|
Register for our Free Newsletters |
|
 |
|
|
|
|
|
|
|
|
Other Carouselweb publications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quadrant Engineering Plastic Products extends unique range of Ketron Peek shapes with new black grade
|
Quadrant EPP
: 17 February, 2004 (New Product) |
|
Quadrant Engineering Plastic Products has added to its inventory a new, black polyetheretherketone. It is the latest addition to its unique range of these high-performance materials, which feature chemical- and stress-cracking resistance at elevated temperatures and long-term, high-mechanical strength. The new grade, Ketron PEEK 1000 Black, is ideal for machining critical components, where aesthetics are important. |
|
Quadrant Engineering Plastic Products has added to its inventory a new, black polyetheretherketone. It is the latest addition to its unique range of these high-performance materials, which feature chemical- and stress-cracking resistance at elevated temperatures and long-term, high-mechanical strength. The new grade, Ketron PEEK 1000 Black, is ideal for machining critical components, where aesthetics are important.
Ketron PEEK 1000 Black offers outstanding steam and wear resistance: products machined from it can be used continuously to 480°F (250°C) in hot water or steam without permanent loss in physical properties. The material has a continuous service temperature, in air, of 480° F (without load), and it has a V-O flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame. For hostile environments, Ketron PEEK is a high-strength alternative to fluoropolymers.
Other key features of Ketron PEEK 1000 Black include: Very low moisture-absorption; inherently good wear- and abrasion-resistance; and excellent chemical resistance. The material is resistant to weak acids, alkalies, ketones, ethers, esters (acetone), hydrocarbons, chlorinated solvents, alcohols, and inorganic salt solutions.
Typical properties of Ketron PEEK 1000 Black are:
Tensile strength: 16,000 psi;
Compressive strength: 20,000 psi;
Water absorption (after 24 hrs.): 0.1%.
Ketron PEEK 1000 Black is now available from stock in a broad range of rod diameters, with special sizes and shapes available on a make-to-order basis.
Ketron PEEK 1000 Black joins the other PEEK materials made by Quadrant EPP, which are: Ketron PEEK 1000 Natural, Ketron PEEK GF30 glass-fiber reinforced, Ketron PEEK CF carbon-fiber filled, Ketron PEEK HPV bearing grade and an all new static-dissipative grade called Semitron ESd 480. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|