Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
News

TAD 3 is ideal for wide range of weighing, batching, and other process control applications

Vishay Electronic : 28 April, 2006  (New Product)
Vishay Intertechnology, Inc. announces the introduction of the new Vishay Nobel TAD 3 batch-capable weighing controller. The TAD 3, which can store up to 30 recipes with 34 lines, adds extra processing power to provide faster response and extra conversion modes. It also enables developers to leverage a large library of over 250 special programs, which allow all TAD-series devices to be quickly programmed for virtually any industrial application.
Vishay Intertechnology, Inc. announces the introduction of the new Vishay Nobel TAD 3 batch-capable weighing controller. The TAD 3, which can store up to 30 recipes with 34 lines, adds extra processing power to provide faster response and extra conversion modes. It also enables developers to leverage a large library of over 250 special programs, which allow all TAD-series devices to be quickly programmed for virtually any industrial application.

The TAD 3 can support up to eight 350-ohm load cells, making it suitable for multi-ingredient batching, as well as for hopper scales, packing scales, bag fillers, and many other applications. Batching is for a maximum of six ingredients, with coarse and fine-feeding phases supported. The excitation voltage is 9.5 V with one or two transducers attached, or 7.5 V with four transducers. System accuracy is from 1 part in 10,000 to 1 part in 1,000,000 at 1.0 mV/V, depending on the selected update rate.

The TAD 3 supports standard MODBUS RTU communications via its serial port, as well as serial RS232, 422 or 485, with data communication speeds up to 115.2 kbaud, making the new unit suitable for many advanced process control applications.

The required panel cut-out of 92 mm x 186 mm, combined with the mounting depth of 140 mm, enables a compact installation that gives panel designers extra flexibility. The clear LCD display and membrane keypad allow the unit to be used under a wide range of lighting conditions, and in environments where splashes, steam, and similar hazards are commonplace. Menu-driven set-up, via alphanumeric instructions in the operator?s own language, allows calibration to be performed quickly and easily. Set-up and calibration can be performed via a PC, using the version of deltaCOM provided with the TAD 3. A full version of the deltaCOM program is available separately.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo