Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Recycling to reduce Volvo's environmental footprint can give its old trucks a new lease of life

Volvo Trucks : 01 April, 2011  (New Product)
A truck straight off the factory assembly line may not be quite as new as it seems. One-third of the vehicle
At the Volvo Truck Center just outside Göteborg, trucks are dismantled down to their last nuts and bolts and their materials recycled.

The newly arrived truck will continue to be useful. Its best parts will be sold on the used vehicle market. All materials removed from the truck that cannot be sold will be put into containers marked separately for iron, aluminium, brass, copper, plastic, combustible and so on. All parts that are too worn out will be sent away for melting or incineration, to be re-used in the form of new products or district heating. Nothing goes to landfill.

Volvo Trucks works hard to reduce the company’s environmental footprint, and has applied a carefully thought-out recycling strategy since the mid-1990s.

“We have to consider the environment, our resources and future generations,” says Volvo Trucks’ environmental affairs director Lars Mårtensson. “What is more, there are sound financial reasons for the customer to recycle the truck. We try to aid that process as much as possible, for instance by providing detailed instructions with each truck on how it is to be recycled.”

Every Volvo truck is designed and built at the factory to take account of what will happen on the day the truck is withdrawn from service. “We tailor the technology needed for subsequent dismantling and recycling into the design and production of new trucks. For example, we use plastic rather than metal clips to attach wires and hoses, since metal clips take far longer to remove,” explains Mårtenssson.

The materials used are also carefully selected. “The challenge is to balance usage demands against recycling properties. For some purposes, plastics that can be melted down are more suitable than plastics that are incinerated, while for other purposes the opposite applies,” explains Mårtensson.

In terms of weight, roughly 50 percent of the wrought iron used in a new truck comes from recycled metal, while an impressive 97 percent of the cast iron is recycled metal. Since it takes less energy to manufacture products from recycled material than from new raw materials, the environmental gains are considerable. Moreover, recycling also has financial advantages. If, for instance, there is a shortage of certain metals and prices rise, recycling becomes even more important. At present, just over 90 percent of a scrapped Volvo truck is recycled. When a Volvo FH is scrapped, more than nine tonnes of various materials are recovered for recycling.

All dents and rusty panels are marked with a large yellow arrow and the truck’s ID number before the dismantled parts are placed in a container that is also marked with the vehicle’s ID number. Every single part that can be sold must be traceable back to the exact truck model, year of manufacture and production series.

It takes the team six to seven days to dismantle a truck and clean all the parts that are to be sold on. In all, the workshop takes in about 30 to 40 trucks a year.
Cabs older than ten years are seldom saved. Instead, they are melted down to make new metal components.

Draining off the refrigerant is perhaps the most important part of the whole dismantling operation, because it is so environmentally hazardous. The toxic-green glycol and engine oil drain off into two containers placed below the vehicle. All environmentally hazardous fluids are poured into sealed tanks that are put in the yard outside and will later be sent for destruction.

After the cab has been lifted off using a roof-mounted traversing crane, all its interior fittings are removed. Seats, steering wheel, wall and roof panelling and all electronic components are removed and sold individually, if they are in good enough condition. The rest is recycled.

After the cab, it is time for the gearbox to be removed, followed by the truck’s 12-litre engine. Gearboxes and rear axles are often sent for renovation, but engines are often regarded as too expensive to rebuild. Instead, they are cleaned thoroughly.

According to Volvo Trucks’ Environmental Product Declaration calculator, a recycled truck reduces carbon dioxide emissions by just over four tonnes. This is because it takes less energy to manufacture new products from recycled materials than from entirely new raw materials.

If a Euro 3 truck were replaced by a Euro 5 truck that consumes almost eight percent less fuel, particulate emissions would also be cut by 80 percent. Moreover, the more modern truck would also release 86 tonnes less carbon dioxide during its lifetime than its older counterpart.

This corresponds to more than 20 return air trips between Stockholm in Sweden and Bangkok. A trip of this kind is calculated to produce emissions corresponding to four tonnes of carbon dioxide equivalent. A carbon dioxide equivalent is a measurement of greenhouse gas emissions. This measurement takes account of the fact that different greenhouse gases have different greenhouse impacts, and specifies how much carbon dioxide can be emitted to produce the same climate impact as all the other greenhouse gases put together during the course of a given journey.

The Volvo Trucks Environmental Product Declaration calculator can be found at Volvotrucks.com:
http://www.volvotrucks.com/TRUCKS/GLOBAL/EN-GB/VALUES/ENVIRONMENT/FOOTPRINT_CALCULATION/Pages/Calculator.aspx
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo