Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Sandvik special steel resists 25 years of corrosion

Sandvik Coromant UK : 12 January, 2000  (Company News)
Stainless steel tubes from Sandvik Steel, specially developed by Sandvik's R & D department for use in critical process areas in the manufacture of urea, are still in operation after 25 years at the Indian Farmers Fertiliser Co-operative Limited (IFFCO) fertiliser manufacturing plant at Kalol in the state of Gujarat.
The tubes, manufactured from special steel grade Sandvik 2RE69, were installed in the 'stripper' which is the most aggressive part of the urea process, and typically therefore have a much shorter life.

In modern urea plants, urea is manufactured by a reaction of carbon dioxide (CO2) and ammonia (NH3) at high pressure and temperature. CO2 and NH3 are mixed in a reactor at 160-220atm and 170-190C where ammonium carbamate is formed. The ammonium carbamate is converted to urea and water in an endothermic reaction. Although urea in itself is not a very corrosive material, the intermediate ammonium carbamate is extremely corrosive. For this reason, special stainless steels have to be used in high pressure parts of the plant. To maintain stainless steels in a passive state, it is necessary to add oxygen to the process usually 0.4 0.6 vol% - in the CO2 feed.

Two main types of stainless steel have been developed by Sandvik for urea plants. The first, a standard austenitic grade of type 316L, modified with a high nickel content is widely used in plate form for lining the reactor. Called Sandvik 3R60 Urea Grade, it is also used for high pressure piping to connect different stages of the production process such as the reactor, condenser and stripper.

The second urea grade is Sandvik 2RE69, a special high chromium grade with a very low or zero ferritic content which passivates easily and sustains passivity. This alloy is more corrosion resistant than the modified 316L grade and a general corrosion rate of 0.12mm per year maximum can be guaranteed in the Huey test - a test widely used to reject material with unsatisfactory corrosion resistance.

There are two key players in the design of urea plants Stamicarbon in Holland and Snamprogetti in Italy.

The IFFCO plant has a Stamicarbon designed urea stripper using Sandvik's 2RE69 for the tubes with the tube sheets overlay welded with the corresponding overlay weld metal of type 25/22/2. Under normal service conditions the stripper corrosion rate is in the range 0.05-0.09mm per year at the upper part of the tubes which are exposed to the most severe conditions. A combination of high quality material and good process control by the operator are essential to achieve low corrosion rates and long service life. A 25 year life is therefore a remarkable performance. Subsequent installations in plants in India, China and Germany have enjoyed a comparably long life.

Further development of Sandvik materials for use in the stripper have seen the use of bimetallic tubes, replacing titanium tubes, in a new and patented method introduced by Snamprogetti. The bimetallic tubes consist of an outer tube in 2RE69 with an inner lining of Zirconium 702. Bimetallic tubes are fabricated with a mechanical bond between the two components ensuring good heat transfer. Zirconium has better corrosion and erosion properties than titanium in this application and is more easily fabricated.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo