Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Ocean-going acoustic sensor array to aid in national security, ocean research efforts

Boston University : 20 May, 2005  (Technical Article)
Jason Holmes, a mechanical engineering graduate student at Boston University and guest researcher at Woods Hole Oceanographic Institute, has devised a low-cost, highly sensitive array of underwater ears that is perking up interest in both homeland security and ocean research circles. Holmes
Holmes will present research on his underwater listening device in Vancouver on May 20 at the semi-annual meeting of the Acoustical Society of America.

The array combines sophisticated engineering with off-the-shelf hardware to create a relatively inexpensive but highly sensitive underwater listening device. The prototype comprises six underwater microphones, or hydrophones, spaced inside a 30-foot plastic tube filled with mineral oil. The array tube is filled with mineral oil to create neutral buoyancy, allowing the array to float behind the underwater towing vehicle.

Signals from the hydrophones are captured and stored on mini-disc recorders aboard the unpiloted submarine, which is called Remus. Designed by Woods Hole Oceanographic Institution, Remus looks like a small torpedo and can navigate autonomously underwater around obstacles and through harbors using GPS sensors, sonar, and electronic maps.

Listening arrays typically used by the military and ocean scientists are towed behind ships and are very long, the shortest being around 1,500 feet long, and are several inches in diameter. At 30 feet in length and 1.1 inches in diameter, the extremely compact prototype can easily be towed through the water by a small, quiet, battery-powered craft. The compact size of the towing sub and array make it easy for one or two people to launch the system, compared to the fully crewed ships required for conventional hydrophone systems.

Holmes originally developed the array to help him study how sound waves travel through shallow water, where sound is refracted by the bottom. Until recently, most acoustic ocean studies have been conducted in deep water, where the bottom has little effect on sound. Holmes constructed the hydrophone system to tackle the problem of how sound waves behave in shallow water, but the U.S. Navy saw the device as a potential security tool, one that is vastly less expensive than the multi-million dollar listening arrays currently in use. Parts for Holmes’ array cost a mere $4,000 and are available as off-the-shelf technology.

Holmes is now working with the military to further develop the array for underwater intelligence gathering. Holmes says his next project will comprise four underwater hydrophone arrays towed by a fleet of unpiloted subs that could travel up to 4 kilometers per trip. Holmes and his faculty advisor William Carey, a professor of aerospace and mechanical engineering in BU’s College of Engineering, say they envision a fleet of entirely autonomous listening subs will prowl the seas, returning to underwater recharging stations to upload their data and refresh their batteries.

“A lot of people were skeptical this would even work,” Carey says. “But the way Jason has designed this array, this will change the way ocean measurements are made.”

Faculty in the Department of Aerospace and Mechanical Engineering study issues in acoustics; fluid mechanics; dynamics, control, and mechatronic systems; micro- and nano-electromechanical systems; and the biomedical aspects and applications of mechanical engineering.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo