Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Online vibration monitoring using CSI 4500 Machinery Health Monitor prevents unexpected shutdowns

Emerson Process Management : 03 February, 2007  (New Product)
Using Emerson's CSI 4500 Machinery Health Monitor, Mondi Business Paper has significantly reduced the number of unexpected shutdowns at its mill in Richards Bay, South Africa.
Emerson Process Management has significantly reduced the number of unplanned shutdowns at Mondi Business Paper's Richards Bay (South Africa) mill using Emerson's CSI 4500 Machinery Health Monitor. The online system detects changes in fan behavior, alerting the operators and prompting a remedial response that prevents unexpected fan failures and boiler shutdown.

'In just seven months, Emerson's Machinery Health technologies have prevented seven incidents due to fan imbalance and early bearing defects that could have shut us down,' said Nico Groenewald, senior mechanical technician, Condition Monitoring. 'We estimate that the savings in lost revenue from these incidents would have been $542,118. Not only are we more productive, but this is a safer work place because of Emerson's predictive technologies.'

The uneven build-up of deposits on the runners of fans providing air to the recovery boilers changes the balance of these fans, causing numerous problems. Bearing failure on the primary and secondary air fans can result in a shutdown of the recovery boilers for at least six to eight hours. The cost of the recovery boiler being down is approximately $17,306 per hour, not including the cost of repairing damaged equipment.

Online monitoring using Emerson's CSI 4500 Machinery Health Monitor, a component of Emerson's PlantWeb digital plant architecture, provides a continuous flow of information on the condition of the fans and the operators are made immediately aware of any changes. The faulty fan can then be shut down for cleaning or repairs before failure occurs.

An additional benefit of the system is the ability to trend fan behaviour over time using Emerson's AMS Suite: Machinery Health Manager software. This enables the condition of assets to be remotely monitored using the Wide Area Network at the site. AMS Machinery Manager incorporates multiple diagnostic technologies into a common database and enables operators to correlate trends with changes in boiler condition. This information is useful in reducing incidents of deposit build-up on the fans. Knowledge of vibration behaviour over time can also be useful in the early detection of bearing problems and misalignment leading to failure. It can also be used as a quality control factor after maintenance interventions.

These fans were previously monitored as part of a routine vibration monitoring program, so sudden changes in vibration levels might go undetected for several days or until the next scheduled measurement. The additional loading/stress on fan bearings when running in an unbalanced condition for an extended period sometimes resulted in reduced bearing life along with the downtime and material costs associated with bearing failures. The unpredictable nature of the build-up on these fans also posed a potential safety hazard.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo