocessor. Once activated, the microprocessor disables trickle charging and enables PWM-controlled fast charging via the Si9731DQ. Both the trickle-charge and fast-charge MOSFET components of the Si9731DQ provide bidirectional current blocking on the off state, eliminating the need for an external Schottky diode.

For maximizing the charge capacity of lithium ion batteries, the Si9731DQ integrates a precision reference and error amplifier to provide constant-voltage-mode charging to a 4.1-V or 4.2-V termination with 50-mV accuracy.

Since it uses a pulse charging technique with short on-times and long off-times, power dissipation is kept to a minimum, but unlike any competing solution, no external inductor is required. The Si9731DQ typically draws just 1 mA of current in normal mode and a maximum of 1 mA of current in shutdown mode - an order of magnitude improvement over competing solutions.

Because the Si9731DQ is microprocessor controlled, it gives designers maximum flexibility - allowing the same IC to be used for lithium ion or nickel battery designs, different charger types, different charging algorithms, and different power management architectures. As for power efficiency, the closest competing solution draws eight times the current in normal mode and 12 times the current in shutdown mode.

The Si9731DQ can be used in conjunction with a regulated or unregulated external dc power source, including most low-cost wall adapters rated from 4.5 to 12 V.

Samples of the Si9731DQ are available now. Production quantities are available now with lead times of 10 to 12 weeks for larger orders.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo