Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Silver conductive epoxy adhesive has rapid set up time

Master Bond : 04 February, 2005  (New Product)
EP77M-F is a new, two component, silver filled, electrically conductive epoxy adhesive for high performance bonding. This compound has a low volume resistivity of 10-3 ohm-cm. It will set up in 5-10 minutes at room temperature, even when applied in very small amounts. Full cure usually takes 8-12 hours at room temperatures. Electrical conductivity develops rapidly and is first detectable within 30-60 minutes.
Master Bond Inc. of Hackensack, New Jersey has developed EP77M-F, a new, two component, silver filled, electrically conductive epoxy adhesive for high performance bonding. This compound has a low volume resistivity of 10-3 ohm-cm. It will set up in 5-10 minutes at room temperature, even when applied in very small amounts. Full cure usually takes 8-12 hours at room temperatures. Electrical conductivity develops rapidly and is first detectable within 30-60 minutes.

Master Bond EP77M-F has high bond strength to similar and dissimilar substrates. Adhesion to metals, glass, ceramics, vulcanized rubbers and most plastics is excellent. Bonds are resistant to thermal cycling and chemicals including water, oil and most organic solvents. EP77M-F has a wide service operating temperature range of 4K to +125C.

Unlike the majority of two part silver conductive epoxy systems, EP77M-F has a one to one mix ratio, by weight or volume. It can be applied with minimal sagging or dripping even on vertical surfaces. It is 100% reactive and does not contain any diluents or solvents. It has low outgassing properties.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo