Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Advanced Composites
LeftNav
Aerospace
LeftNav
Amorphous Metal Structures
LeftNav
Analysis and Simulation
LeftNav
Asbestos and Substitutes
LeftNav
Associations, Research Organisations and Universities
LeftNav
Automation Equipment
LeftNav
Automotive
LeftNav
Biomaterials
LeftNav
Building Materials
LeftNav
Bulk Handling and Storage
LeftNav
CFCs and Substitutes
LeftNav
Company
LeftNav
Components
LeftNav
Consultancy
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
 
Moulds
Pickout cam allows for lengthy side-action pulls
Moulds : 10 November, 2013
Protomold has increased its capabilities to support longer side-action pulls, or pickout cams. Where at one time, the maximum length for side actions was limited to 74mm, extensions are now offered up to 200mm dependent on the geometry of the mould. The original cam is still used to facilitate the extraction of the cam, which would be physically difficult to pull out by hand without the mechanical assistance. The operator then places the cam back in the mould and the process starts again.
 
Sandcastles and plastic parts
Moulds : 31 October, 2012
Ever wonder why the little plastic buckets kids use at the beach have tapered sides? Hint: it isn't for hauling water. It's for that other popular beach pastime of the pre-pre-teen set: making sand castles. What does that have to do with plastic moulding?
 
Axxicon: Living up to the legend
Moulds : 14 April, 2007
Guangdong Yuedong Magnetoelectric Co. Limited is one of the first movers in China in the CD-R and DVD-R replication business
 
Your valuable mould parts refurbished in 2 days?
Moulds : 13 April, 2007
It happens with the: Axxicon Parts Exchange Service! Refurbished mirrors and other mould parts available 'off the shelf'
 
Axxicon Introduces X-Technology for new optical disc formats and high speeds
Moulds : 12 April, 2007
Axxicon
 
Axxicon Introduces X-Technology for new optical disc formats and high speeds
Moulds : 11 April, 2007
Axxicon
 
STX & SFX: a perfect match for each format/machine combination
Moulds : 10 April, 2007
Based on the proven ST and SF technology, Axxicon introduces a new generation of moulds which are ready for the future. New disc and market developments require continuous innovations in moulding technology.
 
New owners for Axxicon Mould Technology
Moulds : 11 June, 2004
Axxicon Mould Technology has been acquired from Mikron Technology Group by its current Management Team, supported by Gilde Participaties. The selling price is EUR 27,5 million
 
Honeywell standardises specimen mouldings with Axxicon AIM mould system
Moulds : 01 June, 2004
Honeywell's use of the AIM Mould System ensures that quality control, quality assurance and R&D studies and tests meet all present-day industry standards, yet provide the flexibility to adapt to other existing or new to be introduced standards on a local or worldwide scale.
 
Axxicon Moulds Helmond strengthens customer support with new appointments
Moulds : 18 May, 2004
Axxicon Moulds Helmond strengthens its customer support with the appointments of new sales representatives Maurits van Linder and John van der Laan.
 
Shaping your ideas
Moulds : 20 April, 2004
Axxicon Mould Technology has announced its intention to focus on the production of Customer Specified Moulds.
 
ST-mould for production of all DVD formats continues to set standard
Moulds : 20 April, 2004
Since its first introduction in 2002, the Axxicon ST-mould for the efficient production of all DVD formats continues to set the standard. To date more than 600 ST-moulds have been installed world-wide.
 
SF-mould for efficient production of DVD and CD-R formats
Moulds : 20 April, 2004
Following the success of the Axxicon ST-mould in 2002, Axxicon Moulds Eindhoven is to introduce the SF-mould for the efficient production of the DVD formats as well as CD-R.
 
Future Technology Engineering B.V . appoints Arie Brouwer, General Manager
Moulds : 20 April, 2004
Future Technology Engineering B.V., the Nuenen (Netherlands)-based specialists in design and engineering of production systems, announces the appointment of Arie Brouwer to the position of General Manager.
 
AIM for 2K gives consistent test specimen in a standardised mould
Moulds : 12 March, 2004
In order to offer the industry a solution to generate consistent test specimen in a standardised mould lay out Axxicon Mould Technology now introduces the 2 shot test mould system to the market in order to establish a foundation for future standardisation of test procedures.
 
Axxicon produces multi-cavity mould for medical spray cap
Moulds : 11 February, 2004
Axxicon Mould Technology has developed a high performance multi-cavity mould for the production of a medical spray cap.
 
Multi-cavity mould system delivers assembly parts productivity
Moulds : 03 December, 2003
Axxicon Mould Technology has developed a multi-cavity mould system capable of producing parts that would normally require several finishing operations
 
Toyo introduces new machine for optical disc production
Moulds : 09 April, 2003
Toyo Machinery & Metal Co. has launched a new machine for the production of optical discs, especially DVDs. The new machine is the result of the co-operation between Toyo and Future Technology Engineering (FTE). Toyo provided in-depth knowledge of electrical injection moulding machines. FTE contributed extensive mould and processing know-how.
 
22,000 DVD-discs a day on one mould
Moulds : 11 April, 2002
The S-Mould from AXXICON is proving to be a huge success for the effective production of Audio/ROM, CD-R and DVD-R. Introduced only 18 months ago, today the mould is meeting the specific needs of replicators by demonstrating that it is possible to achieve cycle times of around 3 seconds on a range of machines, both electric and hydraulic. For audio discs, a production of 25,000 a day has been achieved.
 
Introducing the STDR mould for DVD-R
Moulds : 09 April, 2002
Building on its successful new generation S-Mould, AXXICON Moulds has introduced a mould for the efficient production of the DVD-R format: the STDR Mould
 
Giving personal care manufacturers the edge
Moulds : 08 November, 2001
Axxicon Moulds Cleveleys, part of the Axxicon Mould Technology Group, has produced a series of moulds for the production of disposable razor handles. Axxicon has produced over 200 cavity sets for use in a number of manufacturing locations worldwide.
 
Moulds for two component parts bring remarkable efficiency
Moulds : 08 November, 2001
Axxicon Mould Technology Group has the capability and the experience to support customers in the development of complex high volume moulds for two-components moulding.
 
Launch of the
Moulds : 01 June, 2001
Axxicon has launched the
 
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 NewMaterials.com
Netgains Logo