Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Simple method may improve computer memory, catalysts, ceramic/metal seals, and nanodevices

DOE/Sandia National Laboratories : 12 December, 2006  (Technical Article)
A method that creates smooth and strong interfaces between metals and metal oxides without high-temperature brazing has been patented by researchers at the National Nuclear Security Administration
The method can improve magnetic random-access memories, which allow next-generation computers to boot up instantly yet retain their entire memories after power interruptions. Depositing flat, nanometer-thin crystalline and ferromagnetic metallic layers on similarly thin oxide layers increases strength, stability, and uniformity of the oxide-metal interface. This reduces manufacturing cost and requires less electricity to produce more rapid magnetic effects for the computer memory.

The inexpensive technique also may produce better, less expensive (more highly dispersed but stable) catalysts for chemical reactions, better ceramic/metal seals, and lead to improved nanodevices.

The method works by controlling the growth and interfacial strength of a metal deposited on an oxide layer. There are two distinct methods within the patent.

By fully hydroxylating the oxide surface and then cleansing it of impurities, a chemical reaction can oxidize a fraction of deposited metal atoms, incorporating them by strong ionic bonds into the oxide surface. However, these metal atoms also bind strongly to metallic atoms above them and serve as “anchors” to bind more metal. At sufficient concentration, laminar growth is achieved and crystallinity is observed by approximately six metal atomic layers. These findings are supported by both experimental and theoretical results.

Another method controls the wetting characteristics (that is, the layer-by-layer deposition) and increases adhesion between a metal and an oxide layer. By introducing or producing a sub-monolayer of negatively charged species (e.g., a fraction of hydroxyl-radical coverage) to the surface of an oxide layer, layer-by-layer growth of metal deposited onto the oxide surface is promoted. This increases the adhesion strength of the metal-oxide interface. The negatively charged species can either be deposited directly onto the oxide surface or in the form of a compound that dissociates on, or reacts with, the surface to form the negatively charged species. The deposited metal adatoms are thereby bound laterally to the negatively charged species as well as vertically to the oxide surface, binding them strongly to the surface of the oxide, while otherwise they are bound weakly. This method has also been demonstrated by experiment and supported by theory.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo