Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

Synthetic aperture radar may soon be used for reconnaissance on small UAVs

DOE/Sandia National Laboratories : 08 December, 2006  (Technical Article)
Researchers at the National Nuclear Security Administration
“What’s new is that the miniSAR is flying and working just as it should,” says Armin Doerry. Doerry, together with co-project leads Dale Dubbert and George Sloan, created the current approach for the miniaturized SAR several years ago.

Over the past year the trio and a core team of about 10 Sandia engineers finished development of the technologies that make up miniSAR, including integration of the radar subsystems and completion of the system software.

MiniSAR is less than one-fourth the weight and one-tenth the volume of SARs that currently fly on larger UAVs such as the General Atomics’ Predator. It has the same capability as the larger SARs of making fine-resolution images through weather, at night, and in dust storms. It is also “every bit as complex” as the few-hundred-pound systems currently flying, Doerry says

Small and lightweight, it can be put on airborne platforms that are one-tenth the cost of UAVs required for the larger SARs. It will also have a lower manufacturing cost than its larger cousins.

“MiniSAR is smaller and cheaper without sacrifice of performance,” Dubbert says.

MiniSAR took its first images on May 10 when it was flown on a Twin Otter aircraft owned by NNSA. This was followed by three weeks of image collection at various locations over Kirtland Air Force Base near Albuquerque.

Currently the miniSAR is connected to an operator control computer and data recorders on board the plane. The computer and data recorders will eventually be placed in a ground station, allowing the miniSAR to function on the smaller UAVs.

The miniSAR consists of two major subsystems: the Antenna Gimbal Assembly, the pointing system that consists of the antenna, gimbal, and transmitter, and the Radar Electronics Assembly, the signal generator, receiver, and processors. The AGA transmits and receives the radar signal. The REA is the electronics package that generates the radar signals, controls the system, processes the data, and transforms it into an image.

The researchers expect the miniSAR to shrink to under 20 pounds in the short run. In the longer term, the team is working to exploit Sandia microsystems technologies (at MESA, the Microsystems and Engineering Science Applications complex), further shrinking miniSAR to as little as 5 to 10 pounds.

While miniSAR will initially be used for reconnaissance on small UAVs that can carry a payload of 50 pounds, it may also be used for precision-guided weapons. However, the cost and size of miniSAR will need to be reduced even more for weapon applications.

Sandia is negotiating license agreements with several military subcontractors, which would build the miniSARs in volume.

“While initial interest has been tremendous, we are looking for a long-term partner that not only wants to build them, but also has the vision to work with us on continuing enhancements,” Sloan says.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 NewMaterials.com
Netgains Logo